CURRICULUM vITAE

UMESH KUMAR TRIVEDI

House no.**1, Near Ranjandevi Temple,

Sec. 9, At Post-Koperkhairne, Mobile No:-+91-997******* Navi Mumbai, (Maharashtra) 400709 Email:-ad3kjw@r.postjobfree.com CAREER OBJECTIVE:-

I am seeking for a Technical Career in Mechanical Engineering (QA/QC-NDT & Welding) field in a Progressive environment as well as my best Knowledge & Experience in Line pipe, Pipelines (CGD and Cross Country), Piping, Process pipe, Pipes, Tubes, Boilers, Pressure Vessels, Storage Tanks, Heat Exchangers, Ships

(Building & Repair Division) & Steel Structural Fabrication (Heavy Fabrication for Oil, Gas, Hydro Carbon, Petrochemical plant, Power plant, Chemical plant, Process plant, Cement plant, Onshore and as well as Offshore projects). To work with an organization to the repute and strength my inherent Quality, Skill and Experience for the betterment of my future and that of the organization. I am responsible for making Quality to meet our customer requirements and satisfaction. TECHNICAL QUALIFICATION:-

A.S.N.T. Level II in Ultrasonic Testing (UT) from Forum Consulting School of N.D.T. Mumbai.

A.S.N.T. Level II in Radiography Testing (RT) from Forum Consulting School of N.D.T. Mumbai.

A.S.N.T. Level II in Magnetic Particle Testing (MT) Forum Consulting School of N.D.T. Mumbai.

A.S.N.T. Level II in Penetrate Testing (PT) from Forum Consulting School of N.D.T. Mumbai.

A.S.N.T. Level II in Visual Testing (VT) from Forum Consulting School of N.D.T. Mumbai.

Certified Welding Inspector (CWI) Seminar attends From Institute of Testing Technology Mumbai. ACADMIC QUALIFICATION:-

Diploma in Metallurgical Engineering from CMJ University.

Diploma in Mechanical Engineering from National Institute of Engineering.

Senior Secondary School Certificate from Board of Secondary Education (Raj.)

Secondary School Certificate from Board of Secondary Education (Raj.) More then Fifteen Years of Experience in QA/QC-NDT department. 1. Currently working as “Quality Control Engineer” with Nauvata Engineering Pvt. Ltd. at Cairn Oil & Gas -Vedanta Ltd. Barmer, (Rajasthan) from 1st March 2023 to till Date. 2. Two years Seven months worked as “Mechanical Inspection Engineer” with RINA India Pvt. Ltd. at Cairn Oil and Gas, Vedanta Ltd. Barmer, (Rajasthan) from 1st July 2020 to 28th February 2023. 3. Three years Seven months worked “Surveyor–TPI” with International Certification Services (ICS) Pvt. Ltd. Mumbai, (Maharashtra) from 21st May 2014 to 30th July 2019. 4. Four years Five months worked as “Engineer – NDT” with Pratibha Industries Ltd. Wada, Distt. - Thane,

(Maharashtra) from 20th Dec. 2009 to 17 May 2014.

5. Two years Ten month worked as “Inspector (NDT)”with Welspun Corp. Ltd. Versamedi, Distt. - Kutch

(Gujarat) from 17th Feb. 2007 to 17th Dec. 2009.

6. Two years six month worked as “Inspector (NDT)” with PSL Ltd. (QIX Pvt. Ltd.) Versana, Distt. - Kutch,

(Gujarat) from 08th April 2004 to 15th Feb. 2007.

SHUTDOWN ASIGMENT:-

Ten Months worked as “Inspection Engineer” with Reliance Industries Ltd., Nagothane, Maharashtra from 1st August 2019 to 30th June 2020.

Forty Five days worked as “Quality Control Inspector” with Dry Docks World-Dubai (UAE) from 27th September 2012 to 10th October 2012.

COMPANY PROFILE:-

Nauvata Engineering Pvt. Ltd. is the leading Engineering and Management company, providing world class Engineering, Procurement and Construction (PMC) service to all Oil and Gas companies worldwide. We assist the customer to implement their capital projects in Oil & Gas sector as well as in energy transition area such as Bio –Fuels, Carbon Capture, Plastic Circularity, Green Hydrogen and Hydrocarbon. Our core engineering capabilities and ability to provide complete Digitalization solution

(Industry 4.0) has helped us support multiple Oil and Gas Companies, Refineries, Petrochemical pants and Cement plants globally.

JOB PROFILE:-

Reviewing the Quality Assurance Plans (QAP) / Inspection Test Plans (ITP), Procedures, Material Test Certificates (MTC), WPS and PQR according to Drawings, and Specifications to determine inspection requirements and submitting to EDMS..

Arranging TPIA for the timely completion of all inspection activities as per ITP and project requirement for each Purchase Order (PO).

Giving the Dispatch Clearance of various items after review the Inspection Report (IR) and Inspection Release Note (IRN) with supporting documents.

Reviewing the IMIR and carry out material identification of incoming Materials/Items as per client requirement.

Reviewing the Calibration certificates for various equipment which are used in Welding, Painting, Testing and Inspection.

Reviewing the Propose Welding Procedure Specification (PWPS) for qualify and approval for the Welding Procedure Specification (WPS).

Witnessing the Welders Qualification Test (WQT) and Electrode Qualification Test (EQT) according to approved WPS.

Verifying the procedures and personnel employed for carrying out Welding & NDT are qualified.

Inspecting the fit-up of joint proper alignment as per approved drawing.

Inspecting the filler metals for welding and consumable base metals.

Inspecting the welding before, during and after and monitoring the welding parameters according to approved WPS and PQR.

Monitoring the Pre and Post Weld Heat Treatment (PWHT), where specified.

Witnessing of Destructive Testing (DT) like Ultimate Tensile Test (UTS), Bend Test, Impact Test, Hardness Test, Micro Test, Micro Test, Nick Break Test etc..

Witnessing of Non Destructive Testing (NDT) UT, PAUT, MT and PT.

Reviewing the Radiography Testing films (RTFI).

Inspecting the Blasting and Painting of bare pipes and Steel Structures.

Witnessing the Dry Film Thickness (DFT) and Holiday Test of pipes.

Conducting the pipeline walk down for ensuring that the Items / Equipment which are installed with line are as per drawing and Bill of Material (BOM).

Reviewing the Fit-up & Weld Visual Reports, Dye Penetrate Test (DPT) Reports, Magnetic Particle Test (MPT) Reports, Ultrasonic Test Reports, Positive Material Identification (PMI) Test Reports, Line History Sheet (LHS) Reports and Test Packs.

Witnessing the Visual & Dimensional Inspection of final fabricated items like Pipelines, Beams, Columns, Guarders and other supporting Steel Structures.

Witnessing the Positive Material Identification (PMI) Test, Hydrostatic Test and Holiday Test.

Preparing Daily Progress Reports (DPR) and to submit client.

Responsible for product & process qualification, NCR handling & root cause analysis.

Knowledge of Welding like SMAW, SAW, TIG, MIG, FCAW and ERW.

Conducting the Tool Box Talk with Welders, Fabricators and Quality Department for improve the product Quality with Safety and reducing the Welder Repair Rate. Client: - CAIRN Oil and Gas – Vedanta Ltd., Barmer, Rajasthan COMPANY PROFILE:-

RINA India Pvt. Ltd. is promote a green approach to the Marine industry with a strong commitment to energy saving, emissions reductions and optimization of fuel consumption. We help support the sustainable growth of Energy operators throughout the world to meet growing market demands in oil and gas, power generation (conventional, renewables and power grids) including environmental protection.

Our third-party Certification services provide an independent guarantee of compliance with associated regulatory standards, in order to support enterprises across all aspects of projects, operations, logistics and legislation. Ship classification has been at the core of our business since its inception and today it makes us one of the top-ranking marine classification societies in the world. Over time, we’ve progressively extended our services and expanded our range of operational sectors. JOB PROFILE:-

Up keeping Calibration records of all Instruments which are being used for Testing & Welding.

Preparation of the calibration drawing & calibration block on the basis of various standards.

Material planning for NDT department.

Manual Ultrasonic Testing of Plates & Pipes and prepare inspection reports.

Prepare Daily Inspection Reports and Daily Progress Reports of the all QA/QC-NDT activity.

Ensure the relevant quality control inspections and tests (NDT Tasks) are planned and executed.

Carried out Visual & Dimensional Inspection of incoming Raw Materials (HR Coils), after milling, after welding at Pre-visual and Final Visual & Dimensional Inspection at Final Stag & prepare VDIR and offer to TPI/Client.

Witnessed of Hydro Testing of Pipes.

Prepare Daily Inspection Reports and Daily Progress Reports of the all QA/QC-NDT activity.

Reviewed & witness the all QA/QC-NDT documents to Client.

Coordination with Clients/TPI and HOD for daily activities for Quality of Products. Clients:- Doosan Power System (I) Pvt. Ltd., GE Power India Ltd. (Alstom India Ltd.), Uttar Pradesh Vidyut Utpadan Nigam Ltd., Jindal Steel & Power ltd., BHEL etc. COMPANY PROFILE:-

International Certification Services (ICS) Pvt. Ltd. is established as an independent Certification and Inspection body with its main objective to safeguard life, property and environment through quality assurance and total quality management. ICS has been providing their value added certification and inspection services to the Government, Public and Private Sector Organizations involved in Land, Offshore, Marine activities. It is a professional organization backed by Devoted, Highly Qualified and Experienced personnel. We provide a wide spectrum of customer oriented Certification and Inspection services in an efficient and cost effective manner. National Accreditation Board for Certification Bodies (NABCB) for Quality Management System for specific sector & Environmental Management System for Chemical products & Fibers, Rubber & Plastic products. ICS well established Quality Assurance System and has been accredited by JAS-ANZ, the Joint Accreditation System of Australia and New Zealand, Australia for Quality and Environmental Management Systems. JOB PROFILE:-

PIPE LINE PROJECTS (CGD & Cross Country):-

M/s. Mahanagar Gas Ltd. – Mumbai (joint venture of British Gas, GAIL and Govt. of Maharashtra) and M/s. Maharashtra Natural Gas Ltd. – Pune (Maharashtra).

Inspection of Trail pit, Trenching, Welding, Coating, Lowering, Back filling and Root marker for pipeline.

Verification of Backfilling Reports & approval of as laid drawing.

Review Material Test Certificates (MTCs) and carry out material identification as per requirement.

Review calibration certificates for various equipment which are used in testing and Inspection.

Witness Welders Qualification Test and Electrode Qualification (EQT).

Witness of NDT like VT, UT, PT and RT film review.

Witness of Hydro Testing and Pneumatic Testing of Pipes and Pipelines.

Installation, testing and commissioning of various component of domestic gas connection like meter control valve, pressure regulator, gas consumption meter, copper tube, appliance valve etc.

VENDOR INSPECTION:-

Bare Pipes and 3 LPE Coated pipes inspected for M/s. Gujarat Gas Company Limited (GGCL) and Green Gas Limited (GCL) at M/s Bhushan Steel Ltd. (BSL) Khopoli (Maharashtra).

Witness of Hydro Testing, Manual and Auto Ultrasonic Testing, Magnetic Practical Testing UTS, Root Bend, Face Bend, Side Bend, Nick break, V notch impact test, Micro itching, Hardness test etc. for line pipes.

HPCL RVI Inspection at vendor premises: Material identification and inspection, visual and dimensional inspection as per approved Checklist/drawing and technical specification

Raw material & online inspection of Steel pipes, Copper tubes, GI and PE pipes & fittings at JISL, DURA LINE, KIMPLAS & GLYNWED for MNGL, GGCL, IGL etc.

Third party inspection as per QAP, PO and relevant standard for Pipes, Fittings, valves, fire extinguisher etc. for GGCL SGL and IGL.

IGL materials like Copper tubes, inspection at Rajco Metals Pvt. Ltd. and Corrugated Flexible Metal Hose pipes (Anaconda) inspection at Chandan Enterprises.

Witnessed Eddy Current Testing of Copper Tubes.

RETAIL OUTLET AUDIT OF BPCL, IOCL & RELIANCE Industries Ltd.

Coordination of Reliance RO Audit project of Reliance Ind. Ltd. Navi Mumbai.

Inspection for Quality, Quantity, House Keeping, Customer Services, Automation system.

Training attended at BPCL Wadala (Mumbai) depot for BPCL RO audit.

Preparation of Daily and Monthly Inspection Reports.

(Clients: - Mahanagar Gas Ltd., Maharashtra Natural Gas Ltd., BPCL, HPCL, GGCL, IGL, ONGC, JISL Rajco Metals Pvt. Ltd., Chandan Enterprises, Green Globe Fuel Solution etc.) COMPANY PROFILE:-

Pratibha Industries Ltd. Group is well-known and well fame among Pipe and Steel Structural industries. It is an ISO 9001:2000 certified company and manufacturing large diameter 16” O.D. to 100” steel pipes (HSAW and LSAW) use for Petrochemicals, Refinery & Power Plant and Transportation of Water, Oil, Gas etc. It is India’s largest industries house. They have coating plant with facility of inside and outside 3 LPE coating of pipes. In addition to pipes the plant also manufactures custom built structural steel products for onshore and offshore applications.

DESIGNATION:-Engineer (NDT)

JOB PROFILE:-

Preparation of the calibration drawing & calibration block on the basis of various standards.

Up keeping Calibration records of all Instruments which are being used for Testing & Welding.

Welding inspection Before, During & After, as per welding parameters according to approved WPS and PQR.

Visual & Dimensional Inspection of incoming Raw Materials & Pipes and fit-up of Beams, Columns, Pipes etc. according to approved Drawing and Quality Assurance Plane (QAP).

Operating, setting & probe arrangement for IIX mode of Auto Ultrasonic Testing (AUT/Pipe UT) machine for calibration & inspection with RD Tech. make CANADA.

Thickness measurement of Plates and Manual Ultrasonic Testing of welded Pipe sand steel structures

(TKY joints) like Beam, column, Guarders etc.

Witness of Hydro Testing of Pipes.

(Clients: - GAIL, Delhi Jal Board, L & T MHI Boilers Ltd., Saipem (I) Ltd., MAHAGENCO, BMC etc.) COMPANY PROFILE:-

Welspun Corp. Ltd. (www.welspuncorp.com)Welspun Group is a USD $3 billion dollar group with diverse business interests that range from SAW pipe manufacturing to tubular products and textiles. Welspun corp. Ltd. has one of the largest capacities of manufacturing SAW (L-SAW and H-SAW) and ERW pipes with capability to produce inch to 100 inch pipes for all applications and therefore provides a one spot shop, for all pipe solutions. WELSPUN has to its credit, completed many prestigious projects, the latest being supply of pipes for the laying of the World’s deepest pipeline in the Gulf of Mexico, USA. Anjar pipe Complex is accredited with all QMS (ISO-9001:2000), API & HSE (ISO-14001& OHSAS-18001) Management Certification Systems. DESIGNATION:-Quality Control Inspector (NDT)

JOB PROFILE:-

Radiography Film Interpretation Under various inspection EIL, SGS, DNV GL, TUV, BVIS, & VCS, MECON, RIGHTS etc..

Operating & setting Auto Ultrasonic Testing (AUT/Pipe UT) machine for calibration & inspection with NDT Tech.

Worked in ERW (Electric Resistance Welding - HFW) plants With Scan Master make Israel.

Material planning for NDT department.

Prepare Daily Inspection Reports and Daily Progress Reports of the all QA/QC-NDT activity.

Reviewed & witness the all QA/QC-NDT documents to TPI/Client.

Up keeping Calibration records of all Instruments which are being used for Testing & Welding.

Check the fit-up of joint proper alignment as per drawing.

Coordination with Clients/TPI and HOD for daily activities for Quality of Products.

(Clients: - IOCL, GAIL, Kalpataru Power Trans. Ltd., L & T Ltd., ANADARCO- USA etc.) COMPANY PROFILE:-

PSL Ltd. group is well-known as “God Father of Spiral Saw Pipes” and well fame among pipe and steel industries. It is an ISO 9001:2000 certified company and manufacturing large diameter steel pipes (SAW and Ductile Iron pipes) for transportation of Water, Oil, Gas etc. It is India’s largest industries house. They also have coating plant with facility of inside and outside coating of pipes. Our SPIRAL PLANT has manufacturing range from 16” O.D. to 86” O.D length from 6 to 12.7meters, low carbon SAW welded. Annual production capacity is approx. 250,000 Metric Ton. The raw materials/ coils used for these are basically Mild Steel. It is equipped with latest OFFLINE welding mill with PLC, and Laser tracking system. The job consist inspection of Plate and Pipe Weld seam & helical Weld seam by Ultrasonic testing making reports and its analysis with graphical data.

DESIGNATION:-Quality Control Inspector (NDT)

JOB PROFILE:-

Carried out Penetrate Testing in shop with Interpretation & Evaluation of defects.

Testing Pipe Weld seam & Bevel by Magnetic Particle Testing for interpretation of various types of defects by Coil,Yoke & Prod Technique with Florescent and Non Florescent (Visible) method.

Preparing all types of NDT procedures, Reports and DPR (Daily Progress Report).

(Clients: - IOCL, GAIL, BHEL etc.)

ADDITIONAL WORK:-

Hand on experience of measuring instruments like Measuring tap, PI tap, Micrometer, Vernier Caliper, Welding Gauge etc.

Familiar with API 5L, API1104, API 5CT, ASTM, ASME Sec. II, Sec. V, Sec. VIII, Sec. IX, AWS D1.1, DIN, IS, ISO, TEMA, IBR etc.

Minimize operation coast and maximize the productivity.

Maintaining Safety environment in plant & at site and Safety Promotional activity.

Manage Manpower and shift.

Good communication with seniors & juniors.

Ability to take complicated technical issues.

Energetic and dynamic with good attitude.

COMPUTER PROFICIENCY:-

Microsoft word, Microsoft excels Power Point, Internet Surfing, and ERP & SAP. PERSONAL PROFILE:-

Name : - Umesh Kumar Trivedi

Father’s Name : - Shree Himmatramji Trivedi

Date of Birth : - November 05th 1982

Nationality : - Indian

Languages Known :- Hindi, English, Marathi, Guajarati & Rajasthan. Marital Status : - Married

Religion : - Hindu

Passport Details : - No.- J6762807, Issue from – Jaipur, Date of Issue – 01/06/2021, Date of expiry :– 31/05/2031

Permanent Address :- At-post – Paloda, Tal. - Garhi. Dist.- Banswara, (Rajasthan) Pin -327605 I hereby declare that all the above information is true to the best of my personal knowledge. Place: Mumbai Dated: / /2024 (UMesh Kumar Trivedi)

(Plant tree, save tree and save Life.)

Contact this candidate