BOLESLAW (Bolek) BOCZKAJ

PO Box *****

Irvine, CA 92623

Cell 949-***-****

SUMMARY OF QUALIFICATIONS

Resourceful engineering professional with extensive experience in project execution, design, and programming. Enthusiastic innovator with excellent leadership qualities and a proven track record of creating and implementing results-oriented solutions. Problem solving team player, who is an individual contributor with ability to see the big picture and be detail oriented at the same time. EXPERTISE

ACTVITIES: control system design, controller programming, operator interface design and configuration, selection of equipment (sensor, controllers, actuators), project management/engineering (scope of work, schedule, estimate, resource utilization, change management, minutes of meetings) from start to finish and partial with handovers, project execution plans (deliverables, milestones, budget, and staffing plans), panel design, acceptance tests, commissioning and startup, as builds, site walkdowns, documentation, specifications (construction and equipment).

INDUSTRIES: power, steel, chemical, water and wastewater treatment, oil and gas, energy monitoring, food and beverage, energy conservation, semiconductors, robotics, and paper. TYPES OF EMPLOYMENT SETTINGS: Engineering Procurement Construction (EPC) and consulting engineering firms, operating companies, original equipment manufacturers (OEM), systems integrators, and contractors.

KEYWORDS: 460 V AC power distribution, 132/64/13.8/4.16kV/460V, switchgear, MCC, factory automation, AFD/VFD, instrumentation and process control, machine and AC/DC motor control, control panels, operator interface/HMI, PLC, I/O, H/W, S/W, IEC 61131, structured programming, FAT, SIT, SAT. BRANDS: Allen-Bradley, Siemens, Modicon, Omron, GE, Fuji, Control Microsystems, Acromag, Red Lion, Intellution, National Instruments, Panelview, Total Control, Westinghouse WDPF, Reliance, Schneider/Square D, Schweitzer Engineering Laboratories, Electro Industries/Gauge Tech, Basler, Banner, Cooper/Crouse-Hinds, Obvius Modhopper, Digi, Veris, Anton-Paar, Drexelbrook, Rosemount, Foxboro, Micro-motion, Pyramation, Vapex, HART, Ethernet, Data Highway+, DeviceNet, Modbus, Profibus, ControlNet.

COMMERCIAL SOFTWARE PACKAGES: MS Word, Excel, Visio, Outlook, Microstation ProjectWise, Salesforce, Basecamp.

EXPERIENCE

POWER-TECH ENGINEERS, Inc. (project) Walnut, CA

Senior Control Engineer 2015-present

As Owner’s Engineer, oversaw design and construction effort of an controls [PLC, Ethernet and fiber optic network], power conversion [LCI – Load Commuted Inverter], and protective relays upgrade project of a pump/generation hydroelectric power plant.

Reviewed and approved project drawings, Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) procedures, bid package, Operation & Maintenance (O&M) Manual (incl. functional description), and related documentation.

Eye-witnessed on behalf of owner FAT and SAT. Wrote and submitted project review and FAT reports as well as other applicable documentation.

Analyzed C language optimization routines.

Wrote meeting minutes and notes.

Conducted site walk-downs, wrote field reports.

Gathered information, both field and drawing searches, during site visits and created As Builds documentation.

Co-edited two facilities’ Arc Flash report.

Checked data entry of electric characteristics of equipment in ETAP brand softwere for arc flash study.

Assisted executive level personnel in meetings with potential business partners. AMERESCO INTELLIGENT SERVICES [was EPS] (contract) Costa Mesa, CA Controls Engineer 2011-2013

Designed wired and wireless, line and solar photovoltaic powered, PLC-based networked data acquisition control systems for energy monitoring of manufacturing facilities.

Developed project drawings such as Panel Layouts and Bills of Materials, Schematic (or Wiring) Diagrams, Plans, Installation Details, and related documentation.

Developed construction and equipment specifications and data sheets. KDC SYSTEMS, Inc. (contract) at Orange County Sanitation District Huntington Beach, CA PLC Test Specialist 2010

Performed Operational Readiness Tests (ORT) of field devices function and connection to PLC’s and developed configuration procedures at municipal waste water treatment plant construction site. FLUOR ENTERPRISES (contract) Aliso Viejo, CA

Control Systems Engineer 2007-2009

Programmed PLC’s and developed PLC-DCS subsystem interfaces and specification used in chemical industry's solar grade silicon manufacturing facilities.

Corrected and modified documentation such as Data Sheets, Process & Instrumentation Diagrams

(P&ID), Cause & Effect (C&E) Diagrams, Control Narratives (CN), and other system operation descriptions.

Reviewed, corrected, and approved vendor documentation submittals.

Developed client side FAT and Site Integration Test (SIT) procedures and forms, eye witnessed and recorded results of these tests.

Developed project specific and generic equipment specifications. BOLESLAW BOCZKAJ (consultant) for RFB Consulting at IRWD Michaelson plant Irvine, CA Consultant 2005-2007

Estimated and implemented as build documentation for municipal waste water treatment plant. PACIFIC ADVANCED CIVIL ENGINEERING, Inc. (project) Fountain Valley, CA Electrical/Controls Engineer 2004

Designed and programmed SCADA RTU/PLC-based control systems for water treatment facilities. CBM, Inc. (project) Santa Ana, CA

Senior Staff Engineer, Controls 2003

Programmed DeviceNet PLC control systems with operator interface used in medical devices manufacturing machines.

JCA ELECTRON COMPANY (project) Anaheim, CA

Control Systems Engineer 2002

Programmed PLC control systems for manufacturing facilities.

Developed Loop Diagrams.

MANUFACTURING AUTOMATION SOLUTIONS, Inc. (project) Mission Viejo, CA Project Electrical Engineer 2001

Designed SCADA PLC-based control systems for water and wastewater treatment facilities.

Developed supplier side FAT procedures and forms. GE AUTOMATION SERVICES, Inc. (contract) Phoenix, AZ PLC Programmer 2000-2001

Programmed PLCs used in a major semiconductor manufacturer’s fab.

Corrected and updated support documentation such as P&IDs and Sequences of Operations (SoO). PROCESS ANALYSTS, Inc. (internal contract) Van Nuys, CA Controls Engineer 1997-1998

Programmed networked PLCs and an operator interface used in a brewery. VERTEQ, Inc. (contract) Santa Ana, CA

PLC Programmer 1996

Programmed PLCs and an operator interface used in an automatic semiconductor wafer cleaning wet bench machine.

VARCO DRILLING SYSTEMS (contract) Orange, CA

Software Engineer 1993-1996

Programmed PLCs used in a teleoperated robotic oil drilling equipment in oil and gas industry.

Updated and modified Control Philosophy documentation (C&E, SoO, description of features). JOHN CAROLLO ENGINEERS (project) Santa Ana, CA

Electrical Engineer 1992

Designed electrical systems for waste water treatment plants [standby power, MCC].

Wrote equipment and installation specifications, reviewed and evaluated bids.

Developed Process & Instrumentation, Single Line, and Schematic (or Elementary) Diagrams.

Prepared engineering and construction estimates. BOLESLAW BOCZKAJ (consultant) at AEG AUTOMATION SYSTEMS CORP. Oakdale, PA PLC Programmer 1991-1992

Programmed PLCs used in robotic work cells and conveyors in automotive, aerospace, and electronic industries.

NATIONAL STEEL CORPORATION (contract) Ecorse, MI

Electrical Engineer 1991

Conducted study of a Basic Oxygen Shop as a part of upgrade and consolidation of controls project in a steel mill.

VOEST-ALPINE INDUSTRIES (contract) Pittsburgh, PA

Electrical Engineer 1989-1991

Analyzed and designed electrical and instrumentation systems for continuous caster’s Water Treatment Facility and Compressors [MCC, instrumentation for DCS] in a steel mill.

Interviewed and evaluated candidates for an electrical engineer position.

Supervised one engineer and several designers.

CENTERLINE ENGINEERING CORPORATION Pine Township (Wexford), PA Electrical Engineer 1988-1989

Analyzed and designed electrical and instrumentation systems for pickle mill [X-ray Gauges, DC Drives, PLC] and Cold Rolling mills [DC Drive and Motor, DCS and PLC installations, relay logic, strip guidance, control pulpit extension] in steel mills.

Developed construction and equipment [control panels] specifications.

Conducted personnel performance reviews.

Analyzed departmental and corporate performance.

Prepared, presented, and negotiated Engineering Change Orders with clients.

Compiled O&M Manual for upgraded part of rolling mill. BELCAN CORPORATION Bridgeville, PA

Electrical & Instrumentation Engineer 1984-1986

Analyzed and designed electrical, instrumentation, and process control systems for chemical industry's Extruders and Film/Filament Conditioning Lines [DC Drives, PLC, MCC], Computer Rooms and HVAC systems.

Managed multidisciplinary project efforts as a Job Engineer from the initial to the final stage.

Developed project effort scope of work and estimated engineering and construction cost. INTERNATIONAL PAPER COMPANY Lewisburg, PA

Electrical Engineer 1984

Designed electrical and instrumentation systems in non-woven textile mill. KENTUCKY ELECTRIC STEEL CORPORATION Ashland, KY

Process Control Engineer 1983

Developed preventive maintenance program for a steel mill. UNITED STATES STEEL CORPORATION Pittsburgh, PA area Technical Supervisor 1979-1983

Trained and supervised production and maintenance personnel in steel mills. EDUCATIONAL AND PROFESSIONAL AFFILIATIONS

MS - Georgia Institute of Technology, Atlanta, GA - June 1988 BSEE - University of Rochester, Rochester, NY - May 1979 Eleven publications on application and programming of programmable controllers, operator interfaces, and field device network buses.

Professional Licenses: Professional Engineer, Pennsylvania Citizenship: United States of America

Contact this candidate