P

Troy Pedersen

402-***-****

ad349g@r.postjobfree.com

Omaha,Ne 68132

SUMMARY

I believe I'm highly educated in welding field, quality is my integrity along with safety minded, I'm also mechanical as being a mechanic, these two skills plus several others for most of my life, I wanted to learn as many life skills as I could, including the use of tools both hand and air, there are many other skills i have as well,

SKILLS

Stick welding, submerged arc, certified, cutting torches, air arc gouging, iorn worker, magnetic drills, ram, overhead crane, jib crane, mig welding, use of jigs, press operator, stainless steel welding, plasma cutting, grinders, reading blueprints, fabrication, use of hand tools, impact tools, working at various heights, pipe welding steel and aluminum, operator of skidsteer loaders, forklifts, saws, torque wrenches, some tig experience

EXPERIENCE

Mechanic/Welder

Gretna, NE

Carleton Transport Service/ Oct 2020 to Sep 2021

I was a semi bulk tank trailer mechanic, I did annual trailer inspections, disassemble axles, inspect axle bearings replace as needed, these were both oil or grease bearings, reassemble and torque to specs, check and inspect brakes replace as needed, including S Cams and slake adjusters, brake cans, all brake hoses for wear, brake valves, and ABS systems for proper use, brake drums for wear replace as needed, inspect all valves and tee's on product transfer piping, replace as needed including bottom drop doors and gaskets, check and inspect domelids, for proper seal, replace gaskets as needed, also insure collars were flat for seal, if not I filed them flat also a including hinges for proper movement, clamp downs on domelids, adjust as needed or replace if they became none adjustable, inspect all piping for wear, this is an airration system forced air thur valving to pressurize tank, using a vibration system and air to force product out of valving to the product release piping, these were Aluminum trailers, welding included rebuilding piping that was damaged in accidents, wear, also including cracks in frame structures, I also did tire work, including dismounting and remounting, also checking wheels or rims for damage, I also did PM services on our truck fleet, oil changes and grease and inspect,

Welder/Robotic Welder Operator

Lincoln, NE

Kawasaki / Jun 2020 to Sep 2020

Programmed and ran automated robotic machinery to achieve MIG welds for cell production and fixtures and jigs.including finish welding in places where robot wasnt programmed, was trained on several different robots

Mechanic/Welder Assistant

Omaha, NE

Hatcher Mobile Services/ Dec 2017 to Feb 2018

Performed mechanics on semi trucks, including pulling of engine, and replacing engine, including of R&R of transmission and driveline, brakes, helped other mechanics R&R clutches, oil changes and PM services, did random welding of broken parts, some tire work

Mechanic/Welder

Louisville, NE

Transwood Carriers Inc./ Mar 2011 to Sep 2017

Work on semi bulk trailers in fleet, inspections of bearings, brake systems, trailer valving, vibration systems, domlids, piping, including replacement from steel to aluminum fabrication of,welding all joints to hold pressure of up to 20 psi, also frame sections of up to 3' on rear of trailers, cut off and resection, fabrication of pieces and weld together structurally, tire work, also worked on trucks replacement of worn parts, PM services, tires brakes including disc brakes, also installation of blowers for trailer air systems including fabrication of piping, installation of PTO systems, wiring switches, lights this was on a fleet of 40 to 60 pieces of equipment 40 plus trucks, 60 plus trailers, plus any owner ops they hired on

OTR Commercial Truck Driver

Sioux City, IA

Several different jobs/ Apr 1994 to Dec 2010

Dropped off deliveries within scheduled timeframes.

Delivered products and freight to customers both locally and long distance.

Maintained accurate driving records to meet federal regulations and laws.

Inspected the vehicle daily to make sure all parts were properly functioning.

Interacted with company dispatchers to alert of issues or delays.

Charted upcoming routes using both GPS technology and maps.

Maintained safe driving habits to protect property and general public on roadways.

Secured freight during breaks and stops to avoid theft.

Maintained accurate records of correspondence with customers and freight recipients.

Demonstrated safe driving by observing road rules, exercising caution in unfamiliar areas and maintaining vehicle control.

Contacted manager with critical issues to ensure effective problem-solving.

Loaded, balanced and secured product to safely transport goods.

Planned efficient routes and adjusted strategies based on current weather and traffic information.

Updated logs with timely and accurate information meet internal requirements and DOT recordkeeping demands.

Handled loading and unloading of goods and freight from tractor-trailers, heavy-duty trucks and flatbed vehicles.

Established relationships with customers through use of interpersonal, active listening and inquiry response skills.

Completed transfers at hubs and final destinations to keep routes on schedule.

Conducted vehicle inspections before and after every trip and performed minor repairs to keep truck functional.

Managed proper transportation of dangerous goods with no incidents.

Notified customers of potential late deliveries, which resulted in [Number]% decrease in calls to company support line. This included refrigeration, dry van, and last 12years as flatbed, stepdeck, RGN trailers, oversized loads as tall as 14ft 3 in, and as wide as 14'6" also long loads up to 100ft, over weight loads as much as 140,000lbs, all kinds of equipment, crane pieces, concrete structures, some loads tarped,

Erection of Hog Confinements

Anita, IA

Sands / Dec 1993 to Apr 1994

Was on a crew that built hog confinements, from concrete floors to wood structures, installing of curtains on times, installing watering and feeding systems on timers, drainage systems for animal waste products to lagoon, operate of equipment skid steer loaders, forklifts, D-5 dozer, nail and screw guns, saws, hand tools

Jig Welder/Press Operator

RedOak, IA

Douglas&Lomision/ Nov 1989 to Dec 1993

Jig welding with mig, for pieces for robotics, was mainly child resistant seat backs, also welded seat adjusters, I also operated presses, to stamp out parts, was trained on just about all presses in plant, these jobs included quality control and number of product counted, I held records of production both on presses and jig welding in plant

Welder

RedOak, IA

Douglas&Lomision/ Dec 1988 to Nov 1989

Work with a small crew from out of state, we disassembled and rebuilt a auto dip system for parts, including reading blueprints, fabrication from prints, this was all stainless steel mig welding, also built the auto dip system that was conveyor operated and lowered and raised parts in tanks of solutions then painted them, after we were done building this system I was the operator of this piece of equipment and got my start at D&L

Welder

Omaha, NE

Furehauf liquid bulk ytank/ Aug 1988 to Nov 1988

Learned to weld Aluminum and stainless steel, the use of plasma cutting, and also tig welding of aluminum building tee's for valving, welding aluminum sheets to produce a tank trailer, also mig welding building rear suspension for axles of trailer

Structural Welder

Atlantic, IA

Vinition Iorn Works/ Apr 1985 to Sep 1988

Was certified stickweleder in vertical in horizontal position unlimited thickness, also in submerged arc wire welding, weld pieces together on structural steel beams, welding on plates and brackets as blueprints called for, welding frame pieces and base plates together, quality control checked each weld for proper weld quality and weld size, all welds were UV tested for flaws, also built beams as large as 14" flange and 4' web, heated steel until moisture was gone and a grease pen would write, these beams could be 110' long, use of over head crane, iorn worker for punching holes, magnetic drills, a ram for straightening warped beams, structural steel included I beams, round pipe, square tube, use of stick arc welding, cutting torch, air arc gouging, grinders, keeping work areas clean on a production time base per piece or pieces

EDUCATION AND TRAINING

High School Diploma

Anita Community High May 1981

Anita, IA

Took mechanics an welding 1and2

Contact this candidate