Hse Manager Building Construction

CURRICULUM VITAE

OF

FIDELITO Lopez VICENTE

Grad IOSH; BSCL6IDIPOSH; IASPIDIPOSH; NIGCL123; BSN-RN

P.O. Box 32281, Doha, State of Qatar

MOBILE NO- +974-******** / EMAIL ADD: ***********@*****.*** LinkedIn Profile: Fidelito Vicente

Current Profession: HSE Lead (Construction)

Position Applied For: HSE Manager

HSE Qualification: Graduate IOSH (BSC IdipOSH)

Current Location: Doha, Qatar

OBJECTIVE: A challenging position which will a llow me to further utilize my existing skills and enable to assist the organization I will be joining with. Key SKILLS:

In-depth understanding and ability to establish pertinent procedures and required documents aligned with legislations, regulations and within the norm of OSHAS 18001, ISO 45001 and ISO 14001 standards..

Can deal with different nationalities and had experienced supervising a group of HSE personnel in the field of building construction and expansion projects in an oil and gas industries with the work force from 1000 up to 5000 personnel.

Ability to handle HSE training and seminars to all employees from senior management down the line, like the HSE Induction Training Course, Working At Height, First-Aid Training Course, Confined Space Entry, Permit To Work System Course, Scaffolding Safety Training Course, etc.

Excellent English written and verbal communication skills.

Honest, dependable, flexible and multi tasked person. And detail oriented. Project Achievement:

Able to achieved 12 Million Man-hours for the Kahramaa Power Substations Expansion Projects with 2500 project workforce and able to managed, supervise and secure client approval and allocate 50 Kahramaa approved HSE Superintendent and 65 HSE Officers.

Able to achieve 11 Million Man-hours of the total project man-hours of 21 Million for the QG JBOG Recovery and Compressor Units Projects until completion without loss time incidents. And able to manage, supervise and allocate 110 QG approved HSE Personnel including Senior HSE Officers and HSE Clerk with project workforce of 5000 for the JBOG Recovery Project.

Able to achieved 5 Million Man-hours for the QG Volatile Organic Compound Project without a loss time incident. And able to managed, supervise and allocate 33 competent and QG approved HSE Personnel for the project workforce of 1500.

Able to prepare and ensure approval of all HSE documentations from the client (Kahramaa, Qatar Rails, QG, RG, Shell, QAPCO, DEL, PDO) such as but not limited to HSE Management Plan, EPRP, PTW Procedure, CSE Procedure, Training Plan, Transport Procedure, Heat Stress Prevention Plan, Lifting Operating Procedure, Scaffolding Erection & Dismantling Procedure, Fall Protection Procedure, Fire Prevention and Protection Procedure, etc.

Able to implement client HSE rules and policy, including the governmental agency laws and regulations requirements such as the environmental permit, municipal permit and secure the client project management approval of all the company’s contractual HSE obligations prior to start up the project activities. Qualification/Education:

1. ISO 45001:2018 Principle of Occupational

Health and Safety Management System

Education Alison Level One Building, Galway

Technology Park, Parkmore, Galway, Ireland

Course Completion: November 30, 2020

2. ISO 45001:2018 Lead Auditor in Occupational

Health and Safety Management System

IRCA, United Kingdom

ICON Training Center, Doha, Qatar

Course Completion: Dec. 16, 2020

3. Occupational Safety & Health Manager

OSHA Academy

Address: GEIGLE SAFETY GROUP

15220 NW GREENBRIER PKWY STE 230

Suite 230, BEAVERTON, Oregon 97006 USA

Student No. 201307 – Registered: 02/03/2015

Course Completion: June 07, 2020

4. HACCP Level 1 & 2 Food Safety Management

Course

ROSPA Approved – Echo 3 Education, U.K.

Course Completion: April 2019 (Certificate issued) 5. EMS 1400:2015 Lead Auditor Training Course

CQI-IRCA Environmental Management System

Chicago Training Center, Doha Qatar

Course Date: 07 Aug 2018 to 11 Aug 2018

Cert. No. BTE/C514/08:0818

6. BSC Level 6 International Diploma in OSH

Course

Unique ID No. 12856

Excellence Training Center, Doha Qatar

Course Period: Feb. 2019 – Feb. 2020

Passed Exam: Diploma Issued: 14 July 2020

7. IASP Advance International Diploma in OSH

CEBTS Training Center, Al Hilal, Doha, Qatar

Course Period: June - September 11, 2017

Passed: Examination – Certificate issued

8. NEBOSH International General Certificate on

Occupational Health & Safety

Shields International – Arbrit Safety & Engineering Solution Training Center

Passed: IGC1, GC2, IGC3

9. Institution of Occupational Health and Safety – Managing Safely Course

RCS International Safety Training School, Doha

Qatar,

Course Period: June 16, 17, 18, 19-27, 2015

MS IOSH Certificate issued

Certificate No. 269920

10. Modern Safety Management Course

Safety Organization of the Philippines

Incorporated

Jose D. Regala Memorial Building, Mandaluyong

City, Philippines

Course Period: March 16,17,18,19, 20, 1989

11. Bachelor of Science in Nursing

BSN, R.N. Philippine Regulation Commission

Manila Philippines

Membership Number: 198*-*******

Membership Organization:

12. IASP Level 5 Advance Diploma in Occupational

Safety Health

International Association of Safety Professional

Graduate OSHAD-IASP – 11-Sept-2017

Membership No. 536327

13. Institute of Occupational Safety and Health

“The Heart of Health and Safety”

The Grange High field Drive Wigston

Leicestershire, LE18 1NN, UK

Membership Number: 201*-******

Membership Category: Grad IOSH, BSC IdipOSH

14. Nebosh International General Certificate on

Occupational Safety & Health

Shields International, UK

Membership Number: 201*-********

15. PHASE – Philippine Association of Safety

Engineers

Phase Doha Base Chapter - Qatar

Membership Number: 2007-0216

16. Safety Organization of the Philippines

Incorporated

SOPI, Mandaluyong City, Philippines

Membership Number: 1989 – 000255

17. Bachelor of Science in Nursing

BSN, R.N. Philippine Regulation Commission

Manila Philippines

Membership Number: 198*-*******

PROFESSIONAL EXPERIENCE:

CURRENT:

1. Name of Organization: MEISCO – GIMS Qatar

Inclusive Dates: January 05, 2019 to Presents

Projects Assignment:

MMJV BP12A-Plot1, BP12B-Plot2 Lusail Plaza Built Works Projects Position Held: HSE Lead – Plot 1 (July 2020 to Present)

Qatar Rails Major Stations (Msheireb and Education City) Position Held: HSE Manager (Jan 2019 to Dec 2019)

Accomplishment: Able to submit and closed all open incidents and secure approval of all HSE pending documentations.

Main Function:

At Qatar Rails Major Station Project:- Assigned to CCC to managed both Msheireb & Education City Major Station Projects (Qatar Rails) and closely coordinates with Qatar Rails HSE Department, RKH HSE and CCRM Authority for all required HSE documentations, HSE Directors findings, iSMS incident system reporting, updating, analysis and investigation of all incidents happens on the projects. Attend all HSE meetings with QRAILS and RKH (Weekly and Monthly HSE Meetings) and conduct a monthly HSE Audit and Weekly HSE Inspection. Reviewing and updating of all pending HSE Documentations such as Fall Protection Procedure, Fire Protection Plan, HSE Management Plan, EPRP, and Rescue Plan for Work at height, etc. At MMJV Lusail Plaza Tower Projects:- Supervise the HSE Officers at the Plot-1 BP12A Built Works Project and implement client HSE Rules, Policy and Procedures. Assist in closing out client (DAR, LREDC, LB QPM) weekly HSE audit and inspection findings. Prepares DSOR, WHSER RP/VISA: Valid till July 2023 and NOC available upon request FAST EXPERIENCE:

2. Inclusive Dates: October 05, 2015 – January 5, 2019 Name of Company / Organization: NATIONAL CONTRACTING COMPANY, LTD.

(Qatar Based – A Rezayat Saudi Group of Companies) Office Address: P.O. Box 23949 BARWA Commercial Avenue, Type 2, SAFWA Green, First Floor, Block B- 21, Industrial Area Road, DOHA, QATAR

Position Held: HSE Manager-II

Projects Involved / Assigned with:

Kahramaa Qatar Power Transmission System Expansion Projects: Construction and upgrading of 5 Packages as follows: 132/11KV lines at Birka Al-Awamer- 1,2,3,4,5 Substation; Al-Shalah South Substation; Umm Birka 2 Substation; Al-Ruwais 3 Substation; Wakhra Industrial 1 Substation; Bu Garn Substation, A-Bidda SS & Car Park, etc. Accomplishment: Able to deliver 11 completed substations to Kahramaa with 11 Million Man-hour achievement without loss time incident.

Duties and Responsibilities:

Responsible to submit input on HSE matters as directed by Saudi Based Senior Manager Health & Safety including but not limited to the development of the HSMS, RA / JSA and incentive / promotional project schemes.

Walk Through regular inspection and audit, determine compliance levels to HSMS in respect to Kahramaa Corporate.

Maintain the incident system assisting users in startups and training. Provide regular reports to relevant stake holders e.g. Senior Management / Directors / Country Manager, etc on outstanding actions.

Coordinate and collate the periodic H&S reports with HSED of Kahramaa and the company corporate HSE.

Ensure reporting, investigation and close out of corporate and operations incidents as appropriate.

Responsible to allocate HSE personnel for the 21 Kahramaa Substation all over Qatar such as in Ruwais-3, Umm Birka, Al Sahalah, Ain Hamad, Barwa Depot, Ras Abu Funtas South 1 & 2, Wakra North 1 & 2, Bin Derhem, Al Bidda, Lusail Metro, Al Waab Metro, Doha West Metro, Birkat Al Awamer No. 1, 2, 3, 4,5; Feriq Al Amir, Bu Garn, Wakra Industrial-1.

Ensure that all fabrication shop provided on all substation projects follows and strictly implement the Karhamaa HSE Requirements and the Qatar Environmental Laws for all the activities such as but not limited to: lifting operation, rigging/lifting, vehicle/equipment movement, and hot work activities. 3. Inclusive Dates: May 15, 2008 to August 31, 2015 Name of Company / Organization: QATAR ENGINEERING & CONSTRUCTION CO. W.L.L. Office Address: P.O. Box 24491, Gate No. 27, Street 48, Industrial Estate, DOHA, QATAR Position Held: Project HSE Manager

Projects involved / assigned with:

Qatar Shell Pearl GTL MTA1 2015 Turnaround Project – RLIC – Feb – May 2015

JBOG K105 / Q415/821 OFF PLOT RECOVERY PROJECT – 2011 TO 2014

JBOG K106/ Q429/821 CENTRAL COMPRESSION AREA – 2011 TO 2014 (Same as above)

Dolphin Interim Modification Project – September 2011 (Short term project)

RASGAS AKG-1 Feb 2011 Shutdown

RASGAS Train 1,2 & 5 April – July 2010 Shutdown

QP NGL-3 March 2010 Shutdown

QG EPC CVOC PHASE-1 PROJECT – 2008 – 2010

Accomplishment: Able to complete all projects without loss time incident, manage, supervise and allocate approved HSE personnel.

Duties & Responsibilities:

Develop applicable safety standards for the project, in accordance with the Companys OHSE Manual and government regulations and standards.

Ensure that all documentations pertaining to any activities performed in the client premises whether it is internal or external works were approved by the client prior to commencing works. Implements and ensure that HSE rules and policy were implemented; Permit to work secured with approved MOS, Lifting Plan, Construction Drawings, Competency of personnel, valid third Party certification of all skilled personnel. Identity risks and hazards and identify who will be affected and harm, make records of the findings, then implement measure/take action and review risk assessment if effective or not.

Coordinates the interpretation of local legislation and company policy pertinent to safety and health. Develops and maintains procedures and programs to create and reinforce awareness of safety and health, both on and off the job.

Promotes injury-free operations by ensuring that appropriate safety rules are communicated to both company and contractor employees. And ensure implementation of HSE campaigns and it is properly distributed and disseminated through a daily general safety huddle and in task specific site TBT.

Recommends or conduct competency training as necessary to promote understanding of safety and health procedures and policies by all personnel, and take action accordingly to combat hazardous practices.

Ensure implementation of client HSE programs and requirements and the environmental laws in all areas including the fabrication shop wherein most incidents may happen due to complacency and non- engagement of safety rules and policy.

Exercises authority as safety-in-charge to immediately stop any segment of work and in some cases the entire operation wherever it deems unsafe to do otherwise. 4. Inclusive Dates: May 06, 2007 – May 12, 2008

Name of Company / Organization: PETROFAC INTERNATIONAL CORPORATION Location of Work: Harweel OMAN

Project involved in: Harweel Cluster 2 Facilities Development Project – PDO - Oman Position Held Senior HSE Advisor: Assigned in 18 inch & 16 inch pipeline Main responsibilities are: to monitor the Tecfen Fabrication shop and ensure that they follow and implement PDO HSE requirements and the Oman Environmental Laws and regulations mostly on air, dust pollution daily testing and noise testing to ensure the normal units. Thorough daily rounds HSE inspection to monitor and intervene, and stop any activities which did not follow and implement the PDO rules and policy. and advice all contractors especially, TECFEN who handles the erection, lowering and welding jobs of the 18 & 16 inch pipe lines to ensure that unsafe practices, unsafe conditions observed on site were minimized. Achievement: Able to complete the projects without loss time incident and manage, supervise, intervene and corrected all safety issues and concerns on site.

5. Inclusive Dates: April 14, 2005 – April 15, 2007 Name of Company / Organization: QATAR ENGINEERING & CONSTRUCTION COMPANY W.L.L. Office Address: P.O. Box 24491, Gate No. 27, Street 48, Industrial Estate, Doha, State of Qatar Position held: PROJECT Sr. HSE Officer

Projects involved in/assigned with: QAPCO Furnace Expansion and Polyethylene Unit Shutdown Projects; QAFCO Urea Melamine Project; QP Halul CCR Development Project and at Qcon HQ HSE tender/bid section.

Make daily rounds HSE inspection and audit of all areas especially the fabrication shop wherein all incident may happen due to complacency and non-compliance of HSE rules and policy formulated by Qcon and the client.

Ensure that all HSE documentation and related method statement/work procedures were approved by the client prior to commencing any activities. Ensure that all project department manager and staffs follows and implement permit to work system and procedure of the client. 6. Inclusive Dates: April 01, 2003 – March 15, 2004 Name of Company / Organization: ABU DHABI GENERAL MAINTENANCE & PETROLEUM SERVICES CO. DRILLING & WORKOVER COMPANY

Location of Work: Abu Dhabi, UAE/ Damascus, Syria

Position Held: HSE ADVISOR (Onshore/Offshore) – Conduct fire mock evacuation drills, H2S drills and medical rescue drills every week. Monitor and conduct site safety inspection and submit daily HSE report, weekly and monthly KPI report. Coordinates with client and external agencies pertaining to country and area HSE requirement, regulation and policy to be followed and implement on site. 7. Inclusive Dates: September 20, 1999 – July 31, 2000 Name of Company / Organization: SAUDI ARABIAN PARSONS CO. LTD. Location of Work: Jubail, KSA, PETROCHEMYA OLEFINS III PROJECT, JUBAIL INDUSTRIAL COMPLEX

Position Held: HSE COORDINATOR – Assist the HSE Superintendent in monitoring and coordinating with all contractors on site and closely monitor activities, giving advice and share safety observation for early rectification. Prepare and submit Daily, Weekly and Monthly reports. Chaired and presided contractors HSE leadership coordination meeting and discuss present, past and future HSE targets for improvements and effective implementation.

8. Inclusive Dates: Feb 1990 – Feb 1994

Name of Company / Organization: MOHD AL-MOJIL GROUP Location of Work: Dammam, KSA, ARAMCO

Project Involved with: VARIOUS SAUDI ARAMCO (ON-SHORE/OFFSHORE) Position Held: SAFETY OFFICER - Monitor and conduct site safety inspection and submit daily HSE report, weekly and monthly KPI report. Coordinates with client and external agencies pertaining to country and area HSE requirement, regulation and policy to be follow and implement on site. PERSONAL PROFILE:

Name : FIDELITO LOPEZ VICENTE

Nationality : Filipino

Religion : Christian

Philippines Address : Block 2, Lot 20, Green Heights Subdiv, Antipolo City, Rizal, Philippines

Place of Work/Residency : Doha, State of Qatar

Qatar Resident Address : P.O. Box No. 32281, Flat No. 15, Fourth Floor, Bldg No. 41, Al Khudri, St. 810, Zone 25, Mansoura, Doha, State of Qatar

Fathers Name : Nicolas Ignacio Vicente (Deceased)

Mothers Name : Maria Florida Lopez Vicente (Deceased) Number of Children : Two (1 boy and 1 girl)

Name of Spouse : GRACE HERNANDO VICENTE

Occupation of Spouse : Sr. Administration Supervisor – EMERSON, DOHA QATAR Passport Expiry / Number : 23 March 2031 / P 6553684 B Resident Permit / Visa : 258********

RP/Visa Acquired : Doha Qatar

RP/Visa Expiry : 12 July 2023

Qatar Driving License : License No. 258********

Driving License Expiry : 2024-01-19

PERSONAL REFERENCES:

1. William Joe Hobbs - Safety Supervisor- Conoco Philipps USA Former Manager, Risk & Safety Management, Qatargas (RLIC) Email Add - ***.*****@**************.***

Mobile No.: - 001-405-***-**** (USA)

2. Englebert DC Tungol - HSE Manager, QCON, Qatar

Email Add - *.******@****.***.**

Mobile No.: - +974-********

3. Benjamin Caruz - QA / QC Manager / Lead Auditor Email Add - ********.*****@****.***.**

Mobile No.: - +974-********

4. I. Mathivanan - Manager, Projects – NCC

Email Add - *.*****@******-*****.***

Mobile No.: - +974-********

5. John Francis - HSE Manager – Supreme Committee Delivery & Legacy Email Add - *******@*****.***

Mobile No.: - +974-********

This is to certify that the above details stated are true and correct to the best of my knowledge and belief. Signed: FIDELITO LOPEZ VICENTE

Contact this candidate