A core competent and multi – skilled professional, result oriented with a creative mindset, excellent team spirit, friendly personality, analytic thinker and a hands on approach to problem solving. Over 20 years of work experiences in Marine and Mechanical Engineering. Highly motivated, hardworking, organized, logical and target driven with a track-able record of achieving targets and exceeding expectations.

Leverages experience in Marine and Mechanical Engineering to maximize organizational strategies and outreach. Committed to delivering exceptional results through strategic planning, innovative and diligent execution that creates sustainable value for the organization and contribute to business success and growth.

CORE COMPETENCIES

Expertise managing marine operations in a wide range of industrial settings; sustaining and encouraging safe work environments, and demonstrated ability to streamline operations; strong skills in directing and motivating staff; fluenct in the English language; possess a wide range of technical expertise on various aspect of marine operations; Mechanical and Industrial Maintenance and Repair, Interpretation of engineering drawing with in-depth knowledge of hydraulic and pneumatic. An articulate and highly organized individual.

PROFESSIONAL EXPERIENCE

Hydraulic and Pneumatic Mechanic GETCH Limited April 2010 – June 2023

Oversaw the selection of materials for fabrication of Dredger, design the schematic drawing of machinery and parts to be fabricated (using Lathes, milling and hand power tools), draw up routine maintenance of all equipment and machinery (including Earth moving Equipment like Bull Dozer, excavator, crane. Also on Conveyor Machines). Stock up spare part, make requisition and Import.

Key Responsibilities:

Carried preventative maintenance of hydraulic pumps of stationary machinery ( hydraulically operated water-tight doors, winches, shark Jaws, capstan, hydraulic -press)and mobile machinery (Excavator, cranes, bull-dozer) : Daily, Monthly and Annual maintenance.

Ensures the hydraulic system runs smoothly by daily checking the oil level, temperature changes in the oil, checks the oil for water or dirt, checks for leakages and verifying pressure gauge reading.

Carried out repair on the gear of the hydraulic pump.

Replaced a leaking hydraulic pressure hose of the winch

Fabricated the hydraulic system of the winch (tank, pipes, hoses and valves)

Changed the hydraulic seal of the crane boom.

Changed the track and the idler of the bull dozer.

Repaired the Pneumatic valves on dry and wet bulk tanks

Proper Documentation and Filing of Projects Schedule (Start and End Date).

Planned Preventive Maintenance, Work and Parts orders using the CMMS

Logging in Daily activities in the Record Book.

Project Lead for Team members.

Fabrication of dredger pontoons and machining of equipment parts.

Installation of Hydraulic system unit of the dredger (cutter edge, winches, spud pillars)

General maintenance of dredger (electrical submersible and centrifugal pumps, winches, hoist, generators, etc.) and all other Marine and Earth moving Equipment.

Responsible for the technical and safety operations of the dredger.

Oversaw the administrative operations of crew members.

Operations / Technical Superintendent Hydroserve Energy and Engineering Ltd Oct. 2006 – Dec. 2009

Responsible for the technical and safety operations of the dredger and heavy duty equipment. Carried out the servicing and maintenance of pumps and generators of different types on land, swamp and offshore to meet the safety and QAQC standard of the clients.

Repair, Overhaul and maintained the Toyo submersible pumps(DP50 and DP75) changing the worn wear plate, agitator, bearings, seals, regular check for water in the oil chamber and replacement of oil where necessary.

Carried out the servicing of valves of different types

Carried out the servicing of compressors of different types such as ingassoland, airman.

Carried out preventive maintenance, such as scraping and painting of Equipment

Complete interior and exterior painting projects with precision and attention to detail.

Prepare surfaces by sanding, filling, and applying primer as necessary.

Select appropriate paints and tools used for each job, ensuring the best results.

Ensure worksite safety by following safety protocols and using appropriate personal protective equipment.

Collaborate with clients to discuss project requirements and provide recommendations for optimal results.

Maintain clean and organized workspaces, leaving the premises in excellent condition.

Carried out routine planning and of maintenance of the equipment.

Supervised equipment checks and certification to meet up with QAQC policy of the client.

Attended weekly safety meetings and drills both in the base and on location.

Oversaw the administrative operations of crew members.

Operated, Maintains and Repair Forklifts, Excavator, Dozer and other machinery

2nd Engineer Seabulk Offshore April 2006 – Sept. 2006

Deputized for the First Engineer during which I fixed the Pneumatic Valve of the Air-Starting system of the generator, isolate, cleaned and reinstall the Heat Exchanger of the main engine. Related with the Captain and gave adequate information to the Bridge Crew.

Diagnosed faults and effect repairs on equipment and machinery onboard. Detected the temperature rise of the main engine, traced it to a clogged Sea Chest. Engine was shut down, cleaned and reinstall the Sea Chest filter and temperature was normalized.

Adhered to charterer work schedule and ensured soundings are accurately done

Key Responsibilities

Ensured smooth running of main propulsion engines.

Welding, Fabrication and installation onboard vessel

Ballasting of vessel.

Manning and Standard watch keeping of engine room machinery both main and auxiliary engines.

Inventory of stocks and made orders for spare parts.

Received and trans-loaded of Bunkers and bulks to vessels and rigs/platforms.

Kept daily records of works and activities in the Log book, ensured good house keep of the engine room.

Ensured safety of personnel and machinery on board.

3rd Engineer On AHTS Maersk Sealand June 1997 – March 2006

Assisted the 1st and 2nd Engineers to carry out maintenance as required

Responsible for daily sounding of fuel, oil and water

Responsible for the bilge system on board.

Bi-weekly maintenance of HVAC system onboard: cleaning air filters and checking system for leaks.

Maintained, calibrate and service all Pneumatic Valves on the bulk system.

Maintained the Azimuth and Bow thrusters; changing seals and greasing.

Maintained bulk pumps: rotary and centrifugal pumps.

Overhauling of Hydraulic pumps and re-kitting of hydraulic hoses.

Carried out overhauling of main engines on board such as Caterpillar, Deutz and Volvo engines.

Fabricated an oil tank for the winch system.

Assisted and participated in Anchor Handling and Rig Move Operations

Profield Offshore Limited: Jan.1994 – Sept. 1996

Cadet Engineer on board MV Eugene Fromentin Vessel

Daily routine checks of oil and water level, air and electric starting system on main propulsion engine and generator. Carried out routine(hours) servicing of the main and auxiliary(generator) engine (oil, oil filter, fuel filter and air filter change)

Sounded Fuel, Oil and Water daily to ascertain quantity consumed and quantity left onboard.

Checked Zodiac (inflatable passenger boat) for leaks, outboard engine mounted for proper functioning before launch.

Operated deck crane and carried out its maintenance checking oil and water level and starting battery state.

Daily prepared all sandblasting equipment (Air compressor, pressure blast tank, hoses and nozzle) ready for use. Replaced defective parts or equipment before use.

Daily cleaned and or changed Air compressor filters, checked Air compressor engines oil and water level. Routine servicing of engine (changing oil, oil filters, fuel filters, air filters) are carried out.

Responsible for checking and changing vessel manhole/hatch seals.

Responsible for cleaning and maintaining a neat working environment.

Heavy Duty Mechanic

Preventive Maintenance on company's heavy duty equipment (Bulldozer, Crane, Forklift, Payloader and Trucks), servicing each equipment as at when due, bleeding air tanks, greasing and general maintenance.

Part of team that constructed conveyor system of the sand dryer. welding and fabrication works of the burner section of the sand dryer.

Worked with the chief mechanic to carry out replacement of bulldozer track Idler, replacement of crane boom seals, replacement of crane hydraulic hose and hydraulic pump.

Maintained a clean working environment onboard and on site.

Worn correct PPE and worked safely at all times

SKILLS:

Proficient in marine propulsion system, including diesel engines and gas turbines

Strong knowledge of maritime regulations and safety protocols.

Skilled in equipment trouble shooting, diagnosis, and repair.

Familiarity with maintenance management software and technical documentation.

Effective team leadership and communication abilities.

Strong problem-solving and analytical skills.

EDUCATION AND PROFESSIONAL CERTIFICATIONS

Industrial Mechanic(Milwright) 433A Red Seal Certification (Candidate).

Advance Diploma in Mechanical Engineering Rivers State Polytechnic, Bori

Diploma in Marine Engineering Federal College of Fisheries and Marine Technology, Lagos

3rd Class certificate of competency in Marine Engineering Ministry of Transport

Officer of the Watch (OOW certificate of Competency in Marine Engineering Ministry of Transport

Executive Masters certificate in Project Management Project Management College, UK

Total Productive Maintenance (TPM) for production and quality system Alison Trainers, USA

Sales and Negotiation skills Alison Trainers, USA

Contact this candidate