ALDO DeCOLLIBUS

SENIOR PIPING DESIGNER

*** ******* *****, ********, **. 22504

PH 804-***-****, Cell 804-***-****

ad32iy@r.postjobfree.com

COMPUTER LITERACY

Intergraph PDS (Classroom experience only).

1-Creating Piping Models - certificate

2-Creating Equipment Models - certificate

3-Extracting Orthographic Drawings - certificate

CadWorx 3D (Classroom experience only)

2D Microstation 95, J, V8, & V8XM. 14 years

3D Microstation Plantspace. (classroom experience only)

2D AutoCAD 14 thru 2010, 11 years

SUMMARY OF EXPERIENCE

A total of 47 years experience in the design and technical fields having held positions in the following industries and a description of duties.

NUCLEAR INDUSTRY – Providing engineering support (Plant Design) for the DOE on going plant production activities and processing of nuclear materials.

POWER INDUSTRY – Nuclear and Fossil, 10 yrs. 1 mo. Piping Designer / Field Engineer using Intergraph & drawing board.

PHARMACEUTICAL INDUSTRY 5 yrs. 6 mo. Piping Designer / Field Engineer using Intergraph / Microstation.

ALUMINUM/ALUMINA 1 yr. 4 mo. Mechanical and piping conceptual design.

MANUFACTURING 3 yrs. 6 mo. Electro Mechanical design and drafting. Industrial blower & compressor skid design & sales.

WATER TREATMENT & ENVIRONMENTAL INDUSTRY 5 mo. As a piping designer using Autocad 2000.

TOBACCO INDUSTRY 1 yr. 9 mo. Piping Designer using Microstation 95 & J.

COMMERCIAL & LIGHT INDUSTRY 1 year. Mechanical Designer, Civil Drafter using Autocad - 14.

CHEMICAL INDUSTRY 8 mo. Piping Designer / Field Engineer using Microstation 5.0.

FOOD INDUSTRY 8 mo. Piping Designer using Microstation 5.0.

STEEL INDUSTRY 5 mo. Mechanical Designer using Autocad - 14.

SEMI-CONDUCTOR INDUSTRY - 4 mo. Process Piping Designer using Autocad 2005.

PULP & PAPER INDUSTRY- 10 years. Lead designer using Microstation V8 & Autocad.

NAVAL 4 yrs. as an operating engineer/tech for a 600 lb. steam propulsion plant. (boiler tech & machinist mate)

Design duties include physical layout of process & power pipe from P&IDS, equipment arrangements, stress and fabrication isometrics, spool drawings, composite drawings, location of pipe supports & detail drawings of same. Generation of P&IDs and one line diagrams. Layout of material handling equipment (conveyor belt & pneumatic systems). Designed double containment piping systems both high temp./press. & chemical transfer. Some experience with conduit & cable tray routing with supports. Drafting of land development maps (topo's, lot staking, underground utilities).

Field duties in new construction & existing plants include verification of piping systems or processes, pipe supports, & instrumentation loops, equipment location. Generated as built field sketches to facilitate retro-fit projects or plant expansions. Coordinated needed work completion of piping systems prior to pre-operational testing (start up) & client turnover.

Manufacturing design duties include general arrangements, sheet metal fabrication drawings for metal clad electrical control cabinets, instrument panels, electrical schematics, wiring diagrams, & mechanical parts for emergency diesel generator sets.

Sales/application duties entailed sizing of blower & compressor packages from client specifications and generating sales quotations for competitive bid. Source out through manufacturer representatives, price and availability of required components. Maintain customer accounts & supplier files, perform follow up sales calls on submitted quotes, and worked industry trade shows.

Military duty entailed 4 years of naval experience as a steam propulsion operating engineer. (Machinist Mate 3rd class).

EDUCATION

State University of New York at Farmingdale, Curriculum-Mechanical Tech

Intergraph/Microstation 3D, System Administration Huntsville, Al.

AutoCAD R11 Penn State University, Wilkes Barre Campus

EMPLOYMENT HISTORY

August 2018 to present

Savannah River Nuclear Solutions, Aiken, S.C.

Position: Plant Design Specialist

Projects: Responsible for the relocation and design layout of a glass component fabrication shop for the Savannah River National Laboratory, (SRNL). Presently working in the tritium area providing physical design support for existing production facilities.

Presently I have an “L” clearance.

January 7, 2013 to October 26, 2015 (contract assignment)

Ford Bacon & Davis LLC, West Monroe, La.

Position: Lead Piping Designer for International Paper's Bogalusa Mill.

Projects: Responsible for the upgrade and the mill wide expansion of the natural gas

distribution system serving two power boilers, two recovery boilers and a lime kiln. Further

piping responsibility included the internal conversion of aforementioned boilers from burning fuel oil to natural gas. Other recovery boiler work, rebuilding the Green Liquor Density system.

March 3, 2010 to October 2012 (contract assignment)

KBR/BE&K Engineering of North Carolina

Position: Sr. Piping Designer. Location: Morrisville, N.C.

Projects: Verso Paper - TMP Heat Recovery for Power Plant Water. Re-capture of heat from spent process steam to boiler condensate system. - Digester Down Flow Cooking Piping Modification, process upgrade. - Retention Aid Installation, process upgrade.

International Paper - Oxy Trac Project, installation of a new Oxygen Delignification 1st Stage Reactor and Mixer Piping. - Brown Stock Primary and Secondary Screens Project, major re-work and replacement of brown stock screens and pumps.

May 27, 2008 to August 29, 2008 (contract assignment)

Bechtel National Inc.

Position: Sr. Piping Designer. Location: Frederick, Maryland.

Project: WTP Project in Richland, Washington. (nuclear waste facility).

Evaluated quality documents and piping isometrics prior to submittal to construction.

June 28, 2007 to May 18, 2008 (contract assignment)

KBR/BE&K Engineering of North Carolina

Position: Sr. Piping Designer. Location: Raleigh, N.C.

Projects: E.I. DuPont of Fayetteville. Various small upgrade projects throughout the plant.

Verso Paper Inc. Concentrator replacement & replacement of aging underground mill water system with new above ground system servicing machines & buildings plant wide.

November 13, 2006 to May 4, 2007: BE&K Engineering of North Carolina (contract assignment)

Position: Sr. Piping Designer. Location: Raleigh, N. C.

Project: Energy Optimization Project (heat recovery system) for International Paper. Conceptual design of equipment general arrangements & piping layout in existing conditions.

February 2006 to May 2006: Industrial Design & Construction (IDC/CH2MHILL) contract assignment.

Position: Sr. Piping Designer. Location: Manassas Va.

Project: Base build project for Micron Technology. Layout of new equipment & piping systems for a silicon chip plant refurbishment.

August 2005 to February 2006: Shaw Stone & Webster Inc. (direct hire)

Position: Sr. Piping Designer. Location: Hopewell Va.

Projects: Design of piping systems for new equipment installations & process upgrades for Honeywell. Participated in PSM (plant safety management) as built P&ID program.

June 2005 to August 2005: Progressive Design Inc. (direct hire)

Position: Sr. Piping Designer. Location: Richmond Va.

Projects: Various small process upgrades for Boeringer & Ingleheim Chemical Inc.

November 2004 to May 2005: Lockwood Greene (contract assignment)

Position: Sr. Piping Designer. Location: Norfolk, Va.

Project: New chemical tank farm expansion project for Boeringer & Ingleheim Chemicals Inc.

July 2002 to November 2002; Danis Environmental Inc. (contract assignment)

Position: Sr. Piping Designer. Location: Newport News VA.

Project: Water Treatment Plant for the City of Newport News.

April 2001 to January 2002; Industrial Turn Around Corporation (ITAC)

Position: Piping / Mechanical Designer. Location: Richmond/Enon VA.

Project: Tobacco plant expansion for Philip Morris.

January 2000 to April 2001; Hatch Kaiser Inc. (contract to direct)

Position: Piping/Mechanical Designer. Location: Glen Allen, VA. & Gramercy LA.

Project: Gramercy Plant Rebuild Project, (bauxite to alumina) for Kaiser Aluminum & Chemical Corporation.

May 1999 to Sept 1999; Chaparral Steel Corp. (contract assignment)

Position: Mechanical Designer. Location: Petersburg, VA.

Projects: Generated various mechanical, control, and structural drawings to facilitate the start up of a new steel recycling plant.

April 1998 to March 1999; McKinney & Co.

Position: Piping Designer. Location: Ashland, VA.

Projects: Light industrial/commercial projects for clients such as Howmett, Kaesar Compressor, Eternal Chemical, & Luckstone.

Dec. 1996 to Oct. 1997; Day & Zimmermann Int'1 Inc. (contract assignment)

Position: Piping Designer. Location: Richmond VA.

Project: Expanded Tobacco Capacity & Flexibility Project for Philip Morris.

May 1996 to November 1996; Hershey Foods Corp. (contract assignment)

Position: Piping Designer. Location: Hershey, PA.

Projects: Various food line expansions and new product lines.

Feb. 1996 to May 1996; Life Sciences Int'l, Div. of Day & Zimmermann (contract assignment)

Position: Piping Designer. Location: Merck Stonewall Plant, Elkton VA.

Project: Sterility Assurance Project.

July 1995 to Feb. 1996; Bechtel Chemical Corp. (contract assignment)

Position: Piping Designer. Location: Columbia, SC.

Project: 5 new plastic polymer plant lines for Carolina Eastman.

Nov. 1993 to April 1995; Susquehanna Valley Systems Inc.

Position: Sales/Application Engineer & Designer. Location: Berwick, PA.

Projects: Back River Waste Water Treatment Plant for the City of Baltimore; R & D project-pilot plant, waste to natural gas production.

June 1988 to July 1993; Merck Mfg. Division (contract assignment)

Position: Piping Designer. Location: Cherokee Plant, Danville, PA.

Projects: Xanthum gum process installation, HAZOP project, & P&ID update

July 1985 to May 1988; Ebasco Services Inc.

Position: Piping Designer. Location: Glen Rose, TX.

Project: Comanche Peak Steam Electric Station, new construction for Texas Utilities.

Feb. 1985 to April 1985; Weirich & Associates (contract assignment)

Position: Field Engineer, conduit & cable tray installation. Location: Clinton IL.

Project: Clinton Steam Electric Station, new construction for Illinois Power.

Oct. 1982 to Feb. 1984; Ebasco Services Inc.

Position: Field Engineer, system start-up. Location: Taft, LA.

Project: Waterford Steam Electric Station for Louisiana Power & Light

April 1981 to June 1982; Bechtel Power Inc. (contract assignment)

Position: Pipe Support Field Engineer. Location: Berwick, PA.

Project: Susquehanna Steam Electric Station for Pennsylvania Power & Light

July 1980 to Mar. 1981; L. K. Comstock

Position: Piping Designer & Structural Pipe Supports. Location: Shoreham, NY.

Project: Shoreham Nuclear Power Station, for Long Island Lighting Co.

Nov. 1977 to July 1980; Ebasco Services Inc.

Position: Piping Design Draftsman. Location: Jericho, NY.

Projects: Surry Nuclear Power Station, Cholla Steam Electric Station, Laguna Verde Nuclear Project.

July 1977 to November 1977; Henderson & Bodwell

Position: Design Draftsman. Location: Farmingdale, NY

Projects: Underground utilities, roads, & land development maps (topos drainage systems, lot staking maps).

July 1975 to July 1977; Euclid Equipment Inc.

Position: Design Draftsman (manufacturing environment) diesel gen sets. Location: Hauppauge, NY.

June 1970 to June 1974

United States Navy, U.S.S. Myles C. Fox DD-829

Rate Machinist Mate 3rd Class

Contact this candidate