Danny N Tran

Email: ad3yfy@r.postjobfree.com

Phone: 818-***-****

PROFESSIONAL EXPERIENCE

EDD

**/**** - **/**** *** Program Checker.

. Review all Conduct Unemployment Insurance (UI) eligiblity

. interviews, review and check all documents.

create inspection reports, first article reports.

.Determine elligibility for UI benefits in accordance with

.laws, reglation and policies.

.Interpret and apply laws, policies and precedent to

decisions consistently to individual cases.

. Gather and disseminate labor market information to employeres and applicants.

.Assist job seekers in meeting their employment goals or refers them to partner resources.

10/18 –08/19 Zodiac Aerospace Inflight

Mechanical checker and Inspected (Contract)

•Utilized SolidWorks to design interconnect and connector projects as required by customers. Pro E Cre09, mCOSMO

•Supported engineering development projects, and proposal activities.

•Provided technical check and inspected 3D design models, based on 2D sketches and other design requirements.

•Ensured standardization of products and engineering processes. create inspection reports. Investigations.

•Familiar with 3D and CAD design, Drafting demesion, platforms such as Pro-E, AutoCAD, and SolidWorks.

•Utilized GD&T, ANSI Y 14.1 to ensure dimensional accuracy and drawing completeness.

•Reviews the blueprints, Specitication and Checked Red Lines for other Designers & Drafters.

•Checked all the connectors, Responsible for incorporating design changes. Checked Red Lines for other Designers & Drafters. Use standard measuring equipment such as calipers, micrometers, height gages, dial indicators

• .

2/17-8/18 Raytheon Space and Airborne Systems

Mechanical Checker, (Contract)

•Used SolidWorks, 3D and laid out detail. Creo, GD&T, and modified Aerospace System, . Pro E Cre09

•Checked the details of design work including assembly layouts & dimensional tolerances.

•Corrected and marked red lines for all designers and drafters. Use standard measuring equipment such as calipers, micrometers, height gages, dial indicators, etc.

•Checked Design aerospace Design including details structural for aircraft.

•Review the blueprints to fit check units for projects as required by customers

•Review all Production scale solutions for elastomers and plastics. Adhesives, metals, and ceramics are used in electrical and fiber optic interconnect systems.

•Work across teams and skill sets to implement solutions related to wires, cables connectors, wire harnesses, or any material/components of such products.

•Designed tooling plate for drilling holes in the components of aerospace

•Ensured standardization of products and engineering processes.

•Utilized GD&T, ANSI Y 14.1 to ensure dimensional accuracy and drawing completeness.

•Responsible for incorporating design changes (ECN, EOs, and ECOs).

•Engine design for satellites, and the components.

08/15-9/16 Meggitt Safety System, Simi Valley, CA

Mechanical Inspector and checker (Contract)

•Utilized SolidWorks to design interconnect, and connector projects as required by customers.

•Supported engineering development projects, and proposal activities.

•Provided technical expertise as the creator of 3D design models, based on 2D sketches and other design requirements.

•Ensured standardization of products and engineering processes. Create inspection reports. Investigations

•Familiar with 3D and CAD design drafting platforms such as Pro-E, AutoCAD, and SolidWorks.

•Utilized GD&T, ANSI Y 14.1 to ensure dimensional accuracy and drawing completeness.

•Checked Red Lines for other Designers & Drafters. Use standard measuring equipment such as calipers, micrometers, height gages, dial indicators, etc.

01/15- 07/15 Eaton Aerospace Corporation, Camarillo, CA

Mechanical checker

•Utilized Creo 2.0, SolidWorks, 3D to design aerospace Value of Hydraulic, actuation, and pneumatic systems for aircraft.

•SolidWorks Designed interconnects 3D laid out retail and connectors projects as required by customers

•Supported engineering development projects, and proposal activities.

•Provided technical expertise as the creator of 3D design models, based on 2D sketches and other design requirements.

•Ensured standardization of products and engineering processes.

•Familiar with 3D and CAD design 3D and platforms such as Pro-E, AutoCAD, and SolidWorks.

•Utilized GD&T, ANSI Y 14.1 to ensure dimensional accuracy and drawing completeness.

•Checked Red Lines for other Designers & Drafters.

•Checked all the connectors, Responsible for incorporating design changes (DCN, EOs, and ECOs).

01/14- 11/14 Boeing Aerospace Satellite/Antenna System

Mechanical Checker and Inspector

•Utilized Creo 2.0 and Pro E Cre09 and SolidWorks, 3D

• to design and modify Aerospace Satellite/Antenna System, Payload system; Designs included structural.

•Designed the Mounting brackets and struts using Pro-E.

•Engine design for satellites, antenna, and the components designed.

•Performed detailed design work including assembly layouts and dimensional tolerances.

•Corrected and checked red lines for all designers and drafters.

•Designed aerospace Hydraulic, actuation, and pneumatic systems for aircraft.

•Designed fit check units for projects as required by customers

• Checked Red Lines for other Designers & Drafters. Use standard measuring equipment such as calipers, micrometers, height gages, dial indicators

•Ensured standardization of products and engineering processes.

•Utilized GD&T, ANSI Y 14.1 to ensure dimensional accuracy and drawing completeness.

•Responsible for incorporating design changes (DAF, EOs, and ECOs).

09/10-03/12 Emhart Technologies /Fastening Aerospace Systems, Gardena, CA

Manufacturing checker and Inpector (Contract)

•Utilized aerospace fasteners utilizing SolidWorks and AutoCAD. With Aluminum/ Steel components. Standards. ANSI Y 14.5.

•Responsible for incorporating design changes (DAF, EOs, and ECOs).

•Inspected and checked drawings for dimensional tolerances and compliance with Board (MRB).

•Prepared documentation packages for submission to internal company standards.

•Prepared the Product drawing and released it on the floor and to engineering standards.

•Corrected red-line drawings for dimensional tolerances and compliance with engineering standards.

•Assisted in the evaluation of nonconforming hardware for the Material Review manufacturing problem. Implement the solution in a structured.

•Assisted with qualification testing and the preparation of qualification test reports.

•Checked Red Lines for other Designers & Drafters. Use standard measuring equipment such as calipers, micrometers, height gages, dial indicators

01/10-08/10 Brice Seating - A Timco Aerospace, Pacoima, CA

Mechanical Design Drafter

•Check, inspected the Airplane seating for aerospace utilizing SolidWorks and AutoCAD for the new Boeing 787.

•Responsible for incorporating design changes (EO, & EONs). Aluminum/ Steel component. Standards. ANSI Y 14.5.

•Performed detailed design work including assembly layouts dimensional tolerances and electromechanical switches.

•Corrected red-line drawings for dimensional tolerances and compliance with engineering standards.

•Prepared documentation packages to design a new product and redesign the old one. Assembly of all the drawings, based on internal company standards.

•Performed the methods with manufacturing, solving the problem skill on the floor and implementing solutions in a structure.

•Designed Hydraulics, actuation, and pneumatic systems for aircraft, Motors, and Linear Drives.

01/07-8/09 Alcoa Fastening Aerospace Systems, Torrance, CA

Product checker and Inspector

•Check and inspected, Designed aerospace fasteners utilizing Pro E, SolidWorks, Cadkey and AutoCAD. With Aluminum/ Steel components. Standards. ANSI Y 14.5.

•Responsible for incorporating design changes (DAF, EOs, and ECOs).

•Inspected and Checks drawings for dimensional tolerances and compliance with Board (MRB).

•Prepared documentation packages for submission to FAA for TSO approval based on internal company standards.

•Prepared the test precision electro-mechanical, coaxial switches. Semiconductor, engineering standards.

•Assisted in the evaluation of nonconforming hardware for the Material Review manufacturing problem. Implemented solution in a structured.

•Checked Red Lines for other Designers & Drafters. Use standard measuring equipment such as calipers, micrometers, height gages, dial indicators

•Assisted with qualification testing and the preparation of qualification test reports.

01/97- 05/01 PANAVISION International, Woodland Hills, CA

Mechanical Drafter and checker

•Checks, inspected the plastic injection molding, SMT PCB, R&D, conceptual design, and designed professional film camera, and prototype development. Various size positions and antenna, remote system.

•Performed mechanical analysis of a system. Analysis of moving and rotating. Mechanisms and packaging of electromechanical, electrical, and microwave component.

•Checked red-line drawings for dimensional tolerances and compliance with engineering standards. ANSI Y14.5

•Assisted with qualification testing and the preparing of qualification test report

•Cadkey, Pro E –3D Design, SolidWorks, Modify design, Redesign drawings, Structural analysis, electronic packaging.

•Inspected, checked, corrected, and updated all design ECO drawings as well B.O.M Check Orders.

•Pro E, Cad Key Design, Performed Layout Detail on a product or Parts based on internal company standards.

•Tools & Fixtures Design, control all new and old drawings for Production, contact with the vendor.

•Designed the Gears, Motors, and Hydraulics with the remote control, Pneumatics and Linear Drives.

•Prepared the test precision electromechanical, coaxial switches, semiconductors, manufacturing problems and electronic and electro-optical.

SKILLS

Tool: PC, HP, UNIX Sun workstation, MS Excel, MS Word, MS Project, MS PowerPoint, A+ Training

Software: Pro-E, Creo 2.0, Mechanical Desktop, Auto CAD 14- 2010, SolidWorks 06-10, and Cadkey

EDUCATION

Bachelor of Science, Industrial Mechanical Design

California State University, Los Angeles, CA

Contact this candidate