**** ***** ****, ********* *****

Madison, Al. ***58

Phone: 225-***-****

Email: ad3m2j@r.postjobfree.com

WILLIAM A. MULLEN

Objective: I hope to find a permanent position in the instrumentation field with a growing organization. I believe that I have the necessary qualities to become an asset to your organization. Computer base training and hands on Instrumentation electrical. Summary: I have 30 years experience in the petro chemical refinery and power distribution facilities. I have vast knowledge of DCS systems. Most of my knowledge of instrumentation and electrical systems came from my experience at Dow Chemical. While there I worked maintenance and project installations. I have completed formal classes on DCS system and some of the latest and most advanced products in the business today. I am familiar with all areas of startup and commissioning of plant system including turbine generator controls, furnaces, boilers, chlorine cells, compressors and other systems and utilities. At Dow I was lead tech in most units that I worked in. I am an excellent organizer and a detailed planner. I have made schedules and organized procedures on startup and loop checks. I am self motivated and believe in making my client happy. I’m willing to dedicate overtime to get a job done. My attitude is very pleasant an easy to get along with, also you may contact any of my references. I was put in a Supervisor roles many times during my 30 years at different locations. Education:

Baker High School, Baker, Louisiana

Graduate (12 years)

International Technical Institute, Baton Rouge, Louisiana Six hundred (600) hours classroom theory and hands on training Electronics 1

Advanced Electronics (Instrumentation Technician)

NRG, New Roads, Louisiana

Penn Foster Electronics Technician Course

Seven hundred & thirty-eight (738) hours of hands on Instrumentation National Center of Construction Education and Research Instrumentation Technician- NCCER

SIS Certified: In all safety Instrumented systems for Dow Chemical TWIC CARD- Expires 2/12/2025

NCCER: CARD # 1018254

NICET Training

Security Passport Card # 215725

IADC Rigpass Card

Page2:

Professional Experience: Contractor Service & Fabrication, Inc. 6/21/2021- Present: Senior Instrument/ Electrical Technician, Decatur, Al. Duties are maintaining and troubleshooting equipment at a Flurorpolymer and chemistry facility. Work orders were preforming schedule preventive maintenance on PH Meters, Analyzers, pressure transmitter, Flow transmitters,DP transmitters, Temperature, valves, solenoids, mostly all smart technology. Working on outages and inputing work orders into the Beamax computer system for data login and signing off work orders as completed. Professional Experience: Excel Group

3/23/2020- 5/28/2020: Senior Instrument Technician, Baton Rouge, LA. Daily duties were to do scheduled work and work on emergency jobs as they happened. Preventive maintenance jobs also were done monthly like PH meter, flow meters level meters, temperature transmitters. The DCS system was the Delta V System, which is a state of the art system even though most of the units still operated off of a pneumatics instruments. I was laid off this job due to the COVID 19 (furloughed)- Reduction of force. Professional Experience: Honeywell Specialty Chemicals 2017- 2019: Senior Instrument Technician & Electrical, Baton Rouge, LA. Twelve hour rotating shift doing instrument and electrical maintenance, PH checks various types of flow, temperature level, pressure, control valves, EBV values, Coriolis flow meters, Vortex flows all smart instrumentation, PLC control, Solenoid valves, flame scanners on boilers. Vega level transmitter & sonar levels. Coordinator daily schedules and work orders to be done weekly. Even though we had to work a two man shift we had no supervisors at night. We were left to make the decision on each jobs and work closely with operations. At the end of each night shift we made report on each job.

Professional: Experience:

2014- 2016: Instrument Technologist at Dow Chemical, Plaquemine, Louisiana. Daily functions working on a 4/10 shift, Sis equipment thorough checks on all various types of flow, temperature, level, pressure, control valves, EBV values, Coriolis flow meters, Vortex flows all smart instrumentations. We work on turbine controls. Boilers controls, burner management, PLC control, Solenoid valves, flame scanners on boilers. Vega level transmitter set in distilling wells and also sonar levels, all done with laptop setting and calibration and configuration through software. Keeping up with schedule compliance fill in data history for each job and order necessary parts on jobs coming on our planned jobs. Close out jobs after completion and stayed safe. I also worked on turbines. Thru out of my career I dealt with vendors and order parts and materials as needed on a daily bases. I also, planned and scheduled jobs took care of priority and emergency jobs and category 1-2-3 jobs. During this time I was lead technician, we had 3-4 outage each year I was responsible for all new contract hands that worked with us during the outages. My duties were to make sure all equipment was there to do their jobs. I assigned each job to each person, & I also mentor these technicians as needed.I kept up with all schedule compliance at daily meetings, made reports for production holdups and anything that was keeping a job from progressing. Daily reports on job performance and had to take disciplinary action against those who were not preforming their duties. I was responsible for ordering all materials for the outage and talking to vendors.

Page 3:

Professional: Experience:

2007-2013: Electronics Technician II- NRG (Big Cajun II), New Roads, Louisiana Daily functions are shift maintenance, working closely with operations. Troubleshooting and repairing electrical gear, analyzers and instrumentation. Start stop gear, switchgear, starters, power supplies, and UPS systems. Plant startup was often along with function testing on all equipment, burner management and mill logic programs built into PLC logic. PH, conductivity checks. Smart instrumentation, hands on with high voltage 480,6.9 gear, control valves, solenoid operated valves. Flow, pressure, level, temperature, devices of all kinds. Foxboro DCS controls.

Professional: Experience:

2006-2007: Instrument and Electrical Technician- Solvay, Inc. Baton Rouge, Louisiana

I perform maintenance in a sulfuric acid and storage facility. Here I do weekly ph checks, repairs as needed on various instrumentation. Micro motion flow meters, Vortex flow meters, mag flows. I also, work with various level devices, bubble tube levels, radar levels. Mostly all Rosemont Smart family, repair on analyzers with these analyzers were monitor S02, CO and 02 and stack S02. I also, do electrical maintenance on lighting, 110 VAC services, 480 VAC services, also DC circuits, relays and starters, switches and switchgear, start-stop, and on-off circuitry.

Professional: Experience:

2001-2006: Maintenance Technologist Westgate, Inc. Dow Chemical Plaquemine, Louisiana

I worked at the ethylene, benzene facility my duties were daily maintenance on various instrumentation, flow, temperature, level, control valves, EBV’S solenoids. All smart instrumentation Rosemount, Honeywell, Yokogawa. Commission loops worked routine turnarounds and I was lead technician in this unit. When volume of work load pickup and I was ask to manage the extra employees and help manager their reports and giving reports on their productivity and mentor them where there needed it. Professional: Experience:

2001: Instrumentation and Electrical Consultant: Cajun Connection Inc, IBM Micro chip facility, Fishkill, New York

I acted as a consultant/supervisor over union employees in a water treatment facility, and made sure the job was done correctly and within specs. Major equipment included a Modicon and a Triconex logic systems, all Rosemount smart instrumentation. Motor control centers, limit torque motor valves. Startup was completed and head of schedule. I had to make sure all instrumentation was being done according to specs, and to make all the instrumentation loops were sold off and signed off by IBM.

Page 4:

Professional: Experience:

1995-2001: Maintenance Project Manger Westgate, Inc. Dow Chemical, Plaquemine, Louisiana

I was over a conversion going from an older DCS system to a new MOD V DCS System. I supervised a team of Instrument and Electrical technicians. Conversion was to go thru and eliminate the old system and wiring and install the newer system this was in a power plant unit. We completed the job ahead of schedule. I had to over see the teams paper work and procedures and make sure their JSA were completed each day. Worked closely with operations made sure the jobs were ready and tagged out and prepped - ready to work on. Did weekly meetings with upper management on job progression and budget and timing and deadlines to be met. The job was completed and well under budget. I was responsible for keeping up with cost and ordering materials and keeping a list of add ons to the budget and gave reports on any set backs or lay overs from operations or any other set backs. Professional: Experience:

1994-1995: Project Technician Triad Electric and Controls, Exxon Baton Rouge, Louisiana.

I worked both petro chemical and refinery facilities at these sites I performed startup functions and wrote loop check procedure. Some of the major equipment I performed test on was the TDC 3000 system, Modicon, Pratt and Whitney Ft8 50 mega watt turbine generator. Installation of Rosemount micro motion meter, Rosemount pressure transmitters and other various instruments. Startup was a success and on time. Professional: Experience:

1992-1994: Maintenance Technician Westgate, Inc. Dow Chemical, Plaquemine, Louisiana

I worked at a chlorine facility here my duties were daily maintenance on various instruments, also I did startup and commissioning, wrote procedures on startups. Some of the equipment included Lufkin compressors. Westinghouse combined cycle 50 mega watt turbine, chlorine cells, reactors, all smart instrumentation. Rosemount and Honeywell, Foxboro, MOD V, DCS system, Modicon, fisher control valves, EBV’S Bentley Nevada 3300 systems, solenoid valves, Beckman Ph monitoring and other Ph controls, chlorine monitors, that worked with a Ingold chlorine monitoring system. All startup were completed on time or ahead of schedule. Page 5:

Professional: Experience:

1990-1992: Maintenance Technician Barbay Engineers, Dow Chemical, Plaquemine, Louisiana

I worked at a caustic facility, here I did day maintenance. I performed functional testing, startup and commissioning during outages. Weekly ph meter and ph analyzer checks. Also performed procedures for loop checking instruments. Some major equipment included TDC 2000, Spec 200 DCS systems, Lufkin compressors which I performed test on vibration system and startup permissive. I usually maintained this unit by myself expect during outages. Startup went smooth.

Professional: Experience:

1989-1990: Maintenance Technician Radon Inc. C&F Industries, Donaldsonville, Louisiana

I worked as a trainee, assisted senior technicians on a day to day maintenance. Here we troubleshot MCC buckets and installed relay contacts that went to various pump stations throughout facility also we did startup and commissioning on the TDC 2000 system and the Westinghouse gas turbine simple cycle 50 mega watts. Here I paid attention and learned everything I could.

Professional: Experience:

1988-1989: Lane Hart Inc. Baton Rouge, Louisiana

Construction, Acoustics, drywall, remodeling

Professional: Experience:

1984-1988: Custom Coating, Baton Rouge, Louisiana

Construction, Acoustics, drywall, remodeling.

During my 30 years at my craft I attended many courses, all are not listed. Training: Rosemount

Instrumentation transmitters

Modicon DCS system

Operation and termination class/programming class

Rosemount

Micro Motion Flow Meter, Model 8512c class

Fisher Control Valves

Moore 74g valve positioner class

Page: 6

Training: Continue

Mod V DCS System

Operation and termination class

Mechanical Contract Association

Safety training class

Association of Reciprocal Safety

OSHA safety course

Hazwoper Training

Yokogawa

Ph and flow meter class

BBP..VEGA

Ultrasonic, Radar levels

Endress Hauser

Radar levels, Ultrasonic

John H.Carter

Valve and smart Positioner class

Masoneilan

SVI II AP Digital Positioner

Emergency Response Team at NRG/Medic

Alliance safety council 12SSV reciprocal courses 12 basic plus ref.Safety M&A Safety Services

Hazwoper 8 hour operation level

Confined space entry attendant

H2S/Respiratory protection

Fire/fire watch incipient

Fire Aid/CPR/AED/BBP

Lock out tag out

Fall protection user/ Intro to PSM

References available upon request

Contact this candidate