Registered Professional Engineer

State of New York, New Jersey, and Pennsylvania

OBJECTIVE: SR Electrical Design & Specification Engineer

EXPERIENCE:

**/**** ** ******* ** Manager Construction

Commdex consulting llc

Norcross,GA 30092

Reviewed the QC construction design and installation of the fiber optic project for the

Pennsylvania Turnpike Commission

Reviewed request field information (RFI) during design Phase

Reviewed the QA(quality assurance) during design phase using KAHUA construction

management program

07/2014-04/2019 HAKS Architects & Engineers

40 Wall Street

New York, New York 10005

Sr.Electrical Project Engineer

Electrical design and specifications of indoor/outdoor lighting, grounding, lightning protection, CCTV surveillance camera, card access, and security systems.

Single line power distribution and motor control schematics; short circuit and voltage drop calculations, and sizing electrical feeders and circuit breaker coordination.

Design Fire alarm system and emergency generators for the following New York

City housing authority projects:

Gravesend High Rise Apartments, Brooklyn, NY.

Van Dyke Housing Apartments, Brooklyn, NY

Boulevard Housing Apartments, Brooklyn, NY

Bushwick Housing Apartments, Brooklyn, NY

Castle Hill Housing Apartments, Bronx, NY

Stapleton Housing Apartments, Staten Island, NY

Brownsville Housing Apartments, Brooklyn, NY

Queensbridge Housing Apartments, Queens, NY

Ingersoll Housing Apartments, Brooklyn, NY

06/13 -06/14 SR. Electrical Project Engineer

Chemical Engineers & Instrument Consultants

2 Terri lane, suite 125

Burlington,NJ 08016

Electrical design and specifications of lighting, grounding, single line power

distribution, motor control centers,circuit breakers short circuit interrupting capacities, voltage drop &arc flash calculations for Neutrogena plant located in South California

07/12 to 05/13 SR. Electrical project Engineer

Judge Group

300 Conshohocken Road, Suite300

West Conshohocken, PA 19428-2949

Electrical design and specifications of lighting, grounding, lightning protection,

Single line Power distribution, Short circuit &voltage drop calculations, fire alarm

systems, motors control schematics, clean room power monitors, Variable frequency drive for motor starters, telecommunication and security systems for the following projects :

Facility addition & renovation of clean rooms for WEST STAR Pharmaceutical

production facility at Kinston, NC

Renovation of Clean room N-114 For SRI International (SARNOFF) at

Princeton,New Jersey

Renovation of new corporate office for the THALHEIMER Brothers, inc at

Philadelphia, PA.

09/10 to 06/12 SR. Electrical Project Engineer

The Gibson Tarquini Group

764 Cuthbert Blvd., Cherry Hill, NJ. 08002

Electrical design and specifications of lighting, power distribution, data, telephone

security, fire alarm, paging, and sounds system for major renovations at Garfield,

Twin Hills, Stuart, Hawthorne, and James Schools for the Willing Boro School

District of South Jersey.

• Coordinate with PSEG for 13.2 KV income service, sized pad mounted transformer, underground duct bank, service entrance outdoor CT cabinet and indoor main distribution switchboard.

07/09 to 08/10 SR. Electrical Project Manager

ETI Professionals INC.

165 S. Union Blvd., Suite 700, Lakewood, CO. 80228

Reviewed A/E design and Electrical construction management of MALCOLM RANDALL, VA Medical Center at Gainesville, FL. ( 200 beds hospital.)

•Performed daily site visits and documented construction progress report using Paragon Construction Management Software.

•Approved monthly percentage construction completion report.

•Assessed shop drawing submittals per VA specifications /drawings requirements.

and prepared return of submittal reports.

•Resolved contractor’s issues and request field information (RFIs) .

•Prepared subcontractor’s request for proposals (RFPs) and cost estimate using Paragon Software.

•Reviewed 13.2 KV SQUARE “D”dual entrance primary and 480/277 Volts secondary

unit substation; short circuit interrupting capacities and coordination studies;

emergency power management and monitoring systems.

•Reviewed low voltage systems design including fire alarm, security, nurse call,

paging, and communications.

06/04 to 05/09 SR. Electrical Project Manager

URS CORPORATION

1375 Euclid Ave., Suite 600, Cleveland, Ohio 44115-1808

• Implemented URS prolog construction manager software.

• Reviewed consultants engineers electrical design & specifications of lighting, power distribution, data, telephone, security, fire alarm, paging and sound systems for major renovations & new schools construction for the School District of Philadelphia.

10/01 - 4/04 SR. Electrical Project Engineer

RCM Power Systems

2500 McClellan Avenue, Pennsauken, New Jersey 08109

• Electrical design and specification of lighting, grounding, medium voltage ( 13.2 KV) & low voltage (600V) switchgears, power distribution and control schematics:

• Performed short circuit study, voltage drop calculations, load flow analysis,

transient motor starting and coordination study using SKM Power Tools software

(Dapper and Captor) for the Arthur Kill project, fuel oil facility addition at Staten

Island, New York.

5/99 - 8/01 SR. Electrical Project Engineer

COSENTINI ASSOCIATES

Two Penn Plaza, New York, New York 10121

Electrical design and specification of lighting, power distribution system, addressable fire alarm and security systems, telephone, intercom and nurse call systems at the following facilities:

• St. Barnabas Hospital, trauma and x-ray additions, Bronx, New York.

• Kings County Hospital, Building E, 6th floor renovation, Brooklyn, New York.

• Centra-State Hospital, operating rooms, Freehold, New Jersey.

• Montefiore Medical Hospital, Bronx, New York.

• Egger Nursing Home, upgrade emergency system, Staten Island, New York.

• Yeager Nursing Home, kitchen renovation, Rockland County, New York.

• Bank Leumi, New York, New York.

• Jersey City YMCA, Jersey City, New Jersey.

• Long Island Children Museum, Hempstead New York.

10/97 - 4/99 Electrical Project Engineer

GANNETT FLEMING

209 Senate Avenue, Camp Hill, PA

• Electrical design & specification of lighting, power distribution and control for the Marine Corps Logistic Base Bldg. #1121.

• Electrical design of power distribution, control schematics, and instrumentation for a wastewater treatment plant for the Williamsport Sanitary Authority, Lycoming County, PA.

10/95 - 10/97 Electrical Project Engineer

McHUGH ENGINEERING

550 Pine Town Road, Suite 205, Fort Washington, PA 19034Electrical design and specification of power distribution system, lighting, addressable fire alarm and security system, telephone and data systems at the following facilities:

• Christiana Hospital, Cardiac Catheterization Lab, Wilmington, DE.

• VA. Lebanon Hospital, Buildings #1 and 17, Lebanon, PA.

• Delmarva Power and Light Data Center, Newark, DE.

• Curran Municipal Building, Media, PA.

• Wellness Center, 6800 Market Street, Philadelphia, PA.

• Emeritus Assisted Living Facility, Newark, DE.

• Best Buy Store, Mt. Laurel, NJ.

• Brandywine Valley Baptist Church, Wilmington, DE.

7/93 - 9/95 Electrical Project Engineer

THE CITY OF NEW YORK

One Centre Street, New York, NY 10007

• Design/built of lighting, power distribution, fiber optics and data cables for renovation of the Bureau of Finance, 345 Adams Street, Brooklyn, NY.

• Electrical design and specifications of lighting, power, telephone and data system for renovation of Queens Borough Hall, Kew Gardens, NY using Auto CAD Release 12.

• Electrical power feeders replacement with mineral insulated cables for the Bronx Family Court, Bronx, NY.

11/90 - 5/93 Electrical Project Engineer

THE HAMPDEN ELECTRICAL CORPORATION

1055 West Germantown Pike, R.D. #1, Norristown, PA 19403

• Designed electrical raceway and wiring for the installation of General Electric ADVANTX equipment used for a cardiac catheterization lab at the Montgomery Hospital, Norristown, PA.

• Upgraded hospital high-tension service in accordance with Philadelphia Electric Company requirements; design and specify 13.2 KV dual entrance outdoor, walk-thru switchgear with high voltage load-interrupter switches.

• Designed underground duct banks and manholes for high voltage primary feeders.

• Replaced two 750 KVA ASKAREL transformers with cast coil and silicon oil-filled transformers.

8/85 - 11/90 Electrical/Instrument Engineer

E.I. DuPONT de NEMOURS & CO.

• Wrote scope of work and designed instrument loop wiring diagrams for measuring instruments, electronic transmitters and controllers for the crystallizer temperature controls, dryer temp. control and nitric acid dilution control at CHAMBERS WORK PLANT, Deepwater, N.J.

• Upgraded motor starters and instrument panels.

• Replaced pneumatic transmitters and controllers with electronic transmitter to interface with new distributed control system Honeywell TDC-3000.

• Design single line diagram power distribution system and motor control centers for the Emerson constant torque, adjustable speed A.C. drives, layout inverter equipment room for a 32-position spinning machine nylon yarn production line at E.I. DuPont, Spruance Plant, Richmond, VA.

• Perform short circuit calculation to size inverter KVA to withstand short circuit current with a fully coordinated motor protection fuses.

• Electrical design and specifications of lighting, grounding, high, medium and low

voltage switch gear, motor control centers, fire protection and security system, for

the Brandywine, Nemours and the DuPont Buildings, Wilmington, Delaware

8/83 - 8/85 Electrical Project Engineer

SOUTH EASTERN PENNSYLVANIA TRANSPORTATION AUTHORITY

200 West Wyoming Avenue, Philadelphia, PA

• Reviewed electrical design and shop drawings for the installation of 15 M.V.A., 12 K.V., 25 Cycle static Frequency converter for the Wayne Junction substation.

• Wrote standard specification for RHSL catenary insulators and high mast lighting poles with high pressure sodium fixtures.

• Improved the power factor at Wyoming shop and Southern garage to meet Philadelphia Electric Company requirements.

• Designed power and control schematics for the Frontier garage bus washer system, the Suburban Station air conditioner system and the Comely garage fuel dispensing system.

.

EDUCATION: Bachelor of Science Degree, Electrical Engineering, with Power Specialty,

AIN SHAMS UNIVERSITY, Cairo, Egypt

TRAINING: AUTOCAD Releases 2012& 2013 Level I and II AutoCAD Training Center

INTERGRAPH PC MICROSTATION Engineering Data System

PROFESIONAL Institute of Electrical and Electronic Engineers (IEEE)

AFFILIATIONS: Instrument Society of America (ISA)

National Fire Protection Association (NFPA)

Illumination Engineering Society (IES)

National Society of Professional Engineers (NSPE)

FOREIGN

LANGUAGES: Fluent in both French and Arabic

PERSONAL: United States Citizen

Contact this candidate