YOAN.M.PADILLA

**** ***** ***** ** *****

Phone: 727-***-****)

E-mail: ad3q6k@r.postjobfree.com

OBJECTIVE: To obtain a challenging position in Quality Control and / or Nondestructive Testing where my skills, education, and talents will be utilized and challenged with the opportunity for advancement. A hard worker and willing to do what it takes to get the job done safely and by all Customer's explicit testing requirements and complex needs of any given part or equipment to be inspected., In accordance to all applicable procedures and reference standard codes, Thereby assuring complete inspection integrity and most important, 100%Customer satisfaction. Always willing to travel in /out USA, Short/Long term, Off/On Shore

CERTIFICATIONS:

NDT Level II PT, MT, VT, UTT, QC Third party Inspector

TWIC card

OQ certifications

12 basic Plus Safety council card

Backfilling

Installation of Steel Pipe

Conduct Pressure Test

KNT 192-1411 Inspection

Installation of Steel Pipe –Repair of Imperfections or Damage

KNT 192-2403 Nondestructive Testing of Welds

Coating Maintenance

KNT 192-2402 Visual Inspection of Welds

KNT 192-2401 Welding

Application and Repair of External Coatings

Inspect Internal Pipe Surfaces

WORK EXPERIENCE:

Door Dash, Dic 2021 to 2023

Food delivery.

.

ES.I-Engineering Barcelona, Spain Sup. rd Wilson Se-villa Nov 2019 to Dic 2021 Provided Services as a visual 3 party inspector, representing various companies for purchases of materials and equipment, conducting inspections and also witnessing various methods of destructive and nondestructive testings’ all performed following the European standards and codes to ensure quality and the approval of the purchaser. All equipment fabricated and material were Tested,

The Inspections were performed on many different locations including vendors workshops, work fields, cargo ships ect…. All testings’ according to Stage wise and final inspections carried out as per requirement of the ITP/ Drawings provided, with Material Specifications/ Project Specification. Item documentations were reviewed and Released for Packing including Preparation for Shipment. Office location Barcelona Spain.

ITI Inspection-Houston TX rd Sup. Wilson Steve Sharpp Aug-2018 To Oct 2019

Inspector – VT Performed as 3 party Vendor Surveillance inspector for Gray Oak pipeline

Visual inspections and surveillance of the NDE department and ID as well as OD Welding Stations For proper equipment Set up under the welding guideline and recommendation of the CWI Inspector. On the NDE department Full Body UT inspection, Automatic UT weld inspection, Angle beam Prove-up manual UT, X-Ray as well as digital film interpretation and Hydro testing were supervised and witnessed. All these inspections were performed under, API-5L, and Canadian standards from CSA Group. All fabrication and inspections of this project took place at the Bergs Pipe fabrication facility in Panama City

Florida

MTB Quality - Bay town, TX rd Supervisor: Sherri Brooks Apr 2018 to Aug 2018 QC Inspector – VT Performed as 3 party Vendor Surveillance inspector for Targa Resources Visual inspections and surveillance overhaul NDE department.

On the NDE department Full Body UT inspection, Automatic UT weld inspection, Angle beam Prove-up manual UT, X-Ray as well as digital film interpretation and Hydro testing were supervised and witnessed. All these inspections were performed under, API-5L, and Targa guidelines and references. All fabrication and inspections of this project took place at the Bergs Pipe fabrication facility in Panama City Florida

QUALINSPECT INC- Houston. TX Coordinator H.C,S T afford Jan 2015 to Mar 2018

Provided as a third party surveillance inspector. And expediter Inspection visits consisted on witness

Hydro- testing, PMI, Dimension verification and Document review such as Inspection Test Plan, Engineering drawings, Material tests reports, welding and NDE, reports, Marking and shipping according to specifications as well as customer agreements on purchase order. Generate the inspection reports as required by clients and submission of them in a timely manner.

MTB Quality - Bay town, TX rd Supervisor: Rusty Sikes Apr 2014 to Jan 2015

QC Inspector – VT Performed as 3 party Vendor Surveillance inspector for Energy Transfer Visual inspections and surveillance overhaul NDE department and Final Bench coating. On the NDE department Coil UT inspection, Automatic UT weld inspection, Angle beam Prove-up manual UT, and X-Ray as well as digital film interpretation and Hydro testing. On the Coating department Inspection was performed during the Final step of coating before the loading and transportation. Witnessed holiday testing method as well the repair of coating defects including two parts ect, Also to include the surveillance of lab testing procedures of the FBE adhesion test Bend test ect . All this inspections were performed under, API-5L, AWS and NACE, SSPC guidelines and references. All fabrication and inspections of this project took place at Berg Spiral Pipe in Mobile, AL

.

HIT PROMOTION. Largo Florida Sup. Niurka Moreno Jan 2014 to Mar 2014

Work as Quality Inspector in manufacturing departments. Inspections were conducted on various types of merchandise before be distributed in different sectors of national marketing stores, such as Walmart’s, Walgreens, Publix Supermarkets and many others ect . The Inspections of these products were performed under the standards requirements from the manufactures. As well to exceed the quality requirements set by the distribution companies and the packing Department. All these inspections were orient it under the instructions of the department heads Hit Production Quality.

PROENERGY SERVICES- Sedalia, MO. Sup. S. Yates Jan 2010 to De 2013

Provided services QC inspector. Performed inspections on various types of equipment, such as piping, boiler tubes, tubes seating etc.…Also inspection and NDE examination was performed on all turbine components as well as concrete foundation Construction and examinations were performed in accordance with guidelines and specifications, AWS,API,NACE, and Venezuela civil specs.

During the massive construction of a Power Plant facility (Termozulia, Project located in Maracaibo, Venezuela

TEAM INDUSTRIAL SVCS PA. Sup. .J. Shultz Sept 2009 to Dec 2009 Level II NDT Inspector UTT, PT, MT, VT Performed examinations on piping and out side shells for heat exchangers following also other types of equipment such as Pressure Vessels storage tanks ect.All inspections were performed under CWI and API-510,570 guidelines. During the Turnaround on the SRU VRU and Alky units During the Turnaround at Sunoco oil Philadelphia, PA.

TEAM INDUSTRIAL SVCS. S.Roxana, IL. Sup. J.Bowers Feb 2009 to May 2009 Level II NDT

Inspector UT, PT, MT, VT Performed examinations on piping and various types of equipment such as Pressure Vessels storage tanks and Piping .All inspections were performed under CWI and API-510,570 guidelines. During the Turnaround on the SRU VRU and Alky units During the Turnaround at Conoco Philips Wood river, IL.

QUALITY INSPECTION SERVICES- Jacksonville, FL. Sup. T. Hedges Aug 2007 to Dec 2009 Level II Technician - UTT, PT, MT, VT performed inspections on turbines blades, boiler tubes,tubes seating’s where power turbines are to be placed and install,outside shells,fans blades ect all this inspections where performed during different shut downs events on different locations in Florida and north Carolina including Progress energy Power plant and Turkey Point nuclear power plant in Homestead Miami Dade Florida.

MECHANICAL INTEGRITY, San Juan, PR. Supr. H. Lozada Jan 2006 to July 2007

Level II Technician - UTT, PT, MT, and VT Maintenance including API-570 inspection performing on stream inspection all over the plant, sketching and reading P&ID’s. Inspections performed on site at Shell Oil Refinery including turnarounds at the FCC, 5 Crude, 4 Crude and various other units. All inspections were performed under API-570, 653,510 and CWI guidelines.

ENTEC CONSULTANS, - Perry, GA Sup. J. Bernstein Jul 2003 to Nov 2005

II Technician - UTT, PT, MT, VT. Visual inspections, Surveillance, and weld quality inspection performed on Boiler tubes, Digester and piping, all inspections were performed under codes and guidelines of AWS D1.1 during the Turnaround at Weyerhaeuser (peppermill).

JACOBS ENGINEERING USVI - Supr . T. Andrewpont - Nov 2000 to May 2003 Level II Technician - UTT, PT, MT, and VT Maintenance including API-570 inspection performing on stream inspection all over the plant, sketching and reading P&ID’s. Inspections performed on site at Hovensa Oil Refinery including turnarounds at the FCC, 5 Crude, 4 Crude and various other units. All

inspections were performed under API-570, 653,510 and CWI guidelines

PROTEO - Santa Fe, Argentina Sup. O. Della feliche Jan 1999 to Oct 2000 Level

I Technician - MT, RT inspections performed on various types of equipment’s, on T/A methods like UT

thickness on different pressures lines and different fluid lines (gas-liquid) based on specific point on blue prints or inspector criteria. On Boilers UT thickness water walls was performed, serpentines, economizers and decks. Domes internal inspections was required, VT on shells, head and wells, MT on wells circumferential and longitudinal, endoscopies in out coming pipes locking for sedimentation, UT on shells and head, replica metallographic on domes head, high pressure vales, steam high pressure valves and

wavering pipes, even in 6". High pressure and temperature hydrogen pipes on conversers. MT all away around in wells in sphere (catalyst) on different sizes.

EDUCATION July 2007- Energy U OQ June 2000 – Proteo: Visual Testing II (VT)Nov 2000 - JPA: Ultrasonic II (UTTNov. 2000 – JPA:

Visual Testing II (VT)December 2000 - JPA: Magnetic Particle II (MT) September -1999 - Cedec: Penetrant Testing II PT September -1998 - Cedec: Ultrasonic II (UT)June 1998 - Cedec: Radiation Technique I (RT) SAFETY TRAINING South Jersey Chemical Manufactures

Safety Council OSHA 10.PASA Chemical Plant. Acindar Steel Safety Training. Conoco Phillips Safety Training

EDUCATION. July 1995- Isidoro Bermudes Bachelor’s degree - Since and Letters City and Country Matanzas Cuba

EQUIPMENT:Able to work with Ultrasonic A and B Scan presentations PANAMETERICS 26DL and 36 and 37DL plus.

COMPUTER & SOFTWARE:

Windows Vista, XP, Office, word, excel, power point, QuickBooks, Parametric 36 DL plus and 26 DL plus

PERSONNAL EQUIPMENT:

Portable computer, digital camera, Measurement devices and precision gages, flashlight etc.

Contact this candidate