Wendell Cohelia

**** ********* **

Bessemer,Al **0

Mobile :

***-***

-6662

Email: ad3unw@r.postjobfree.com

Work Experience

Miller Contracting

Jan 2023- Present

Site Foreman

I am currently operating a niteshift crew on a conventional shaft. Im learning daily from the men due to all my experience is in underground mining .

Dec 2021-Jan 2023

Maxine Pratt

General Mine Foreman

Day shift mine foreman and section foreman

I direct face personnel in safely mining and extracting coal from the coal face using Continuous Miner units and the room and pillar method. Due to my experience with the Mine Safety and Health Administration I fill in within the safety department as needed and travel with the regulatory agencies. I plan out the cycle and daily task of miners and operators assigned to me and evaluate their performance and safety behaviors. I planned fireboss routes, recovery for equipment and belt line compents from old works also. Warrior Met

Aug 2019-Dec 2021

Day shift mine foreman and section foreman

I direct face personnel in safely mining and extracting coal from the coal face using Continuous Miner units and the room and pillar method. Due to my experience with the Mine Safety and Health Administration I fill in within the safety department as needed and travel with the regulatory agencies. I plan out the cycle and daily task of miners and operators assigned to me and evaluate their performance and safety behaviors.

Murray Energy Ken american and Pride Mine

Aug 2016- 2019

Day shift mine foreman and section foreman

I direct face personnel in safely mining and extracting coal from the coal face using Continuous Miner units and the room and pillar method. Due to my experience with the Mine Safety and Health Administration I fill in within the safety department as needed and travel with the regulatoryagencies. I plan out the cycle and daily task of miners and operators assigned to me and evaluate their performance and safety behaviors.

Blackhawk Mining. June 21 2015-Aug

2016

Day shift mine foreman and section foreman

I direct face personnel in safely mining and extracting coal from the coal face using Continuous Miner units and the room and pillar method. Due to my experience with the Mine Safety and Health Administration I fill in within the safety department as needed and travel with the regulatoryagencies. I plan out the cycle and daily task of miners and operators assigned to me and evaluate their performance and safety behaviors.

KenAmerican Resources. September 20th

2013-June 2015

Faceboss and Section Foreman

I direct face personnel in safely mining and extracting coal from the coal face using Continuous Miner units and the room and pillar method. Due to my experience with the Mine Safety and Health Administration I fill in within the safety department as needed and travel with the regulatoryagencies. I plan out the cycle and daily task of miners and operators assigned to me and evaluate their performance and safety behaviors.

Parton Brothers Contracting. November

11,2011-August 5,2013

Foreman and Equipment operator

I direct Mine personnel in daily mining tasks to maintain the condition of the mine . I work with and guide personnel during section moves, belt moves and belt backs during advance room and pillar mining and pillar recovery. Currently operate 488 Eimco and S&Sscoops to haul supplies to different areas of the mine. I use them to clean areas of the active working section. I operate an A.LLee Lo-Trac on a frequent basis cleaning under conveyor belts, blow dusting the mine roof and walls and placing palletized supplies in areas for use. I have operated Fletcher Roof Ranger Roof drills while working here and also Walk thru Platform Fletcher Roof Drills. I conduct Pre-shift and On-shift inspections of outby areas and the working section on a daily basis. Position jacks, timbers,or roof supports,and install casings, in order to prevent cave-ins. Reposition machines and move controls in order to make additional holes or cuts. Cut entries between rooms and haulage- ways. Observe indicator lights and gauges, and listen to machine operation in order to detect binding or stoppage of tools or other equipment problems. Replace worn or broken tools and machine bits and parts,using wrenches,pry bars, and other hand tools, and lubricate machines, using grease guns. Press buttons to activate conveyor belts, and push or pull chain handles to regulate conveyor movement so that material can be moved or loaded into shuttle cars or dump trucks. Move planer levers to control and adjust the movement of equipment the speed height and depth of cuts, and to rotate swivel-cutting booms. Cut slots along working faces of coal in order to facilitate blasting. Moving levers to start the machine and to control the vertical reciprocating drills. Drive mobile or track mounted cutting machines in mines and on construction sites. Ensure proper mining equipment maintenance and use. Perform a full range of task and operate a variety of equipment in underground mines. Experience includes extensive hands on mining experience that allows for

comprehensive knowledge of mining methods, equipment, and health and safety hazards. Knowledge of transportation of worker, ventilation in close spaces,ground control, roof control,work site environmental conditions that effect the health of workers, and or accident prevention. Coal Mine Safety and Health Administration January 2010-July 2011

Coal Mine Inspector

Specialized experience includes on-site safety/health inspection, analysis, monitoring, or evaluation work in occupational health, in mining or closely related industries, such as building construction, excavation, and heavy industrialplant settings. Examples of creditable experience in related non-mining work include work that provided the applicant with knowledge of ground controlat building sites, safe work site practices, and/or environmental conditions that affect the health of workers at foundries, mills, and other inherently dangerous industrial settings. For example, performance of safety and health inspection work at a steelmillwould qualify at this grade level, but agriculturalinspection work would not. At the GS-9 level(Surface and Underground): specialized experience includes hands-on mining experience that has provided the applicant with knowledge of the transportation of materials and workers, ventilation in closed spaces, ground control, roof control(for underground positions), handling and storage of hazardous materials, work site safety practices, work site environmental conditions that affect the health of workers, and/or accident prevention. United State Army April2006 –June

2009

AH-64 Pilot

Pilots and commands fixed wing and rotary winged utility aircraft under tacticaland non tacticalconditions. Operates aircraft during alltypes of metrological conditions during day, night, and under night vision goggles. Performs aircraft operations including rescue hoist, air assaults, internal – externalloads, and repelling procedures. May perform aerial reconnaissance and be used to transport passengers or cargo. Routinely participates in combat support training. Maintains current flight status in accordance with established training requirements, knowledge and skills are equivalent to FAAcommercial-instrument ratings on rotorcraft category aircraft. Knowledge and skills may be equivalent to other FAAcertificates/ratings or may be trained on additionalcategories of aircraft.

United States Army March 2003-

April2006

Hunter Army Airfield Georgia

MH-60LCrew Chief

Operates and maintains the M134 mini-gun system, computer based forms and record systems, along with a multitude of other specialequipment unique to the Special Operations

community. Provides technicalguidance and performs Aviation Unit levelmaintenance on a highly modified medium assault helicopter worth over $21million. Maintained assigned MH-60L helicopter at an operationalreadiness rate of 92% exceeding the Army standard by 17%. Performs organizational, Intermediate, and depot repairs, replaces, modifies and installs functional components, mechanicaland electro- mechanicalsystems in accordance with Maintenance Manuals, and Test Procedures to ensure airworthiness. The systems include, oxygen, pneumatic, hydraulic, environmental, egress and fuel systems. Performs rigging of controlsurfaces and services aircraft. Uses hand tools, power tools, gauges and test equipment. Follows and interprets engineering drawings, military specifications, standards, safety directives and maintenance manuals to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Documents work performed in aircraft forms, records and contract field team workbooks, assisted in the mentoring and training of peers and subordinates on air crew member progression. Retained 100% accountability for over

$21million in equipment while deployed to numerous localand overseas operations. Monitor employees’work levels and review work performance. Monitor tool and part inventories and the condition and maintenance of shops to ensure adequate working conditions. Recommend or initiate personnelactions, such as hires, promotions, transfers, discharges, and disciplinary measures. Counsel employees about work-related issues and assist employees, to correct job-skilldeficiencies. James Rivers Coal Company October 2002 –March

2003

Jeff KYUS

Miner Operator

During my time at this Mine I operated a Joy 14-10 continuous mining machine on a daily basis.Position jacks, timbers, or roof supports,and install casings,in order to prevent cave-ins. Reposition machines and move controls in order to make additional holes or cuts. Cut entries between rooms and haulage-ways. Observe indicator lights and gauges, and listen to machine operation in order to detect binding or stoppage of tools or other equipment problems. Replace worn or broken tools and machine bits and parts,using wrenches,pry bars, and other hand tools, and lubricate machines, using grease guns. Press buttons to activate conveyor belts, and push or pull chain handles to regulate conveyor movement so that material can be moved or loaded into shuttle cars or dump trucks. Move planer levers to control and adjust the movement of equipment the speed height and depth of cuts, and to rotate swivel- cutting booms. Cut slots along working faces of coal in order to facilitate blasting. Moving levers to start the machine and to control the vertical reciprocating drills. Drive mobile or track mounted cutting machines in mines and on construction sites. Ensure proper mining equipment maintenance and use. Perform a full range of task and operate a variety of equipment in underground mines. Experience includes extensive hands on mining experience that allows for comprehensive knowledge of mining methods, equipment, and health and safety hazards. Knowledge of transportation of worker, ventilation in close spaces,ground control, roof control,work site environmental conditions that effect the health of workers, and or accident prevention. Manalapan Mining August 1999 –

September 2002

High splint KYUS

Foreman and Equipment operator

I operated S&S 488 and 482 Scoops, EImco Roof bolt Drills. I operated Joy 14-09 and Joy 14-10 continuous mining machines on a daily basis. I directed personnel in mining tasks and practices to maintain the condition of the mine and the extraction of coal during this time

.Position jacks,timbers, or roof supports, and install casings, in order to prevent cave-ins. Reposition machines and move controls in order to make additional holes or cuts. Cut entries between rooms and haulage- ways. Observe indicator lights and gauges, and listen to machine operation in order to detect binding or stoppage of tools or other equipment problems. Replace worn or broken tools and machine bits and parts,using wrenches,pry bars, and other hand tools, and lubricate machines, using grease guns. Press buttons to activate conveyor belts, and push or pull chain handles to regulate conveyor movement so that material can be moved or loaded into shuttle cars or dump trucks. Move planer levers to control and adjust the movement of equipment the speed height and depth of cuts,and to rotate swivel-cutting booms. Cut slots along working faces of coal in order to facilitate blasting. Moving levers to start the machine and to control the vertical reciprocating drills. Drive mobile or track mounted cutting machines in mines and on construction sites. Ensure proper mining equipment maintenance and use. Perform a full range of task and operate a variety of equipment in underground mines. Experience includes extensive hands on mining experience that allows for comprehensive knowledge of mining methods, equipment, and health and safety hazards. Knowledge of transportation of worker, ventilation in close spaces,ground control, roof control,work site environmental conditions that effect the health of workers, and or accident prevention.

JOB RELATED TRAINING

9 plus years mining experience

3plus years underground

Foreman experience Aviation

Warrant Officer Basic-Part B,

2009 Initial Entry Rotary Wing

AH-64D Track, 2008 Initial

Entry Rotary Wing AVR, 2007

Aviation Warrant Officer Basic –Part A, 2007

Dunker Course, 2007

Warrant Officer Candidate, 2006

Supervisor Development Course, 2006

Manager Development, 2006

Action Officer Development, 2006

Introduction to Defense Reutilization/ Marketing System, 2006 Readiness LevelProgression Training, 2005

Basic Mission Qualification Training Course, 2004

Special Operations Enlisted Qualification Course, 2004 Survival, Escape,Resistance and Evasion (SERE) School, 2004 UH-60 Helicopter Repairer Course, 2003

Certified Underground Miner,Commonwealth of Kentucky, Department of Mines

and Minerals, 1999

Coal Mine Inspector Training, West Virginia 2010

Certified Underground Mine Foreman Commonwealth, KY Certified Underground Electrical. Commonwealth Ky. MSHAProfessionalism Course

MSHAPrevent Fatalities Course

MSHAPreventing Catastrophic Accidents Course

MSHALaw and Regulation Course

MSHACitation and Order Writing Course

MSHAMiscellaneous Health Standards Course

MSHACourtroom Procedures Course

MSHAPart 45,48,50,75,and 77 Courses

MSHAShaft Sinking Course

MSHAElectrical Course

2Yrs. Fletcher Roof Drills

2 Yrs. Joy 14-09 & 14-10 Continuous

Mining machines 5 Yrs. 488 Eimco and

S&Sscoops

2 Yrs A.L. Lee Lo-Tracs

AWARDS:

Army Commendation Medal (2)

National Defense Service Medal (1)

Army Service Ribbon (1)

Iraqi Campaign Medal ( 1)

Global War on Terrorism Expeditionary Medal (1)

Global War on Terrorism Service Medal (1)

Contact this candidate