EDUCATION

SKILLS

LICENSE/CERTIFICATES

EXPERIENCE

Collins Aerospace 8/22

Recieving inspector audit parts and vertified certifacte of conformance, write many QN Boeing, Renton, WA 9/20- 6/22

QA Lead, skin works, various defects on 737 max

Spirit Aerosystem 4/18-12/19

QC building entire fuselage of 737 MAX,center build of wing box, trouble shooting/wrote many NCR, collaboration with engineers and management to improve build process Triumph Aerostructure, Red Oak Tx 9/17-2/18

QC inspector,Bombardier builder latest 7000 & 8000 global express wings, final assembly line, inspection of Hyd line/various Actuator flight controls (aileron, flaps, spoilers, structure Bombardier spec), trouble shooting for Hydraulic lines, system check 3000 psi, upper and lower skin fasteners within Bombardier spec, verified electrical wire, probe and meter installations, trouble shooting for wing electrical systems. Airframe and Powerplant

Advanced composites, sheet metal training at Sabretech FAA regulations

Maintence forms CATIA & ENOVIA

SIERRA ACADEMY OF AERONAUTICS

CA DE ANZA COLLEGE

Experienced Quality Aviation Specialist with expertise in safety, compliance, and operations TONG HUN LEE

QUALITY AVIATION SPECIALIST

UNIVERSITY OF PHOENIX

ad2gie@r.postjobfree.com

602-***-****

NDT

MAGNETIC PARTICLE TESTING AND LIQUID PENETRATE

ADVANCED COMPOSITES CERTIFICATE

EDDY CURRENT. QUALITY CONTROL INSPECTION OF DC-10

NORTH WEST GEN FAM OF DC-9, AIRBUS 320, 330

BOEING 757, 737,

APU, TPE, FAN ENGINE CERTIFICATE BY HONEYWELL

BLUEPRINT CERTIFICATE BY DOUGLAS.

GENERAL RADIO AND SHIP RADAR OF FCC LICENSE.

U.S AIR FORCE C-17 TCTO FAM,

BOEING MRB (MATERIAL REVIEW BOARD)

ISO (INTERNATIONAL ORGANIZATION STANDARDIZATION) AS (AEROSPACE STANDARD) 9100. EXPERIENCE

Zodiac Aerospace, Santa Maria CA 1/17-8/17

Seat assembler, built various commercial aircraft (Boeing, Airbus) Dassult Falcon Jet, Little Rock AR 12/15-12/16

QC inspector, interior seats, divan, headliners, components on falcon 2x, 7x, 8x, 9x, wrote and inspected verified first article inspection, verified parts per enovia v5, trouble shooting aviavionic various systems

Spirit Aerosystems, Wichita KS 7/15-11/15

Sheet metal tech, building Boeing 737 max fuselage various skins and structures. Final reworked team, repaired structures before delivery, rebuilt tanks and cabins. Spirit Aerosystems Tulsa, OK 9/13-6/15

Building entire wing of Gulf Stream280. Sheet metal tech, installation of clips and stand off various rear part of wing. Final assembly of hydraulic actuator for spoilers and flap systems. Installation of hydraulic lines and final test. Trouble shooting of electrical lines, systems, and testing boost pump, fine tune and leak check. Boeing San Antonio Tx, 1/11-7/12 *finish later*

Quality control inspector for U.S Air force. C-17 MRO center for Kelly USA Boeing IDS. Domestic and foreign aircraft C-17. Complying latest TCTO and air force regulations. Flight control structure inspections and crack check inspection for integrity. Buy off on sheet metal for airframe work and mod for safety of flight (TR, obiggs landing gears and systems

Evergreen Air Center 2/10-11/10

A&P on Various Boeing 747

Savannah Air Center, Georgia 8/08-12/09

Quality control inspector for business jets, Gulf stream, G3, G4, G5 and Bombardier Global express and 5000. de Haviland dash 7 & 8 and other turbo prop aircraft, enginges

(Pratt Whittney Canada and Honeywell TPE. Complete interior and MRO. Paint center for Bombardier, Release aircraft per various agency like FAA, EASA. Canada Air safety. FIrst article inspection and latest FAA AD and Canada flight safety. Installed latest Avionics computers and download software of latest service bulletin. Vought, Dallas, TX 11/07-02/08

Quality engineer/trainer. CH-60 Black Hawk L,M, and S model. Building cabin on all S, M, L models. Collaboration with other engineers

Boeing, Kelly, San Antonio, TX 4/07

Aircraft quality assurance inspector. U.S. Air Force C-17 transport heavy lifter; worked on various C-17 aircraft varying from power plant to avionic systems to structure. Certification of Air Force TCTO Fam, Egress, Igress, also audited in internal and external parts of aircraft. Trained Boeing MRO.

Eclipse Aviation, Albuquerque, NM 4/2007-3/2007

Aircraft quality assurance inspector. Quality control inspections done on aircrafts. Review and approval of aircraft documentation. Final assembly and functional checks. Running of avionic systems such as FADEC and major flight control installation. NCR and 8130-9 conformations for partial and complete aircraft assembly. EXPERIENCE

Sino Swearingen, Martinsburg, WV, 4/2006- 09/2006

Aircraft quality assurance inspector. Responsibility of 30 aircrafts for quality control inspections. Review and approval of aircraft documentation. Proper inspection and installation of CMP, ASC, CB and AD compliances. Coordianated mechanical, electrical and inspection requiremnts on aircraft during maintenance and outfitting. Wrote discrepancies and monitored work order items, FAA required conformity inspetions and certification data for FAA approval. Audited vendor companies for quality and workman ship of AS 9100 SAE ISO & internal audit for quality build airframes. Sikorsky Air Craft Corp, Stratford CT 2/2006- 4/2006 Aircraft quality assurance inspector quality insurnace inspectionn of Black Hawk Sea Hawk (airframe, power plant, and hydraulic systems) quality insurnace inspection on airframe (rivet, muts and bolt torque, safety wire and claps for proper installation on front, middle and tail sections) Powerplant inspection (duct, apu, air cooler, and engines for proper installation) Final assembly for complete aircraft. Northwest Airlines, Minneapolis MN, 5/2005-1/2006

A&P technician, quality control inspector. RII, RVSM and avionics and SEPTRE computer systems and airport trained. Maintence on ramps, inspection on various North West fleet. Boeing 747, 757, airbus 320, 319, 330; DC-9, DC-10 Total Aircraft service, Van Nuys, CA, 12/2003- 4/2005 A&P technical/quality control inspector. A&P for BAE’s Hawker and Gulf Stream, de haviland dash 7. C check on Hawker, dash 7 and A check on Gulf Stream. Provided inspections for all RII items.

Avtel Aerospace, Mohave, CA 7/2002- 11/2003

Quality control inspector, QC in flight line and storage of various aircraft (Boeing 747, 737, 767, 777 of Virgin Atalantic fleet and 757 of National airline, Douglas and airbus aircrafts. Found corrosion and inspection of various parts of aircraft. Created various routines to non routine work cards and follwed FAR regulations on storage of different fleet (FED-EX, UPS. US AIR, Continental, North West, Air Canada, Haviland dash 7 & 8 along with many others). Audited internal and external. Bombardier Aerospace, Tucson, AZ, 12/2001- 07/2001 A&P, sheet metal, worked on mainly global express line and some Lear. Worked as QC, inspectionon quality control on Airframe, Engine. Especially complying Bombardier service bulletins. Boroscope on engines. Worked as A&P mechanic and some sheet metal.

MD Helicopter, Mesa, AZ 11/2000- 12/2001

A&P tech, worked on Explorer(interior mod, and avionic mod), inspection on fuselage and electrical and power plant. Worked on 500,600 and 900 series, Complying with FAA AD.

Allied Signal Aerospace (Honeywell), Phoenix, AZ, 11/1998- 11/2000 A&P & sheet metal technician. Offered APU mechanic in permanent position assembly line of 86 enginge line got sign off and cross trained in various different APU 331-200, 331-200ER, 331-500, 280 and small 36. Big 700, 660 plus TPE-331 and fan engines. EXPERIENCE

A&P & sheet metal technican. Worked on 727, 737, 777 MD80 C,D. Worked as A&P sheet metal mechanic with both DC-10 and MD-11 aircraft. Located and installed cargo door plug including lower, mid and upper titanium skins per Douglas DC-10 blueprint, various SRM repairs including floor beam and seat track repairs. Removed and replaced corroded fasteners, reinstalled with oversize fastenrs including hi-locks. Fabricated various parts, such as angles, shims and drains, Installed stringers, spars, and intercostals, Worked on various parts of main landing whells such as hydraulicbrakes and front landing wheel well. Avionic related equipment, interior interior mod, blanket, panel and various ducts, removal and installation of various flight controls: flaps, ruder, slats, and elevator.

Allied Signal Aerospace (Honeywell), Phoenix, AZ, 11/1998- 11/2000

*continued*

Trouble shooting the motor and find discrepancies, disassembly of motor and boroscope the blade.

Dimension Aviation, Goodyear, Arizona 11/1997-10/1998 Sheet metal and A&P and Avionics tech on Douglas DC-10 & MD 11 for P to F Mod for Fed Ex.

12/1996- 11/1997

Attended and Graduated Sierra Academy of Aeronautic. Oakland CA. Sabre Tech, Dimension Aviation, Phoenix, AZ, 07/1994-11/96

Contact this candidate