MICHAEL T. HALL

*** **** **** ******

Sand Springs, OK 74063-2869

Home: 918-***-****

Cell: 918-***-****

Email: ad3ki0@r.postjobfree.com

CERTIFICATIONS / TRAINING

AWS Certified Welding Inspector #96050071 Exp. 05-2026

ASNT Level II Certifications in: Exp. 05-2026

-Visual Inspection

-Magnetic Particle Inspection

-Dye Penetrant Inspection

-Level II Film Interpretation

WELDING

-Pipeline Repair (CT 9.5, 37, 40.1-40.5, 40.7, & 40.91)

-Maintenance Welding on Pipelines (CT 42)

Welding Qualifications in SMAW, GTAW, SAW, GMAW / API and ASME Section IX.

Cleveland Inspection Services, Inc

Safety Training: Confined Spaces, Electrical Safety, Fall Protection, Fire Prevention and Safety, Hazard Communications, Hydrogen Sulfide (H2S) Safety Awareness, Lockout / Tag out For Affected Employees, Personal Protective Equipment, Respiratory Protection, Slips, Trips, & Falls, Trenching & Shoring.

Current Hazwoper 24 hour General Training

AWS/CWI 9 Year Recertification Seminar

Section IX, Welding Codes and Standards

Windows 95

EXPERIENCE

July 2022 - Current

Global Inspection Services / OneOk

AWS/CWI Chief Welding Inspector

Duties included inspecting all aspects of welding both pipe and structural

fabrication, auditing x-rays, inspecting blasting and coating. Inspection

of materials received and MTR verification. Witnessing of hydro testing

and assembly of piping and valves to fabricated skids at Circle B Measurement

July 2021 – May 2022

Vertex Group / OneOk

AWS/CWI Senior Welding Inspector

Duties included inspecting all aspects of welding both pipe and structural

fabrication, auditing x-rays, inspecting blasting and coating. Inspection

of materials received and MTR verification. Witnessing of hydro testing

and assembly of piping and valves to fabricated skids at Circle B Measurement

in Tulsa, Oklahoma.

Projects: Various meter skids for OneOk.

May 2021 – June 2021

On Shore QCS – Workrise / OneOk – WesTex Northbound II Line 110 Uprate

AWS/CWI Senior Welding Inspector

Duties included monitoring all aspects of welding both pipe and structural

fabrication, auditing x-rays, blasting and coating, materials MTR’s, hydro

testing, and assembly of units to skids at Circle B Measurement and

Fabrication in Tulsa, Oklahoma.

Projects: Four run Coriolis Meter Skids.

February 2020 – July 2020

On Shore QCS – Rigup / OneOk – Arbuckle II Venture

AWS/CWI Senior Welding Inspector

Duties included monitoring all aspects of welding both pipe and structural

fabrication, auditing x-rays, blasting and coating, materials MTR’s and

assembly of units to skids at Circle B Measurement and Fabrication in

Tulsa, Oklahoma.

Projects: Dual run Coriolis Meter Skids.

April 2019 – January 2020

Frontier Integrity Solutions / OneOk - Arbuckle II Venture

AWS/CWI Welding Inspector

Duties included monitoring all aspects of welding both pipe and structural,

fabrication, auditing x-rays, hydro testing, blasting and coating, materials

MTR’s and assembly of units to skids at Big Elk Energy Systems in Tulsa,

Oklahoma.

Projects: 30” X 36” traps, 12” triple run Coriolis Meter Skid.

May 2018 – December 2018

Natural Energy Field Services / Kinder Morgan – Gulf Coast Express

AWS/CWI Lead Weld Inspector

Duties included inspection of all aspects of welding per codes of Kinder

Morgan, and API 1104 codes. Auditing x-ray film, monitoring shipping

of fabricated parts, inspecting of fabrication at sub-contractors, and working

closely with fabricator to insure quality product delivered to Kinder Morgan.

February 2018 – May 2018

Frontier Integrity Solutions / Energy Transfer – Red Bud Meter Station

AWS/CWI Inspector III

Duties included insuring that meter station constructed per Energy Transfer

specifications and drawings. Meter station engineered by Enable Midstream

Partners to be operated by Energy Transfer. (Ardmore, Oklahoma)

October 2017 – December 2017

Tulsa Inspection Resources / OneOk (A1000 Washita River Bore) 1000 ft. 12”

AWS/CWI Senior Welding Inspector

Duties included monitoring boring of the river and pulling in of 12” bore pipe. (ARO)

Inspected welding of tie in welds to existing line. Monitor removal of old pipe line

over Washita River, removal of pipeline bracing and final clean up.

June 2017 – September 2017

Tulsa Inspection Resources / Semgas (Canton Lake Phase 1) 20 miles/24” pipe

AWS/CWI Senior Welding Inspector

Duties included overseeing welding inspection including mainline and tie in welding.

Daily x-ray reports and installation of launchers, receivers and valve settings.

March 2017 – May 2017

Frontier Integrity Solutions / Energy Transfer

AWS/CWI Welding Inspector

Duties included working as fabrication inspector for ETC backhaul projects.

Uploading of welder certs, x-ray certs and daily weld log reports to ETC’S

computerized system. Witnessed welder testing and hydro testing. Worked

with API 1104 and ETC code and specifications. Project includes pipe sizes

ranging from 2” to 36”.

January 2017 – March 2017

Tulsa Inspection Resources / Kinder Morgan

AWS/CWI Welding Inspector

Duties included witnessing welder testing, auditing x-ray film, MTR’S, weld

maps, checking coating, fit up, welding, hydro testing and final prep for

shipment.

December 2016 – January 2017

Tulsa Inspection Resources / OneOk

AWS/CWI Welding Inspector

Duties included auditing MTR’S, witnessing fabrication of two 2” skid mounted

meter runs. This includes x-ray film auditing, fit up, welding, hydro testing,

coating and final prep for shipment.

November – December 2016

Tulsa Inspection Resources / Pipeline Equipment

AWS/CWI Welding Inspector

Duties included witnessing the fabrication of two 20” X 16” launcher/receiver

barrels and two 16” X 8” launcher/receiver barrels with accompanying

components. This includes auditing MTR’S, welders and welder certifications.

November 2016

Tulsa Inspection Resources / Sanchez Oil and Gas

AWS/CWI Welding Inspector

Duties included inspection of 20” pipe at storage facility. Inspected pipe for

coating damage, ovalitty, wall thickness, pitting, rusting and general overall

condition of pipe.

November 2016

Furmanite Inspection / DCP Midstream

AWS/CWI Welding Inspector

Duties included auditing material test reports, inspecting final fit up, final dimensions, final coating of fabricated parts per drawing specifications and

current AWS D1.1 welding codes.

September 2016

Furmanite Inspection / Renewable Energy

AWS/CWI Welding Inspector

Duties included witnessing final 8 hour hydro test of heat exchanger bundle per

ASME SEC VIII.

January 2016 to 2017

TGR Industrial Services, Inc.

AWS/CWI Welding Inspector

Duties included testing/qualifying welders to AWS D1.1, D1.4, D1.5, D17.1, API

1104, ASME IX and other codes as requested. Field inspections at various

fabrication shops, in and around the Tulsa area.

January 2014 to October 2015

Tulsa Inspection Resources, Inc. / Oneok

AWS / CWI Welding Inspector

Duties included monitoring welding to API 1104, and overseeing cement/utility work. Monitoring electrical work and insulation and dirt work at new compressor station facility. Pipe diameter was 30”, 20”, 12”, 8”, 6”, 4”, 3”, 2” and 1”.

May 2014 to December 2014

Tulsa Inspection Resources, Inc. / Oneok

AWS / CWI Welding Inspector / Chief

Duties included monitoring welders, and insuring compliance with API 1104.

Monitoring installation of four new compressors. Inspection of coating, painting and

insulation installation. Pipe diameter was 30”, 20”, 12”, 8”, 6”, 4”, 3”, 2” and 1”.

December 2014

Tulsa Inspection Resources, Inc. / Plains All American Pipeline LP

Wheeler Extension

NDE / X-ray film auditor

Duties included auditing of all x-ray film and procedures. MT and PT reports and

daily weld log. Cataloging all x-ray welds and repairs. Pipe diameters: 12”, 8”, 6”,

4”, and 2”.

2014

Tulsa Inspection Resources, Inc. / Plains All American Pipeline LP

Cold Water Extension

NDE / X-ray film auditor

Duties included auditing of all x-ray film and procedures. MT and PT reports and daily weld log. Cataloging all x-ray welds and repairs.

2013 to 2014

Tulsa Inspection Resources, Inc. / Enterprise (Texas Express Pipeline)

AWS / CWI Welding Inspector

Duties included all aspects of fabrication inspection, MTR’s red lines, as built

drawings, welding and hydro testing. Utilizing API 1104 and Enterprise welding

specifications. Testing of welders for project. Monitored excavating, coating, sand blasting, cleanup, backfilling and pigging. Pipe diameter 18”, 12”, 6”, a

2013

Tulsa Inspection Resources, Inc. / Enterprise

AWS / CWI Welding Inspector

Duties included monitoring welders in all aspects of pipeline repair, utilizing API

1104 and Enterprise welding specifications.

Monitored excavating, coating, sandblasting, backfilling, hydro testing and cleanup

as required by Enterprise specifications.

2011 to 2013

Tulsa Inspection Resources, Inc. / Enbridge

AWS / CWI Inspector

Duties included inspection of all aspects of pipeline repair using full encirclement sleeves, utilizing API 1104 and Enbridge welding specifications.

Monitored excavating, coating, sandblasting, backfill and cleanup as required by Enbridge.

2011

Tulsa Inspection Resources, Inc. / Plains Pipeline

PM/Chief Inspector

Duties included overseeing all aspects of construction of new pipeline installation; R.O.W. clearing, trenching/ditching, stringing of pipe, welding of pipe, coating of pipe, x-ray/NDE of welds, lowering end, back filling, hydra testing, clean up, creating as built and well maps.

Used API 1104 federal code regulation

2011

Tulsa Inspection Resources, Inc. / Questar

AWS/CWI Chief Welding Inspector

Duties included inspection of fabrication, tie-in welding, weld, and x-ray mapping.

Used API 1104 standard.

2010 to 2011

Tulsa Inspection Resources, Inc. / Sunoco Logistics.

AWS/CWI Chief Welding Inspector

Duties included staking dig sites, overseeing the excavation of pipeline and installation of various types of pipeline repair techniques (clock springs, full encirclement sleeves), performing maintenance inspection of pipeline and recoating requirements.

Used API, ASTM, AWS, and DOT standards on this job.

2008 to 2010

Tulsa Inspection Resources, Inc. / Enterprise Pipeline

AWS/CWI Chief Welding Inspector

COR trained for issuing permits.

Overseeing the installation of “Type B” sleeves.

Also performed various inspection duties related to pipeline rehabilitation (i.e., emailing photos, daily safety meeting reports, etc.).

Used API, ASTM, AWS, and DOT standards in this position.

2006 to 2008

Tulsa Inspection Resources, Inc. / Magellan Pipeline Partners LLC

AWS/CWI Chief Welding Inspector

Attended pre-inspection, pre-job meetings, qualified welders, making of as built drawings, weld map drawings.

Inspected fabrication, reviewed radiographic film, witnessed and reviewed hydrostatic testing, material control, daily reporting of documentation to project engineers and tank ring wall construction (i.e., emailing photos, daily safety meeting reports, etc.),

Used API, ASME, DOT, ASTM, and AWS standards in this position.

2005 to 2006

Tulsa Inspection Resources, Inc. / TransCanada

AWS/CWI Chief Welding Inspector

Performed qualification of welders (SAW and SMAW) and visual inspection of fabrication and welding per API standards.

Documentation of weld maps, x-ray reports, hydrostatic test reports, witnessing hydrostatic testing, photo documentation, computer documentation and shipping verification.

2004 to 2005

Tulsa Inspection Resources, Inc. / Explorer Pipeline

AWS/CWI Chief Welding Inspector

Inspection of welding and fabrication of upgrades, witnessing DOT hydrostatic testing of delivery lines, inspection of coating, backfilling excavation, atmospheric testing and record keeping.

Worked directly with the project engineer using API and DOT standards.

OQ qualified.

Locating of underground pipeline, installation of TOR’s, inspection of pipeline coating, back filling, excavation, fence installation, installing meter provers and hydrostatic testing distribution lines.

2004

Tulsa Inspection Resources, Inc. / National Energy and Gas Transmission

AWS/CWI Welding Inspector

Inspected removal and installation of compressor piping components, valve settings and piping at pump station.

Inspected installation of launcher/receiver.

Attended pre-inspection, pre-job and NEGT safety orientation.

OQ qualified.

2004

Tulsa Inspection Resources, Inc. / KOCH Pipeline

AWS/CWI Level II Welding Inspector

Locating transmission lines, welding procedure qualification and vender/shop inspection.

2004

Cleveland Inspection Services, Inc / Consumer Energy Company

Chief Welding Inspector

Witnessing testing of valves of various sizes at manufacturing plant in Stafford, TX.

2003

Cleveland Inspection Services, Inc / Colonial Pipeline Company

Chief Welding Inspector

Installation of new pumps and piping at three locations

Attended pre-inspection, pre-job and first aid safety training.

Conducted welder qualification testing per API standards, monitoring welders, visual inspection of welds, creating weld history log, and weld location maps, creating as built drawings, and verifying jeeping of coating

2002

Cleveland Inspection Services, Inc. / Southern Natural Gas

Chief Welding Inspector / NDE Welding Inspector

Installation of new Compressor station.

Attended pre-inspection, pre-job and safety orientation meetings.

Duties included film interpretation, and conducting welder qualification testing per API standards, monitoring welders, visual inspection of welds, creating weld history log, as built drawings, weld location maps, monitoring excavation, monitoring coating, monitoring back filling, and witnessing hydrostatic testing, and monitoring hot tap installation.

Working closely with client engineers, technicians and welders.

Created as built drawings and weld location maps.

2001 to 2002

Cleveland Inspection Services, Inc. / Willbros Engineering

NDE/Welding Inspector

12” Explorer Pipeline Expansion Project Pkg. 2.

Attended pre-inspection, pre-job and safety orientation meetings.

Duties included film interpretation Level II, visual inspection of welds, inspection of welder tests, monitoring welders, creating weld history log, created weld location maps, as built drawings and monitored hydro testing of piping components.

API standards used for this project.

2001

Cleveland Inspection Services, Inc / Gulfstream Natural Gas

Senior Welding Inspector III

Station 100 compressor project

Attended pre-inspection, and pre-job meetings.

Documentation, form formatting, inspection of skid mounted piping, inspection of piping fit up, inspection of welding and welding procedures, coating inspection, structural fit up and welding inspection.

Insulation inspection and maintaining of daily x-ray log.

On site inspector of components at fabrication plant.

ASME and API standards used.

2000 to 2001

Cleveland Inspection Services, Inc. / Western Gas Resources

Welding Inspector

Fort Union Gas Gathering Expansion Project.

Visual inspection of pipeline welds, inspection of welder tests, monitoring welders and correct usage of welding procedures.

Monitored road bores, directional drilling, lowering-in, coating, stringing of pipe, overseeing the loading of pipe, trench inspection, and other aspects of pipelines.

2000 to 2001

Cleveland Inspection Services, Inc. / Pioneer Pipeline

NDT Inspector Corporate Level III

12” expansion project.

Film interpretation, documentation, form formatting, data entry in excel to general new forms and weld history log, coating inspection, trench inspection, back fill inspection, tie-in welding inspection and right-of-way inspection.

1999 to 2000

Cleveland Inspection Services, Inc.

Certified Welding Inspector

Performed all types of inspection duties, including coating inspection, above and below ground, and verification of thickness.

Performed and witnessed NDE procedures, visual inspection of welds and welding procedures as required by client specifications and applicable codes.

Traveled to various job sites, communicating between client and vendor.

1990 to 1999

Sagebrush Pipeline Equipment Company, Inc.

CWI Inspector, Fitter, Welder-SMAW, SAW, GTAW, and GMAW.

Inspection of fabricated pig launchers and pig receivers and various skid mounted piping units.

API and ASME.

1989 to 1990

Braden Manufacturing

Fitting and welding of large structural components from blueprints.

1987 to 1989

Oil Capital Sheet Metal, Inc.

Welding and fabrication of all types of sheet metal products.

REFERENCES

Available upon request.

Contact this candidate