Jeromy W Bastrisky

Summary

Over ** years in the construction, commercial and residential; refineries, minerals, mines, steam power generator, natural gas, smelters, boilers and cogens, geothermal, coal dryer, biofuel, pipelines, fabrication shop and tank battery storage. Through the years of supervision, I have directed and worked with the safety department to help educate the coworkers,

“safety starts with them first”, “their rights to stop work if unsafe”, recognize potential hazards, buddy systems and worker participation with safety.

Oversight of the project in the field with a focus on quality, compliance with engineering drawings, applicable code and standards, and construction schedule and cost. All activities and responsibilities include consideration of; safety, personnel management, labor relations, public relations, government relations (governmental regulatory permits including personal contact with designated officials), legal and regulatory compliance.

Obtains subject matter expert knowledge with the scope of work, project requirements, establishing welding procedures, construction drawings and contract documents. Review the project scope with the inspectors and survey party chief to determine which inspectors are qualified for the various phases of construction.

Provides advance planning and organization of inspection duties, survey duties, utilization of Company furnished materials, construction activities, and tie-in activities.

Inspects the activities of the Contractor and judges work to be in compliance to construction drawings and contract documents. Takes appropriate action if out-of-specification work is identified. Action may include stoppage of work.

Verifies all proposed design changes or material substitution changes and obtains proper approval prior to work commencing.

Secures proper documentation before the contractor performs any work off the right-of-way, and working with the right-of-way agent to resolve any landowner problems.

Verifies through the right-of-way agent and or the appropriate office that all permits and agreements necessary to perform the project have been acquired, and that any special requirements associated with these permits and or agreements are performed.

Establishes and maintains communication with appropriate with state and local agencies associated or impacted by the project as well as local company supervision. Communication plans will include the scheduling of personnel to be present when excavating existing pipelines; pre-job meetings; scheduling "tailgate" meetings for hot tie-ins; and verifying that the pipeline is coated and back filled before being placed in-service.

Perform a material "take-off” to assure that materials are available to complete the project.

Verifies the certifications of the contractor's hydro static test and welder testing instruments and equipment.

Verify that approval has been obtained for any proposed subcontractors prior to their initiation of work.

Verifies that the radiographer's certification is complete and correct, that acceptable radio-graphic procedures are established, that the technicians(s) has a copy of the Company specification and current API-1104 edition, and that the technician is familiar with Company procedures for film identification, form completion, documentation for the disposition of rejects, etc.

Assures the qualified radio-graphic procedure is utilized, quality of radio-graphs is acceptable, and proper documentation is maintained by the radio-graphic crew(s), including the disposition of each rejected weld and repair of same.

Computer skills:

Micosoft; Word, Excel, sharepoint, adobe, project management software, procore, foundation and blue stream Education:

Crosby-Ironton High School 87, Crosby-Ironton Mn

Brainerd Vocational ASE Certification 89, Brainerd Mn Professional Experience:

Epcon Industries, Greeley CO March 2023 –

December 2023

Project Manager

Over-see 6-6man crew installing test stations for P66 in Greeley Colorado

Schedules and any suggested revisions to be reviewed.

Implement and maintain Environmental and Safety procedures.

Direct ROW and permits

Report directly to P66

Establish project task lists to keep projects moving forward according to each project’s plan.

Document control, job data books

February 2023-

March 2023

Xiphos Inspection, Kersey CO

All Inspector

12 miles 8.625” pipeline for Cureton

Material inventory and document control

Welding inspection and weld map

Excavation and backfilling

HDD bore inspection and document control

Hydrostatic testing and document control

Nace document control

Bolt up witnessing

ROW and restoration

Nyrstar Inc, Clarksville TN Jun 2022 – Dec 2022

Construction Project Engineer

Over-see “waste boiler heater project” and other changes necessary to improve production efficiency, quality and operational safety.

Lead in research, information gathering, obtaining quotes from vendors and supporting the development of both short- and long-term. Report the status of a project to the stakeholders.

Schedules and any suggested revisions to be reviewed.

Lead project review meetings during the course the project.

Establish project task lists to keep projects moving forward according each project’s plan.

Conduct Risk Assessments to identify and deal with any risks that may exist with the project.

Project deployment and a successful start-up with continuous support, deploy inside project financials, achieve project timelines, complete quality targets in the project scope.

Design of system improvements, including conceptual drawing capabilities along with review and finalization.

Implement and maintain Environmental and Safety procedures.

Lead cross-functional project teams of Engineers, Suppliers and Production Leaders. Premier Earthwork and infrastructure, Ft Lupton CO November 2020 - Apr 2022

Construction Safety Manager/PM

Overseeing 20 million in capital construction(s) each year. Scope includes budgeting, purchasing, quality control, scheduling of trades and other vendors, health and safety, contract labor oversight, compliance (both legal and regulatory), and job progress documentation.

I would also bid, purchase material(s), oversee onsite labor, schedule equipment, retaining and overseeing subcontractors and schedule inspections.

Projects includes large housing developments, bridges, landfills, 20 miles of new asphalt roads, concrete, and asphalt in various facilities.

Tallgrass Energy, Sterling CO Oct 2015 - Sept 2020 Sr Construction Coordinator/PM (Overseeing)

20 million in capital and operation construction each year.

Generating budgetary construction forecast, AFE, populating management of change (MOC), EHS permitting, Right of Way, scope of work for bidding project, estimating, awarding projects, Purchase of requisition for material and services, overseeing construction weekly scheduling, completion of project, shipping and receiving, OQ verification, project inspection per company procedure and standards, welding inspection, certifying welders, PSSR and job data book.

Participated with compliance and standard community, Right of Way and environmental regulation, welding integrity and Environmental hazard, red line drawings and safety and hazwoper departments. Criteria included gas, oil and NGL for pump station, compressor station, pipeline, meter run, tank batteries, master border station, liquid gatherings system, and laterals. Anomalies, tank and pipeline inspection.

Assist supervisors with budgeting and budget forecasting in operation. 51 OQ`s as an active SME /evaluator. Regulation training for DOT, PSSM, FERC 192, FERC 195. Merit Energy, Liberal, KS May 2014 - Oct 2015

Lead Construction Representative via Energy Inspection Services

Construction manager for Merit Energy out of Liberal KS, covering SW of Kansas.

Oversee contractor’s build new and update old tank batteries per API 500.

Scheduling, material purchasing and receiving, cost tracking, construction, build/design, quality control and start up with commissioning.

Oxy Energy, Liberal, Ks Jun 2012 - May 2014

Construction Inspector via Roadrunner Inspection Service

API 500 storage batteries, 5-10 billion in capital construction budget.

Oversee the contractor`s installation for Oxy`s tank battery and wellhead and responsible for contractors to adhere to safety guidelines and standards, following safety rules and regulations to promote a positive safety culture.

Responsible for adhering to environmental standards and for environmental awareness.

Responsible for cost control of projects reporting daily and weekly meeting.

Expected to make responsible decisions in the field for the required work to be accomplished safely and productively. Ensure no leaks, spills or releases. Reynolds Industrial Construction, Minden LA Jun 2011 - Jun2012 Quality Control / Safety Manager

Boiler systems, refineries, gas plants and compressor stations Quality management over seeing fabrication for structural and pipe related to DOT, B31, 1104, ASME VIII and API procedures.

Monitoring and updating Reynolds WPS and WQP for pipe and structural welders. Completing U, R and S stamp on new and existing vessels.

Verify fabrication follows procedures and specification, NDE/XRAY, hydro and pneumatic testing and provide documentation per clients requirements.

Monitor safety with shop and field, placement of safety documents and training for workers and Supervision hands in safer environment awareness.

Tulsa Inspection Resources, Ringgold LA Jan 2010 - Jun 2011 Construction Inspector

Amine and Glycol facility

Directed 35-50 hands in construction installation on a natural gas Dehy and Tegg filtration (B31.3), daily monitor and document visual testing and complete all redline from contractors.

Assist in startup and commissioning facility and led safety meetings with contractors.

Audit contractors with construction and safety documents for turn over packages to client (QEP). Ardent Services Mar 2009 - Jan 2010

CO and WY I/E and Quality Control Superintendent

Pilot stations, Coal mine, Refineries

Overseen the rocky mountain construction division with quality and safety documents turn over to clients (BP, Sinclair, Exxon, Shell, and Enterprise), updated and instructed supervision on revision and new codes.

Visit sites monthly for audits and meetings with supervisors and workers on construction, testing and safety awareness.

Jacobs Engineering Jul 2007 - Mar 2009

Quality Assurance Team

Refineries, Mines, Gathering facility, Cogens, and heavy industries

Assist engineering with procedures and specifications per clients, completed inspection test packages for QC on site and performed vendor surveillance.

Hire and direct QC for construction site, wrote procedures, categorized critical list, monitored equipment list and delivery dates, up dated redline from construction and revision from engineers, audit transmittals, monitored progress reports and bi-weekly schedules to Project Managers. Moody International Mar 2005 - Jul 2007

Construction Manager / Inspector

Pilot station

Assist engineering with a bio diesel fuel facility, direct 45-60 hands and led safety meetings.

Directed construction installation with contractors, reported to engineering with installation and witness testing.

Weekly meetings with contractor and engineers with production and revision/redlines, reported to Project Managers weekly with schedules and safety activities.

Directed safety walk downs with contractors, directed 3rd party safety instructors for worker education and monitored safety incidents cause and effect.

Pearl Group Engineering Apr 2004 - Mar 2005

Dickenson ND Quality Control / Superintendent

API500 storage batteries

Assist office engineering from construction site at Marathon refinery, directed 10-25 workers with safety and report to Project Manager.

Direct automation operation with operators, instructing operators with function and commissioning.

Updating schedules with contractors work performance in congested work areas, documenting daily activities and turning over systems.

Fagen Inc. Brooking SD Aug 2002 - Apr2004

Quality Control and Commissioning I/E

125 mega turbine steam generator, 100 billion methanol facility Directed up to 125 supervision and workers, turnkey construction on Steam Power Generators produced from F16 engines and Million gallon Ethanol facilities.

Oversee weekly meetings and budgets with internal crafts with production and safety incidents, monitored weekly progress and vendor equipment delivery schedules.

Assisted engineering with updates for construction revision, redline audits and document control distribution.

Generated system priorities and turn over packages for startup, directed commissioning crew and weekly progress reports.

The Industrial Company, CO WY SC CA NM OK 1990 – 2002 I/E Superintendent

Mines, Cogen, Reefers, Smelter facility

Certifications:

Colorado Electrical license

CCWI

MSHA 40, OSHA

API 500

OQ`s 51 Specific training and qualification

Mechanical

ASME sec VIII (U, R, S stamp), 1104, B31.1, B31.3, D1.1

Stress relief and bake out Quality Assurance and Quality Control

Corrosion protection

Pipe integrity

NDT Weld and heat mapping

Vendor surveillance

Document control Safety Electrical and Instrumentation

NEC

Instrumentation calibration

SCADA, PLC and DCS

Heat trace

Power distribution

Civil Air, slump and additives

Contact this candidate