JOSEPH CARRY

**** ******** ***

Bensalem, Pennsylvania,

19020

267-***-****

ad3dpu@r.postjobfree.com

EXPERIENCE WORK:

NVR Building Products, Delco New Jersey

January, 2018-present

Builder/Carpenter/Mill Work

Read blueprints, drawings, or written specifications, use of glue, nails, bolts, screws, and other fasteners, trim, smooth, and shape surfaces and using hand tools to attain specified shapes using hand tools, jigs, selected wooden stook, determine layouts and mark layouts o oars on stock, using precision equipment such as scribes, squares, and protractors Construct houses eyebrow dormers, canopies, interior and exterior columns, plans, lay out, and draw outlines of units, sectional patters, full size house construction wall framing, stairs, interior doors. Fork Lift Certified, overhead crane experience.

JNJ/COMPASS RETAIL DISPLAY, PHILADELPHIA, PA

Builder/Prototype Assembly, Mar 2013 – January, 2018 Read blueprints, drawings, or written specifications, and consult with designers to determine sizes and shapes of patterns and required machine setups.

Fit, fasten, and assemble wood parts together to form patterns, models, or sections, using glue, nails, dowels, bolts, screws, and other fasteners.

Trim, smooth, and shape surfaces, and plane, shave, file, scrape, and sand models to attain specified shapes, using hand tools. Select wooden stock, determine layouts, and mark layouts of parts on stock, using precision equipment such as scribers, squares, and protractors.

Construct wooden models, patterns, templates, full scale mock-ups, and molds for parts of products and production tools. Plan, lay out, and draw outlines of units, sectional patterns, or full- scale mock-ups of products.

Maintain pattern records for

reference.

Finish patterns or models with protective or decorative coatings such as shellac, lacquer, or wax, and laminate. Produce or assemble components of articles, such as store fixtures, office equipment, cabinets, or high-grade furniture. Verify dimensions or check the quality or fit of pieces to ensure adherence to specifications. Set up or operate machines, including power saws, jointers, mortisers, tenoners, molders, or shapers, to cut,

mold, or shape woodstock or wood substitutes. Measure and mark dimensions of parts on paper or lumber stock prior to cutting, following blueprints, to ensure a tight fit and quality product. Reinforce joints with nails or other fasteners to prepare articles for finishing. Attach parts or subassemblies together to form completed units, using glue, dowels, nails, screws, or clamps. Establish the specifications of articles to be constructed or repaired or plan the methods or operations for shaping or assembling parts, based on blueprints, drawings, diagrams, or oral or written instructions.

Cut timber to the right size and shape and trim parts of joints to ensure a snug fit, using hand tools, such as planes, chisels, or wood files.

Match materials for color, grain, or texture, giving attention to knots or other features of the wood.

Trim, sand, or scrape surfaces or joints to prepare articles for finishing.

Bore holes for insertion of screws or dowels, by hand or using boring machines. Program computers to operate machinery. Perform final touch-ups with sandpaper or steel wool. Install hardware, such as hinges, handles, catches, or drawer pulls, using hand tools. Repair or alter wooden furniture, cabinetry, fixtures, paneling, or other pieces. Apply Masonite, formica, or vinyl surfacing materials.

Dip, brush, or spray assembled articles with protective or decorative finishes, such as stain, varnish, paint, or lacquer. LITZ MECHANICAL, BENSALEM, PA

General Laborer, Sep 2011 - Jan 2013

Test pipe or tubing joints or connections for leaks, using pressure gauge or soap- and-water solution. Join pipes or tubing to equipment and to fuel, water, or refrigerant source, to form complete circuit.

Reassemble and test equipment following repairs.

Repair or replace defective equipment,

components, or wiring.

Lay out and connect electrical wiring between controls and equipment, according to wiring diagrams, using electrician's hand tools. Install, connect, and adjust thermostats, humidistats and timers, using hand tools. Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area.

Inspect and test systems to verify system compliance with plans and specifications or to detect and locate malfunctions. Adjust system controls to setting recommended by manufacturer to balance system, using hand tools.

Install auxiliary components to heating-cooling equipment, such as expansion and discharge valves, air ducts, pipes, blowers, dampers, flues and stokers, following blueprints.

Recommend, develop, or perform preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters. Cut or drill holes in floors, walls, or roof to install equipment, using power saws or drills.

Assemble, position and mount heating or cooling equipment, following blueprints.

Record and report all faults, deficiencies, and other unusual occurrences, as

well as the time and materials expended on work orders. Discuss heating-cooling system malfunctions with users to isolate problems or to verify that malfunctions have been corrected. Study blueprints, design specifications, and manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components. Measure, cut, thread, or bend pipe or tubing, using pipe fitter's tools.

Fabricate, assemble, or install duct work or chassis parts, using portable metal- working tools or welding equipment. Generate work orders that address deficiencies in need of correction. Assist with other work in coordination with repair and maintenance teams.

Wrap pipes in insulation, securing it in place with cement or wire bands.

Install and test automatic, programmable, or wireless thermostats in residential or commercial buildings to minimize energy usage for heating or cooling.

Install dehumidifiers or related equipment for spaces that require cool, dry air to operate efficiently, such as computer rooms. ANDALUSIA FOUNDATION, BENSALEM, PA

Grounds and Building Maintenance, Mar 1997 - Dec 2009 Operate vehicles and powered equipment, such as mowers, tractors, twin-axle vehicles, snow blowers, chain saws, electric clippers, sod cutters, and pruning saws. Mow or edge lawns, using power mowers or edgers. Shovel snow from walks, driveways, or parking lots and spread salt in those areas. Care for established lawns by mulching, aerating, weeding, grubbing, removing thatch, or trimming or edging around flower beds, walks, or walls.

Use hand tools, such as shovels, rakes, pruning saws, saws, hedge or brush trimmers, or axes.

Prune or trim trees, shrubs, or hedges, using shears, pruners, or chain saws,

Gather and remove litter.

Maintain or repair tools, equipment, or structures, such as buildings, greenhouses, fences, or benches, using hand or power tools.

Mix and spray or spread fertilizers, herbicides, or insecticides onto grass, shrubs, or trees, using hand or automatic sprayers or spreaders.

Provide proper upkeep of sidewalks, driveways, parking lots, fountains, planters, burial sites, or other grounds features. Water lawns, trees, or plants, using portable sprinkler systems, hoses, or watering

cans. Trim or pick flowers and clean flower beds.

.

#

Rake, mulch, and compost leaves.

Follow planned landscaping designs to determine where to lay sod, sow grass, or plant flowers or foliage.

Plant seeds, bulbs, foliage, flowering plants, grass, ground covers, trees, or shrubs and apply mulch for protection, using gardening tools.

Decorate gardens with stones or plants.

Maintain irrigation systems, including winterizing the systems and starting them up in spring.

Use irrigation methods to adjust the amount of water consumption and to prevent

waste. Haul or spread topsoil or spread straw over seeded soil to hold soil in place.

Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.

Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.

Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.

Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or

equipment.

Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists. Clean or lubricate shafts, bearings, gears, or other parts of machinery.

Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges. Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.

Record type and cost of maintenance or repair work. Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms.

Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.

Provide grounds keeping services, such as landscaping and snow removal.

Perform general cleaning of buildings or properties. Fabricate or repair counters, benches, partitions, or other wooden structures, such as sheds or outbuildings.

Lay brick to repair or maintain buildings, walls, arches, or other structures.

Perform routine maintenance on boilers, such as replacing burners or hoses, installing replacement parts, or reinforcing structural weaknesses to ensure optimal boiler efficiency.

GEORGE SKELTON CARPENTRY, BENSALEM, PA

Carpenter, Jan 1987 - Mar 1997

Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.

Shape or cut materials to specified measurements, using hand tools, machines, or

power saws.

Follow established safety rules and regulations and maintain a safe and clean

environment.

Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.

Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools. Verify trueness of structure, using plumb bob and level. Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools. Assemble and fasten materials to make frameworks or props, using hand tools and

wood screws, nails, dowel pins, or glue.

Remove damaged or defective parts or sections of structures and repair or replace, using hand tools. Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.

Erect scaffolding or ladders for assembling structures above ground level.

Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.

Fill cracks or other defects in plaster or plasterboard and sand patch, using patching plaster, trowel, and sanding tool.

Select and order lumber or other required materials. Cover subfloors with building paper to keep out moisture and lay hardwood,

parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.

Work with or remove hazardous material.

Perform minor plumbing, welding, or concrete mixing work. EDUCATION BENSALEM HIGH SCHOOL, BENSALEM, PA

High School Diploma, Jun 1985

ADDITIONAL Skills: Excellent Communication skills, the ability to delegate, positive report with co workers, excellent written skills, positive work ethics.

Contact this candidate