JAIME C. SANOY

***** ***** ******** *** ** Flushing New York 11367

E-mail Address: ad3g2k@r.postjobfree.com

Contact #: 929-***-****

PROFESSIONAL EXPERIENCE:

Position: Maintenance Mechanic/Refrigeration Operating Engineer (Q01)

(April 12, 2022 - Present)

Company: Pepsi Cola Bottling company New York

Maintenance Department

114-02 15th Avenue College Point, NY 11356

● Perform operation and maintenance of ammonia

Refrigeration system.

Perform Machine pre operation Set-up.

Conduct preventive maintenance of production machine and equipment.

Perform Troubleshooting and repair production machine and Equipment like

Filler, Packer, Labeller, palletiser, DE palletiser, different kind of conveyors and others.

Perform rebuilding of pumps, motors, gearbox, rollers and others.

Fabricate and modified parts if necessary

Position: Maintenance Technician

(November 1, 2021-April 11, 2022)

Company: RIU Plaza Hotel

Engineering Department

305 West 46th Street, New York, New York 10036

Perform Electrical and Mechanical House Call to support Costumer needs.

Responsible in the preparation of Hotels room, furniture’s and equipment.

Perform Corrective and Preventive maintenance for Air Handling unit, pumps

lighting system, Kitchen Equipment and others.

Perform plumbing and carpentry task if necessary

Perform painting task to make sure facilities and equipment are in good condition.

Position: Maintenance Supervisor/Production Supervisor

(October 1, 2019-July 28, 2021)

Company: (Miyasaka Polymer Philippines INC.

Molding Section-Production Department

LISPP-1 Cabuyao City Laguna Philippines

Supervises molding Section and other support activities

Responsible in the preparation of machines to be used in new products and quality control for the products.

Prepares Corrective action request and ensures implementation of appropriate corrective and preventive actions.

Instructs and update Production Engineer’s and team leaders on new procedure, process and molds and ensures implementation of quality procedures.

Verifies Mold Specification submitted for revision by team leaders.

Ensures correctness of production report such as Molding Report, MSDS and output Monitoring Board and instruct Team Leaders for necessary actions.

Report promptly any incidents or accidents like abnormal conditions of materials, Mold Machines, Equipment, abnormal behaviour of operators that affects quality of production.

Conduct training of new and other molding operators about proper/new techniques and products.

Position: Electrical Technician-Shift leader

(May 28 2017-August 18, 2019)

Company: (PEPSI Co.) MenaBev Middle East North Africa

Beverage

Maintenance Department-Power Utility Mega Plant

Jeddah, Kingdom of Saudi Arabia

Responsible for Daily Operation of Central Control System in Mega Plant Substation with 26 Megawatts Load Capacity.

Conduct Periodic inspection of all Medium Voltage switchgear, RMU,

Transformers, and Low voltage Distribution Panel as per Matrix Schedule.

Handle operation and maintenance of Access control doors,

Fire system and BMS.

Responsible for HVAC electrical troubleshooting.

Supervise the operation and maintenance of Automatic Lighting system.

Position: Sr. Utilities Technician

(November 17, 2012-May 28, 2017)

Company: (PEPSI Co.) Saudi Industrial Beverages Company

Maintenance Department-Utilities/Co2 Section

Jeddah, Kingdom of Saudi Arabia

Responsible for operation and maintenance of CO2 manufacturing plant, Including Flue gas generator, CO2 compressors, CO2 refrigeration system, and Co2 dryers.

In-charge in production of High quality CO2 as per International requirements.

Monitors operation of High Pressures Air Compressors (40 bar- Bellis and Morcon reciprocating compressor.)

Responsible for the proper functioning of Medium Air compressor

(14 Bar-Kaeser screw type)

Maintenance and repair of Low Air compressor (8.5 Bar-Kaeser screw type)

Management and handling of Medium Air compressor (14 bar-Kaeser screw type)

Excellence on troubleshooting of Steam Boiler (6000 kg/hr LAOS)

Demonstrates advanced skills in operating Chillers (75 Tons Trane chillers, 75 Tons York chiller, Hansa Grasso, Copland.

Knowledgeable for other equipment like steam heat exchanger, chilled water Heat exchanger, Air Humidifier, Air dryer

Position: Plant Mechanic

(May 2010 - June 2012)

Company: AL MANHAL WATER FACTORY CO. (NESTLE WATER)

Maintenance Department

Riyadh, Kingdom of Saudi Arabia

Assigned and perform machine modification (controlling drawings, scheduling, and update project status) and evaluation of project.

Troubleshooting and repair of machines like Filling line, Bottle washer, Case erector, Plastic Blow moulding, Injection moulding (HUSKY MACHINE HI-PET 400), Conveyors, Compressors, Chillers and other accessories used in water processing and bottling.

Conduct machine breakdown and preventive maintenance of FANUC ROBOT BOILER, COMPRESSOR, PUMPS and MOTORS, HYDRAULIC and PNEUMATIC systems.

Dismantle, move, align and set-up stationary industrial machineries and mechanical equipments, such as pumps, fans, tanks and conveyors.

Inspect and examine machineries and equipments to detect and find irregularities and malfunctions.

Handle operation of STAINLESS TIG and ARC WELDING, LATHE and MILLING operation.

Clean, lubricate and perform other routine maintenance work in machinery.

Position: Engineering Specialist 4

(May 2005 - May 2010)

Company: ROHM ELECTRONICS PHILIPPINES, INC.

PM5 Full Auto-Line- Maintenance Department

LSI 1 Division Production Maintenance Department 1

People’s Technology Complex, Carmona, Cavite Phil.

Assigned as a Team Leader on a 5-man group working on shifting schedule (12-hr rotating shift) and conducting mainly breakdown maintenance to ensure continuous production, prevent stagnant and delay outputs specifically “very urgent” deliveries; and maintain “zero” flow out of defective products by thorough investigation of quality-related defects and retrieval of possible affected products before it could reach the customer.

Skilled in operation, troubleshooting, preventive and corrective maintenance, type change, and set-up of marking, trimming, forming, simulations, and test handling machines for SMD (Surface Mounted Devices) and THD (Through Hole Devices).

Responsible for machine parts improvement and re-design, as well as designing of jigs for ease of adjustment on machine.

Assigned and perform machine parts drawing for Modification and Project.

Knowledgeable in pneumatic components such as cylinders, actuators, solenoid valves, and vacuum ejectors; mechanical parts such as cams, gears, bearings and bushings; and electrical parts such as motors, drivers, sensors, relays, and switches.

Monitors machine performance, improvement and evaluate machine efficiency and yield.

Conducts spare parts inventory.

EDUCATIONAL ATTAINMENT:

Bachelor of Science in Mechanical Engineering

Camarines Sur Polytechnic Colleges

Naga City, Philippines

Additional Skills:

Knowledgeable in operating BOILER, LATHE, MILLING, GRINDING, TIG and Capable of reading schematic diagrams, lay-outs and plan drawings.

Capable in working under time pressures and deadlines

Knowledgeable in the use of Microsoft Office Application

Knowledgeable in AutoCAD AND AUTODESCK INVENTOR operation and applications

Developed ability to produce reports and presentations to a professional standard

Proficient in assessing data and formulating solutions

Effective in time management and prioritizing tasks to achieve deadlines

Strong team working, leadership, and communication skills

Contact this candidate