Welding and NDE Integrity Specialist
Resume:
INFO
Name
Address
Phone
PMI-RMP® number *****
Cswip 3.1 number 79210/2
ASNT-TC-IA RT,UT,MT,PT II
SOCIAL
https://www.linkedin.com/
in/nauman-khan-
800644a2
https://www.facebook.
com/Nomanysfzai
REFERENCES
Nauman Khan
WORK EXPERIENCE (Summary)
EDUCATION
SKILLS AND EXPERTIZE
Mechanical/Welding and NDT Consultant
Welding/NDT Third Party
Mech. Welding & NDT Supervisor
Dadabhouy Institute of Higher Education,
Karachi Pakistan
JACOBS ZATE/WORLEY
ELEMENT MATERIAL TECHNOLOGY
KSEW
Ensured successful completion of Mechanical Welding & NDT Inspections deliverables and monitoring of project performance for Inspection tasks, schedules and costs
Follow-up tasks with field team, deadlines and milestones for all stake holders and resources.
Bachelor of Technology (Hons) in Metallurgy &
Material Engineering from Dadabhouy Institute of
Higher Education Karachi
Mechanical Fab
Welding & NDT
Risk Management
Quality Control
Project Mgt
Mechanical/Welding & NDT Consultant
Nauman Khan
Riyadh
Saudi Arabia
ad3gsx@r.postjobfree.com
2012-2016
Project Engineer-Jacobs/Worley
Cell: +966*********
Aftab Azeem
Element Material Tech
Cell:+966*********
2017-2018
2018-2020
2020-PRES
Inspect fabrication, welding, DT & NDT until commissioning of SLTS.
Hany Barakat
ad3gsx@r.postjobfree.com
2014-2016 QaQc Inspection Engineer
Descon Engg.
Supervising Pre-commissioning & commissioning activities. 2014-2014 Qc Shutdown Supervisor
DESCON ENGINEERING QATAR
Supervises all direct team shutdown piping and equipment's works.
2011-2013 Nuclear Plant NDT INSPECTOR
INSPECTESTS PVT LTD.
Supervise all NDT(VT,RT,UT,MT,PT,PAUT) Inspection activities. 2010-2011 Foundry QaQc Supervisor
ATLAS ENGINEERING
Supervises all team Foundry and Machining activities . The 412km long twin pipeline, with two 88’’ pipes will be one of the largest water transmission system worldwide and will transport 1.2 million m3 of portable water per day. The project cost is($5.64 billion)
Language
English: Fluent
Urdu: Fluent
Nationality
Pakistani
Location: KSA
Location: KSA
Location: Pakistan
Location: Pakistan
Location: Qatar
Pakistan
Location: Pakistan
ad3gsx@r.postjobfree.com
NAUMAN KHAN
TECHNICAL EXPERTISE
Mechanical /Welding & NDT Consultant
Page 2
PROFESSIONAL PROFILE SUMMARY
My professional experience is more than 13-years experience of Mechanical & Welding Inspection with reputable Clients including Nuclear Plant, Dolphin Energy, Qatar Petroleum, Aramco, SWCC, Airline & Shipyard. With professional experience. I have Bachelor degree in Metallurgy and Material Science. PMI-RMP, Welding technology and have Cswip 3.1. as well as NDT (RT, UT, PT, MT) level II. I have also experience as a Third Party Welding Inspection in which all the Welding Technique is used with different clients including Manual, Automatic or Semi-Automatic welding machines. After completion of Welding NDT (VT, RT, UT, PT, MT) is also our scope of Inspection, then Destructive testing (Tensile Test, Bend Test, Hardness Test, Chemical and Failure) is also performed by Element Material Technology KSA. I have also experience as a consultant in Worley which we review all procedures for Welding, NDT & DT, Hydro test till the dossier and commissioning. I have excellent communication skills with ability to relay the results of the inspection and to keep excellent records of all NDT & DT tests runs and inspection conducted. I pay close attention to detail and I have the knowledge and experience to ensure that all work meets the specification, quality and safety standards set forth by the company and the local, state and federal regulations. I have the physical strength and stamina to perform any challenge. ENGINEERING EXPERTISE:-
Witnessing PQR and WQT & HSS Qualification Test.
Preparing NDT and DT Scope according To ASME Sec IX, API 1104, AWS D1.1 and Aramco Standard.
Monitoring Stage Inspection from Base Material, Welding Consumables, NDT & DT till Final Stage.
Prepare Final PQR and Welder Qualification Cards Supervise, co-ordinate and schedule the activities of workers who shape, form and join metal parts or products to specified dimensions, machine metal into parts, products, tools and dies. Establish methods to meet work schedules and co-ordinate work activities with other departments Requisition materials and supplies
Resolve work problems and recommend work measures to improve productivity CONSTRUCTION EXPERTISE:-
Checking of Material, MRIR & MTC and Preparation of Reports.
Practical experience of performing VT, DPT, MPI,WFMT
Inspection of Fit-up, Welding of joint & Tie in Joints as per Drawing and Project Specification.
Inspection of Vessels, Heat Exchangers, Storage Tanks, AFC, Filters, Furnace, Column and Boilers before and after Mechanical Cleaning & Repairing & keep Record of the Observation and Test Reports as per API 510 and API 653.Inspection of Painting of Steel Structure, Piping, Vessels, Storage Tanks after Normal Scraping & Grit/Sand Blasting as per Project Specification & keep Record of the Test Report.
Responsible for the NDT of Welding Joint (VT, DPT, MPI, WFMT) as per ASME Section IX & keep Record of the Test Report.
Responsible for WQT as per WQT Specification.
Responsible for Fabrication & Installation of Steel Pipes as per Drawing.
Arranging NDT (DPT, MT, UT, RT, RBI and WFMT) as per ASME code section V.
Inspection of Mechanical Valves before and after Pressure Test.
Inspection of Bolted Joints after Changing of new Gaskets & Bolt Tightening. NAUMAN KHAN
TECHNICAL EXPERTISE
Mechanical/Welding & NDT Consultant
Page 3
Feb 2020-Present
Mechanical/Welding & NDT Third Party Inspector
JACOBS l Worley Location: KSA
Performs quality control requirements to be performed for company engineering projects: issues general manual for quality control supported by project specific requirements in order to achieve the proper level of quality and fitness for purpose of company installations.
Provides problem solving services to different company teams in matters that fall within the scope of the team function and responsibilities, by analyzing the problem, performing appropriate laboratory testing, non- destructive examination, chemical analysis, etc.
using the team laboratory or other local or external facilities and provide technical reports and studies in order to avoid reoccurrence. Prepares and provides technical and contractual requirements for different inspection/corrosion agreements and consultancy services to be contracted locally and abroad. This is achieved through communications with various company teams, local and overseas organizations and department heads in order to obtain the most viable and cost effective agreement. Shares in performing technical and quality audits on vendors, manufacturers, bidders, contractors, etc. by visiting and evaluating their capabilities, experience resources, quality systems, etc. in order to assess their suitability for inclusion into the team and/or company contracts or service agreements.
Controls and supervises the inspection activities related to in-service plant and equipment, e.g. gathering centers, booster stations, tank farms, pipelines, etc.
The activity is achieved by planning and supervising the inspection/corrosion work to be made by subordinates and issuing repair, protection, examination and retesting requirements then issuing validity certificates and future recommendations.
The purpose of the work is to ensure the safety and integrity of plant and equipment in order to prevent/minimize hazards to life and property, and ensure continuity of operations. 15 Oct 2018-31 Jan 2020 Element Material Technology Location: KSA
Checking of Material and Preparation of Reports.
Practical experience of performing VT, DPT, MPI,WFMT
Inspection of Fit-up, Welding of joint & Tie in Joints as per Drawing and Project Specification.
Inspection of Vessels, Heat Exchangers, Storage Tanks, AFC, Filters, Furnace, Column and Boilers before and after Mechanical Cleaning & Repairing & keep Record of the Observation and Test Reports as per API 510 and API 653.
Inspection of Painting of Steel Structure, Piping, Vessels, Storage Tanks after Normal Scraping & Grit/Sand Blasting as per Project Specification & keep Record of the Test Report.
Responsible for the NDT of Welding Joint (VT, DPT, MPI, WFMT) as per ASME Section IX & keep Record of the Test Report.
Responsible for WQT as per WQT Specification.
Responsible for Fabrication & Installation of Steel Pipes as per Drawing. NAUMAN KHAN
Shipbuilding QAQC/NDE Supervisor
Mechanical/Welding & NDT Consultant
Page 4
22 May 2017-10 Oct 2018
QAQC Engineer
KSEW Location: Pakistan
1 May 2014- 31 Dec 2016 Descon Engineering Ltd. Location: Pakistan
Checking of Material and Preparation of Reports.
Practical experience of performing VT, DPT, MPI,WFMT
Inspection of Fit-up, Welding of joint & Tie in Joints as per Drawing and Project Specification.
Inspection of Vessels, Heat Exchangers, Storage Tanks, AFC, Filters, Furnace, Column and Boilers before and after Mechanical Cleaning & Repairing & keep Record of the Observation and Test Reports as per API 510 and API 653.
Inspection of Painting of Steel Structure, Piping, Vessels, Storage Tanks after Normal Scraping & Grit/Sand Blasting as per Project Specification & keep Record of the Test Report.
Responsible for the NDT of Welding Joint (VT, DPT, MPI, WFMT) as per ASME Section IX & keep Record of the Test Report.
Responsible for WQT as per WQT Specification.
Responsible for Fabrication & Installation of Steel Pipes as per Drawing.
Arranging NDT (DPT, MT, UT, RT, RBI and WFMT) as per ASME code section V.
Lead & manage multiple quality control teams in accordance to Inspection Testing Procedure (ITP), Quality plan (QP), NDT Procedure/Plan & Welding Procedure Qualification (WPS)
Engage in Coordination with different 3rd party classification societies such as LIoyd Register & Bureau Veritas to witness WPQR, WQT & Inspection Reports.
Quality Control project supervision about inspection of fabrication, welding & NDT work. To Check & Review all Inspection Reports such as NDT (RT,UT, MPI, DPT), Fabrication, welding, dimension & casting reports and forward to 3rd party classification societies or client for the acceptance.
Responsible to conduct Welding Procedure Qualification Record WPQR & Welders Qualification Tests WQT for upcoming projects in front of 3rd party classification societies.
Final inspection as per quality standards & procedures before handing over to Client. Evaluate the qualifications of Welders & QC personnel such as Welding Inspectors & NDT technicians.
Supports and participate to all internal/external audits.
Ensure that all weld, welder and welding activities are correctly specified and carried out in accordance with the relevant international codes, client specifications and applicable company welding procedures.
QMS / QHSE Implementation, management reporting and coordination. Implementation of ISO 9001, 18001, 14001 and ISO 17025 for calibration lab.
Manage and supervise the operational activities and solving technical issues. Read and understand specifications, reference code and standard.
Review and interpret contract drawings.
NAUMAN KHAN
Qatar Shutdown Inspection Supervisor
Mechanical/Welding & NDT Consultant
Page 5
04 Jan 2014-24 Mar 2014
QAQC Foundry & Machine Shop Supervisor
Descon Engineering Location: Qatar
10 Sep 2010- 30 Sep 2011 Atlas Engineering Location: Pakistan
In Atlas Engineering we prepare Honda Atlas & Suzuki Automobile parts.
I perform all stage inspection of Core Making.
Inspection of Foundry Furnace.
After shaping of material, the machining of cape & core.
Responsible to control rejection during Foundry processes.
QaQc Inspection in Fettling Shop.
Stage by stage Machine Shop Inspection.
Responsible for all casting, melting and final product according to international standard.
Responsible for the overall Quality control of all the construction activities on projects.
Responsible for all inspections at site inclusive Witnessing, Recording, Reporting the results and Resolving any problem arising.
Carried out visual inspection, welding consumable verification, dimensional check,
Performance test, welder qualification, welder training and performance monitoring.
Approve welding procedure specification (WPS/PQR), Witness and approve welder.
Welding operator performance qualification (WPQ).
Bend tests, Impact & Hardness Tests.
Review Test Certificates with respect to standards / specifications.
Arranging NDT (DPT, MT, UT, RT, RBI and WFMT) as per ASME code section V.
Responsible for the NDT of Welding Joint (VT, DPT, MPI, WFMT) as per ASME Section IX & keep Record of the Test Report.
Inspection of Pre-Heat/ PWHT as per ASME VIII Division 1 and keep record of Test Reports.
Practical experience of performing VT, DPT, MPI,WFMT
Inspection of Pre-Heat/ PWHT as per ASME VIII Division 1 and keep record of Test Reports.
Inspection of Soap Film Test (SFT) of Exchanger, and Furnace Tubes.
Inspection of Piping Fabrication as per Project Specification, Codes and Standards.
NDE Services Radiographic Testing (RT) & Ultrasonic Testing (UT)
Magnetic Particle Testing (MPT) & Dye Penetrant Testing (DPT) Multiple Sector Shutdowns Airline Experiences Freelancer Nuclear plant NDE Inspection
01 Dec 2011- 01 July 2013 Inspectests Pvt Ltd. Location: Pakistan
Airline Industry as Freelancer
Karachi Nuclear Power Plant.
Engro /Fatima Fertilizer Plant Shutdown
SNGPL Gas Plant Pakistan Shutdown
PTA LOTTE Chemical Plant Shutdown
FFBL Fertilizer Plant Shutdown
Contact this candidate