Mr. Tu Tran (****_**), Canada citizen with USA and CA SSN #

C: 937-***-****. Email: ad3cfj@r.postjobfree.com

Objective: Looking for hardware Electrical Electronics engineering roles or related fields.

Summary:

1)Electrical electronics design fields: Designed electronics circuits involving analog, digital, microcontroller, IC components, schematic captures, PCB layout, PCB, component library, ORCAD Cadence Allegro V17.4 & V22.1, and Altium V22. Designed low and high power up to 750 Vac and 5 KV dc electrical controlled circuits involving 3phase, 1 phase AC, PLC controllers, AC and DC motor drivers, relays, transformers, electrical panels, wiring harnesses, AutoCAD etc.. (#2-charging-capacitor, #3-smart tech, #7, #11, #12, #16, # 17 & electronic alarm, #18, and thesis and projects).

2)Test engineering Fields: Verified hardware, firmware, software of SUT (system under test) under environmental and EMC/EMI tests to pass all the requirements on the powers, IO powers, signals, CAN, Ethernets involving using simulation software, multi meters, Oscilloscope, and many other hardware tools (#1, #2, #4, #6, #8, #10, #13).

3)EMC design and analysis: EMC Designs and analysis for the Space satellites (#9).

4)Technologist and automation control technician: hand on troubleshooting, building, integrating, modifying PLC machines, wiring, fixing failure machines or electronics systems to make them working again (#3, #14, #17, #18).

5)Free time: I am working on C, C++, Python, RF designs, Ms visual studio 2022, Python 3.11.1, PyCharm 2022.3 compilers, NI LabView 2022, ORCAD cadence allegro V17.4 & V22.1, Altium designer V.22, MatLab 2022, Studio 5000 logic designer.

Project-Success: Automation control machines, alarm system, FSK modem, Light controllers, frequency shifter, SVFP test station, and Harmonic Ratio analyzer.

Education:

Bachelor Electrical Electronics Engineer (BEEE) in Major Electronics Communication. Toronto Metropolitan University (Ryerson), ON, Canada 1993.

Thesis and Projects: Designed and developed the full duplex FSK MODEM, and electrical light controller, and frequency shifter using Microcontroller MC6809, ADC/DAC, MC6502, RS232, SCR, OPAM, Frequency Oscillators, PCB and assembly language. Designed power supplies AC to DC and DC to AC up to 1 KW.

Others: Laser, communication protocol, C, VB6, assembly language.

Government Security clearances:

CGP and ITAR authorized in 2015, level 2 and level 3 of NATO in 2010, background and security clearance from 2004 up to today.

Work History:

1.Test Engineer. David inc. (Framatome). VA. USA (01/2023 - 05/2023).

Performed functional tests on prototype analog/digital electronics projects and create test procedures. Used Altium V.22.

2.Test/Firmware Engineer. LTTS inc. (GE Aviation-Rockwell Automation). OH. USA (06/2021 - 12/2022).

Created visual inspection on Excel sheet to verify electronics systems for testing. Tested on analog / digital Hybrid projects, CCA, Gate drive power distribution, gate drive stack up, interface cards, fan control, EMI interface. Designed some circuits to perform 5KVdc Capacitor charging and discharging, Oscilloscopes, and up to high 5KVdc powers test. Created harness on Xcel sheets and built harness for system under tests and selected harness parts on Digit key or other suppliers.

Firmware development tests on powers and IO powers, Ethernet 1GHz, Studio 5000 logic designer, Rslinx Classic, Confluence, Jira, Jama.

Duties covered environmental and functional tests including extreme temperatures, humidity, vibrations, shocks, altitudes tests.

EMC/EMI tests covered ESD/EMC emission, electrostatic discharge, radiated RF immunity, fast transient burst, conducted surge, conducted RF immunity, magnetic field immunity, conducted emissions, voltage dips short interruptions and voltage variations, conducted emission, radiated emissions.

3.Electronics Consultant. Transoft & Smart Tech Inc. Toronto, ON. Canada (12/2015 – 06/2021).

Self-worked on Python, PyCharm 2020.1, Xilinx Vivado 2020.2, Cadence Allegro Orcad V17.4 &V22.1, LabView V_2019, Ms Visual Studio 2019, RF designs while doing short term part time on two electrical PLC (AB) control projects successfully for another small private firm from electrical wirings, ECAD 2015, HMI, SCADA, communication LAN interface, electrical control designs, panel design and build completely by myself, and repaired and tested GE Avionic electronics military aircraft control generators and created test procedures using MIL_STD 461E for government of defense projects (DOD) aircraft and navy. Came back to work at Transoft Inc. couple times for short term works on the weekends.

4.Test Engineer. Design Group inc. (Safran E Canada). ON. Canada (06/2015 - 10/2015).

Developed software test cases through C language source code for the Global Aircraft 78K. Used IBM Rational DOORS Ver.9.3, Beyond Compare 2, and DO 178B.

5.Software Assistant Transoft Inc. Toronto, ON. Canada (11/2013 – 05/2015).

General help on Data Base software.

6.Test Engineer. Noramtec Inc. (Bombardier Aerospace). QC. Canada (01/2013 – 08/2013).

Performed test procedures and verified the power systems on the CS-series aircraft power systems, RATs, CDCs, TRUs, GCUs, SSPC, APU, SPDS, Avionics, Hydraulic pumps and problem analysis and correct actions.

7.Electrical Engineer. Tyne Engineering Inc. Toronto, ON. Canada (01/2012 - 01/2013).

Developed software PLC S7-400, HMI, SCADA, communication LAN interface for the loop control development test (LCDT) in Atomic Energy.

Electrical AutoCAD 2010 to upgrade electrical designs.

8.Test Engineer. Aerotek inc. (GE Transportation). Erie, PA. USA (06/2011 - 10/2011).

Tested and validated IBASED solutions software on the QNX systems and verified the incident socket (9018), monitor parameter socket (9020), and TO sockets (9028). Simulation software such as CMU, CCA, on/off board communication interfaces, Putty, Wireshark.

9.EMC Analysis Engineer. MDA inc. Montreal, QC. Canada (01/2010 – 01/2011).

Researched and developed EMC worst case analysis document to design the space payload AM5 & AM6 satellites systems which are used in space for government of defense (DOD).

Used C in Excel to create EMC calculator from EMC equations to find and calculating the high intensity radiated (HIRF) near and far fields, induced voltages and induced currents, rejecting voltages and rejecting currents, distance displacements, shielding, grounding, and twisted wires in common mode and differential mode, susceptibility to the victims up to 80GH for these space payload satellite systems.

Performed analysis the sun radiation, high Intensity Radiated Fields (HIRF), shielding, grounding, twisted wires, material, noises, voltage drop, etc. covered all EMI, ESD and applied NASA-STD and MIL-STD on harnesses.

10.Test Engineer. Aerotek inc. (GE Transportation). Erie, PA. USA (11/2008 – 10/2009).

Tested on Dynamic Brake System for locomotive train, including LAN, RS232, CANBUS, analog, digital, Ethernet, Microcontroller, BIOS, and FPGA.

11.Electronics engineer. Noramtec Inc. (BE Aerospace Inc). Kansas, KS. USA. (09/2007 – 10/2008).

First project to design Boeing 777 PSU harness

Second project to analyze and redesign electronic circuits and verified results base on the customer graphic curves for the Oxygen system for aircraft. Current limit circuit and lightning strike protection circuit designs.

E_CAD ORCAD Cadence 16.3.

Microprocessor M306NA, can-bus AMIS30660, TD62083AF, VND830.

EMC, EMI, ESD, lightning circuit protection tests.

Research and buy components on Digikey and Newark.

12.Wiring Designer. Noramtec inc. (Hamilton Sundstrand). Rockford, IL. USA (10/2006 – 08/2007).

Wiring designs Airplane Power System Integration Facility for newly developing Boeing 787, CANBUS, shielded cables, conduits, bundle wiring, connectors.

ECAD, MS Visio, Excel, Engineering team Center, Change drawing request (CDR).

13.Test Engineer. Aversan inc. (Honeywell). Mississauga, On. Canada (10/2004 – 10/2005).

Verified and tested on the Airbus A380 Electrical Power Distribution (SEPDS) under environment using simulation UNITY. AFDX communication, short circuit, Gateway, ground fault interrupt (GFI), DOORS, MS-tools, digital oscilloscope.

14.Electronics Technologist. Cable Serve inc. Toronto, ON. Canada (11/2003 – 10/2004).

Troubleshoot RF amplifier 50MHz – 860MHz BW for high speed internet systems, and CATV.

15.Electrical Contractor. Self Inc. Toronto, ON. Canada (11/2001 – 10/2003).

Worked as Electrical home design contractor for private resident homes.

16.Electrical engineer. Battenfeld Gloucester Engineering inc. Gloucester, MA. USA (01/1999 – 09/2001).

Designed high power distribution electrical circuits for automation control machines up to 15000 KW, 2KA, 700VAC. DC / AC 3_ph / 1_ph 115Vac - 700Vac power lines diagrams, panel layouts, harness diagrams and BOM for Blown film, bag machines.

Electrical AutoCAD 14-2000.

Servo drive or AC/DC SVFP frequencies motor drivers (1/4Hp, 5Hp, 100Hp, 500Hp, and 1000Hp).

NFPA79, CSA and inter log safety.

Programmed PID, feedback control, open/close loop systems servo drives.

Electrical troubleshooting.

Reviewed and approved engineering designs and documents.

Developed and built machine-testing systems to test motors and motor drivers

17.Automation Control Technician. Polytainers Inc. Toronto, On. Canada (10/1994 – 01/1999).

Electrical troubleshooting, program PLC on the PLC controlled printing machines. Redesigned electrical systems, build electrical panel, wiring to upgrade printing machines. PLC such as AB502, Siemens (S5, S7), Texas instrument (TI 205/305/505), Fanuc GE, Mitsubishi FX, human machine interface (HMI), AFE touch screen, and communication protocol (RS 232/422/485). Omron, RSLogix500X, PLC5, APS SLC500, Simatic- S5/S7, Directsoft, Melsec-f-Medoc.

AC/DC motors and servomotor drivers, AC / DC power line up to 20KV.

Upgraded old printing machines, VANDAM / POLYTYPE, with new electrical systems, new PLC, HMI, SCADA, Ethernet interfaces, touch screen to improve quality, quantity, safety, and reduce maintain cost.

Designed and developed electronic alarm system successfully.

18.Electronics Technologist. Instrumentation Inc. Toronto, ON. Canada (10/1993 – 10/1994).

ORCAD Electronics Captures, PCB, BOM on the Harmonic Ratio Analyzer project. Power supply, phase locked oscillator (PLO), phase locked loop (PLL), voltage-controlled oscillator (VCO), log ratio converter (LRC), coherent detector, switching detector, low pass filter, opt coupler isolated (TTL), communication protocol (RS_232).

Contact this candidate