*

CURRICULUM-VITAE

Mohammad Mashkoor

Bharti Enterprises

Lakhi Gate

Saharanpur -247001, India

Tel: - +918*********, +91-983*******

E-mail: - ad3w80@r.postjobfree.com, ad3w80@r.postjobfree.com SUMMARY

Results oriented Mechanical Engineer with 20+ years’ experience in site execution, estimation, infrastructure, design and engineering work in construction industries. Multi-disciplined versatility with superb trouble-shooting and analytical skills to assess problems and provide expert on-site reliability solutions. Excellent communication skills. Estimate, design, schedule, and oversee all phases of new construction from initial conception through successful startup. Analyze energy efficiency, identify problems, assess environmental impact, calculate solutions, and generate capital expenditure versus projected savings reports.

HIGHLIGHTS

Responsible for Checking of Mechanical

Work according to UPC, NPC, NFPA,

ASHRAE, ASME, SMACNA Codes and

Project Specification.

Responsible for Study, Finalizing the Shop

Drawings, Calculations for Plumbing

works, HVAC works, Fire-Fighting works,

Overhead Cranes, Irrigation works,

Medical Work, STP and Elevators.

Responsible for checking of installation,

Testing and Commissioning work for

Plumbing works, HVAC works, Fire-

Fighting works, Irrigation works, Medical

Work, STP, Central Chiller Plant and

Elevators.

Familiar in Hourly Analysis Program

(HAP Software)

Familiar in manual calculation for

plumbing system, pumps.

Familiar in FM-200 Calculation,

sprinkler system

Familiar in sound attenuation for AHU

& FCU system (SNAP Form)

Familiar in design Domestic water

heater

Familiar in Duct Designing system

Familiar in Design of Piping.

ACADEMIC QUALIFICATION

S.S.C from St.Mary’s Academy in C.B.S.E board with First class in 1994. H.S.S.C from St.Mary’s Academy in C.B.S.E board with Second class in 1996. TECHNICAL QUALIFICATION

B.E. in Mechanical Engineering from M.J.P.Rohailkhund University With 70% marks in 2000. CERTIFICATE OF ACHIEVEMENT

Awarded an edX verified certificate of achievement in ET.3034TU: SOLAR ENERGY from online learning initiative of Delft University of Technology through edX with 92% grade.

Awarded an edX verified certificate of achievement in CTB3365DWx: Introduction to Drinking Water Treatment from online learning initiative of Delft University of Technology.

Awarded an edX verified certificate of achievement in CTB3365STx: Introduction to Treatment of Urban Sewage from online learning initiative of Delft University of Technology.

Awarded an edX verified certificate of achievement in Project101x: Introduction to Project Management from online learning initiative of The University of ADELAIDE WITH 93% grade. EXPERIENCE

January 2019 to continue

Working as a Project Manager / Director in Bharti Enterprises for 3 residential projects in Saharanpur, Uttar Pradesh, India

Quantity estimation and HVAC designing using HAP 4.9 for M.J.S. Medical and Research Institute Private Limited, Saharanpur

Responsible for all activities with planning and following contractors for complete work of the building including designing, planning, procurement of all material, execution of work, fabrication of required channels, angle steel doors, railing etc 2

Respondible to planning, operation, budgeting, cost control, inventory control and meet market deadlines with achieving targets and goals in FMCG business EXPERIENCE

January 2018 to October 2018

Working as a Mechanical Department Head in Saudi Building Technik Maintenance Company, Prince Abdullah Al Faisal Stadium, Jeddah, KSA (Expansion & Renovation Project) Working as a MEP Manager in Saudi Al Rajhi Group, Labor Housing Project in 2nd Industrial City, Jeddah, KSA (Shutdown Project)

RESPONSIBILITY

Reporting to directly to General Manager

Responsible for fabrication, welding and measurement of different frame for installing equipments and machinery, as well tin shade with supports

Responsible for installation, testing and commissioning work for Central Kitchen (Restaurant of 13561 m2) with fire detection system.

Responsible for testing and commissioning work for chiller plant of capacity 5000 tons water cooled, SB-1 building of area 4916 m2 and seven residential building. Responsible for installation, testing and commissioning work for cables procuring, pulling, with cable tray for different equipment’s and also sizing for chiller in coordination with the chiller supplier Responsible for installation, testing and commissioning work for different panels (all pumps cooling tower and other indoor equipment’s with lighting system, MCC panels Responsible for installation, testing and commissioning work for lighting systems Responsible for testing and commissioning work for infrastructure works Responsible for coordination with different trades i.e., civil and architectural Responsible for testing and commissioning work for pumps i.e., primary and secondary pumps for chiller system and condenser pumps for cooling tower Responsible for testing and commissioning work for cooling tower i.e., alignment, rotation of fans, adjustment of levels of water in the basin, resizing the suction in order to avoid air in suctions. Installation Air vents in the network

Responsible for running the chiller (1000 ton each capacity) Responsible for testing and commissioning work for indoor units and bring the cooling inside the buildings.

Responsible for water and chemical flushing in water pipe lines, firefighting pipe line and chilled water pipeline (supply and return lines

Responsible for testing and commissioning work for Domestic Water Pumps, RO system, Fire Fighting Pumps and sump pumps.

Responsible for testing and commissioning work for all Pipelines i.e., Potable water, drainage water, flushing water, firefighting water and Chilled water (supply and return) pipe lines Responsible for following contractors for the work, design, commissioning and finalizing invoices, deduction and new proposals

Responsible for Installation, testing and commissioning work for duct work, diffusers, grills, fire damper, access doors, volume dampers, firefighting work and network with fire alarm system, chilled water network with BMS network and plumbing work

Responsible for meditating the procurement department for the materials requirements on site to achieve the target goal in a planned time period., January 2017 to December 2017

Working as a Project and Maintenance Mechanical Manager in Mahmood Saeed Glass Industry Company, Jeddah, KSA

3

RESPONSIBILITY

Installation of Furnace of capacity 160 TPD supplied from Horn Glass Company, Germany Installing blower & combustion blower recommended by glass manufacturing companies Installing acetylene station with pipe line to work station, Installing plate heat exchangers,

Installing and weekly testing fire fighting lines, fire hose cabinets and fire hydrant & weekly testing of fire fighting pumps and maintaining fire extinguisher expiry data for refilling and allocation as per hazardous and all area allocated in building map

Installing water lines for cooling down temp. of various glass lines, glass waste lines and HVAC chiller Schedule checking high fuel diesel line for furnace Schedule checking and replacing damage of lpg lines, pumps, distributors regulators and lpg tanks Installing and schedule checking of pipelines and drain lines and maintaining of regular flow for air compressor of atlas copco, centac, kaeser, gardner denvyor, elgi Schedule checking and installation of pressure pipe lines and drain lines of vacuum pump from pneumofore Italy, kaeser

Schedule checking and installation cullet conveyors, conveyors, installing lehr for glass with lpg pipe line connections and daily basis maintenance activities. Responsible for fabrication, welding and measurement of different frame for installing equipments and machinery, as well tin shade with supports

Schedule checking and installation of air condition units with chillers Schedule checking and installation cooling tower

Maintaining spare parts inventory for daily and weekly uses Planning and finalizing new project within a premises Coordinating with electrical department for smooth working flow Maintaining equipment data i.e., crusher, bobcat and other equipments EXPERIENCE

September 2013 to December 2016

Working as a Mechanical Engineer in Taibah University, Infrastructure and Utilities Project in M/s Saudi Consulting Services, Madinah, KSA with Ministry of Higher Education project

(Client).

Infrastructure and Utilities

for complete university

Central Chiller Building Sewage Treatment Plant of Capacity 2300 cu.m/d

12 Number Student and

Teacher Housing Building

Community Center Building Multi Car Parking Building December 2010 to August 2013

Working as a Mechanical Engineer in King Saud University, cost 10 billion Saudi riyals, construction of 69 units of medium rise buildings(Girls Campus) in M/s Saudi Consulting Services, Riyadh, KSA with Ministry of Higher Education project (Client). RESPONSIBILITY

Responsible for Checking of Mechanical Work according to UPC, NPC, NFPA, ASHRAE, ASME, SMACNA Codes and University Specifications.

Responsible for Checking of Mechanical Work in eleven Buildings College of Applied

Science

College of Pharmacy College of Dentistry Auditorium complex Sport Complex Staff Housing Student Housing 4

bldg.

Central Kitchen

Responsible for reporting to Resident Engineer, Construction Manager, Project Manager and Project Director.

Responsible for review Design Drawings, Shop drawings Approvals, Material Approvals, Project Management, Site Supervision, Testing and Commissioning of works. Responsible for Checking of Mechanical Work for external work i.e., Installation, Testing and Commissioning of Sanitary Drainage, Storm Drainage, Fire Hydrant, Potable Water, Lift Station, STP, Pumps and accessories, SNG system and Irrigation System. Responsible for preparing snag list, punching and remaining work list in order to provide a clear vision to the management and contractor.

Responsible for checking of medical work executed as per approved drawing, material submittal and calculations.

4

Responsible for checking of installation, Testing and Commissioning work for Plumbing works, HVAC works, Fire-Fighting works, Irrigation works, Medical Work and Elevators. Responsible for checking of installation, Testing and Commissioning work for Sump pumps, Domestic Water Pumps, Fire-Fighting Pumps and Circulation pumps. Responsible for Checking of Mechanical Work in Sewage Treatment Plant 1150 m3/day. Responsible for checking of Chemical Flushing and Water Flushing for pipes. Responsible for checking of Installation, Testing and Commissioning of Control air Valve and maintaining +ve and –ve pressure in the lab areas

Responsible for checking of Installation, Testing and Commissioning of Medical Exhaust Fans, Normal Exhaust Fans, Kitchen Exhaust Fans, Fresh Air Fans and stair Pressurization fans. Responsible for checking of Installation, Testing and Commissioning of VAV.s and VAVR’s (variable air volume terminal and variable air volume reheat terminal) Responsible for checking of Installation, Testing and Commissioning of Compressor and Vacuum plant units (Medical gas plant room) and phantom lab equipment and prostedontic lab equipment with network.

Responsible for checking of Installation, Testing and Commissioning of Oxygen and Nitrogen plant with network.

Responsible for checking of Installation, Testing and Commissioning of Ionized water equipment and network from Millipore.

Responsible for checking of Installation, Testing and Commissioning of SNG network. Responsible for checking of Installation, Testing and Commissioning of FM-200 (HFC-227) System. Responsible for checking of Air, Water balancing work and adjustment of PRV (pressure reducing valve) for Domestic water supply and fire fighting network. Responsible for checking of installation and commissioning of Bio-Safety Hood, Fume Hood in medical area and Kitchen Hood in central kitchen and Cafeteria. Responsible for coordination between BMS and fire alarm system. Responsible for comparisons, analysis for products, Materials, Suppliers and Sub-Contractor. Responsible for Study, Finalizing the Prequalification & Technical Submittal for Sub-Contractor and Materials after the analysis according to the Codes & Specifications. Responsible for Study, Finalizing the Shop Drawings, Calculations for Plumbing works, HVAC works, Fire-Fighting works, Overhead Cranes, Irrigation works, Medical Work and Elevators. Responsible for checking Bill & invoices, Take off Sheet, Cost Estimation, Variations Order. Responsible for preparing & following Day to Day work Report and Schedule according to the planned work schedule in order to push the work.

Responsible for Supervising Contractors in order to push the work and acting a medium between Management and the work status.

Responsible for Finalizing the Monthly Billing as per the work and contracts. EXPERIENCE

November 2007 to November 2010.

Working as a Sr.Project Engineer in Jeddah Headquarter Branch & Radio Studios (Ministry of Culture & Information) Project, Jeddah (3 phase project), and executed 1st phase cost 150 million sar, in M/S Al Osais Contracting Co., Dammam. KSA (Total Area for phase - I 12,884 m2, Building Area 4.106 m2, Sidewalk & Walkway 4,513 m2, Driveways 2,942 m2 & Plantings 1,324 m2).

RESPONSIBILITY

Responsible for Preparing of Mechanical Work according to UPC, NPC, NFPA, ASHRAE, ASME, SMACNA Codes and MOI Specifications.

Responsible for comparisons, analysis for products, quatations and negotiate a vendors, items and description.

Responsible for Study, Finalizing & Forwarding the Prequalification & Technical Submittal for Sub- Contractor and Materials after the analysis according to the Codes & Specifications to the Consultant for the Approval.

Responsible for Study, Finalizing & Forwarding the Design, Drawings, Calculations for Plumbing works, HVAC works, Fire-Fighting works, Overhead Cranes, Irrigation works and Elevators for the Projects to the Consultants and Client.

Responsible for installation, Testing and Commissioning work for Plumbing works, HVAC works, Fire-Fighting works, Overhead Cranes, Irrigation works, and Elevators. Responsible for preparing Bill of Quantity, Take off Sheet, Cost Estimation. Responsible for preparing & following Day to Day work Report and Schedule according to the work schedule submitted to Client in order to push the work. 5

Responsible for Supervising Sub Contractors in order to push the work and acting a medium between Client, Consultant and the work status.

Responsible for Supervising Vendours, Suppliers to bring the Material on the Job Site in order to proceed with the Schedule.

Responsible for procuring Quality & Quantity of products at a required time Period. Responsible for Finalizing the Monthly Billing as per the work and contracts between us and Client. Responsible for Finalizing the Monthly Billing as per the work and contracts between us and our Sub- Contractors.

Responsible for Installation of Overhead Crane Capacity 14 Tons (Double Girder). Responsible for Study, Finalizing and submission of any Variation order occurred according to the requirement from Client, Consultant or changed due to calculations. Responsible for external work i.e., Installation, Testing and Commissioning of Sanitary Drainage, Storm Drainage, Fire Hydrant and Irrigation System for area around 55,000 sq.mtr. Responsible for installation, Testing and Commissioning work for Sump pumps, Domestic Water Pumps, Fire-Fighting Pumps and Circulation pumps.

Responsible for Chemical Flushing and Water Flushing for pipes. Working as a Sr.Project Engineer in 500 Bed Hospital (Ministry of Health) Project, Baljureshi(BAHA), cost 300 million Saudi riyals in M/S Al Osais Contracting Co., Dammam. KSA

Responsible for installation, Testing and Commissioning work for Plumbing works, HVAC works, Fire-Fighting works, Irrigation works, Medical Work and Elevators. Responsible for Designing of Rain Water Trench & PVC Pipe for Baljuresi(BAHA) Site & Catch Basin for Area 124886 m2 as per UPC.

Responsible for Designing of Kitchen Hood for Baljuresi(BAHA) Main Hospital. Responsible for Designing of Thrust Blocks in fire fighting for Baljuresi(BAHA) Site as per NFPA. Responsible for Tendering & Bidding work, cost Estimation & analyzing Responsible for preparing SPARE PARTS DATA PACKAGE i.e., SPDP for Saudi Aramco, Khurais Project.

Responsible for Designing of Ducts, Diffuser, Liner with low noise as per ASHRAE and supplier catalogues, Pipelines for water supply and drainage as per UPC. Responsible for Designing, Selection & Installation of Booster Pumps, Submersible Pump according to Head and GPM.

Responsible for Designing of Cooling and Heating Load according to Ventilation System as per ASHRAE (using HAP software).

Responsible for Designing of Sound Attenuator (using SNAP Form from ATAI/LINDAB software). Responsible for Supervising FM-200 (HFC-227) work as per NFPA. Responsible for Supervising Fire Fighting work as per NFPA. Responsible for Installation of Mitsubishi Elevators Responsible for Installation of Chillers, AHU’s, DX-Split A/C’s, FCU’s and Exhaust fans. Responsible for external work i.e., Installation, Testing and Commissioning of Sanitary Drainage, Storm Drainage, Fire Hydrant, LPG system and Irrigation System for area around 125,000 sq.mtr. Responsible for installation, Testing and Commissioning work for Sump pumps, Domestic Water Pumps, Fire-Fighting Pumps and Circulation pumps.

Responsible for checking of Chemical Flushing and Water Flushing for pipes. ACHIEVEMENT

Receive two Appreciations E-mail from Saudi Aramco. Receive Appreciations from Project Manager, Sub-Contractors, Consultants and Clients. EXPERIENCE

1st August 2004 to October 2007.

Working as a Manager in M/S Bharti Foods Industries, Saharanpur. RESPONSIBILITY

Responsible for supervision in installation, erection and commissioning of machinery, construction of blocks sheds fabrication of steel blocks, line alignment and balancing. Responsible for bidding, tendering, estimation of quantity and execution of bids. Responsible for plumbing work as per drawing and specification, i.e., sewage lines, sanitary works, HVAC, lightening, fire fighting lines or pipes.

Responsible for marketing, planning and organizing, customer focus, achievement orientation, team effectiveness, negotiation and impact, communication, capability building, collection. 6

Responsible for Production optimizing, well monitoring and management, Overview of process facilities and capacity limitations, Identifying measures for increased production, a contact between the subsurface community and operations. Well maintenance and data collation, Planning and carrying out well maintenance, including chemical treatment, Planning and carrying out production logging, Analysis of production logs and pressure build-up tests, Hands-on supplier cooperation, Well planning and choosing completion solutions, Technical production evaluations in early phase projects, Project follow-up in connection with technology development.. EXPERIENCE

1st May 2002 to 30 July 2004.

Working as a Production executive in M/S Sagar Pumps (p) Limited, Saharanpur. RESPONSIBILITY

Responsible for production schedule, preventive maintenance or operation machines e.g., D.G. sets Lathes m/cs, drill, m/cs, foundry fan, etc.

Responsible for inventory & quality check up for both pre-process & post-process material at various stages i.e., moulding, turning, buffing, etc

Supervision & technical audit of installation & trouble shooting of control system. EXPERIENCE

1st February 2001 to 30th April 2002.

Working as a production & inventory controller & customer service executive in M/S Monash International Limited Noida.

RESPONSIBILITY

Responsibility for Production & Inventory Planning of bio equipments. Responsible for tendering work, cost analyzing, exposure to consultancy & project work. Responsible for analyzing economy of selected companies on demand & providing the detail on stock market.

Responsible for preventive & breakdown maintenance of operation machines. PROJECT

I completed my project on SAFETY DESIGN FOR RAILWAYS that I completed during my last year of engineering in that I covered different factor of safety on comparing our railway with European railways.

SEMINAR

I deliver my seminar on Japanese management & International Marketing INDUSTRIAL TRAINING

I had completed my industrial training in BHEL, HARDWAR.during my training period I gain a lot as I seen practical working first time in my life, I think this training is the milestone in my life & I learned the way of right technical approach to the product. COMPUTER SKILLS

Operating system, MS DOS, MS office (MS word, MS Excel), basic knowledge of internet/e-mail, little exposure to dream weaver.

7

PERSONAL DETAILS

Father’s Name Mohd.Aslam

Telephone no. +91-897*******

Date of Birth 28th August 1977

Nationality Indian

Marital Status Married

Hobbies Swimming, Basketball, Reading Chess, Music, Meeting peoples

Passport no. W4180445 (issued from Dehradun)

Permanent Address 11/2207 Pul Kambohan, Barat Ghar, Saharanpur – 247001 (up) India

Skype ID mohammad.mashkoor

Date:-

Place:-

(MOHAMMAD MASHKOOR)

Contact this candidate