Annexure-* FORMAT FOR BIO-DATA OF INSPECTORS/SURVEYORS

1.0 PERSONAL PARTICULARS

Name

PUNEET KUMAR YADAV

Date of Birth

20.11.1996

Nationality

INDIAN

Phone

+91-819*******

E-mail id

ad2bsj@r.postjobfree.com

Address

ROOM NO. 603, Shri luxmi Chhaya Building, Near Bharat Gas Godown, Ambernath (East), Pin-421502

Passport Details

No.- R5744027 Valid till 17/12/2027 issued by Lucknow

2.0 EDUCATIONAL QUALIFICATIONS

Engineering Degree/Diploma

B.E

Branch of specialization

MECHANICAL ENGINEERING

Full-time/part-time/correspondence

FULL TIME

Year of passing

2017

College/University

ANNAMALAI UNIVERSITY

3.0 PROFESSIONAL CERTIFICATIONS

Professional certifications in welding, NDT, Painting inspection

Paint Coatings, Inspection & Quality control ( Level 1 & Level 2) Certified by SSPC India & NDT Level II

Name of issuing organization

SSPC India – IIT Mumbai & NDT Level II – Institute of Inspection and Testing Technology.

Validity of certificates

--

4.0 COMPUTER PROFICIENCY

Computer software used

MS OFFICE

No. of years’ experience of using above software

12

5.0 TRAINING ATTENDED IN LAST 5 YRS

BOSIET for Offshore Project.

6.0 PRESENT EMPLOYMENT STATUS

Name of Organization

International Certification Services Pvt. Ltd

Date of Joining

February 2021

Nature of employment - Full time/Part Time

/Contract

Full Time

Designation/Post

Quality Engineer (Surveyor)

Role and Responsibilities

QA/QC, Testing and Inspection of Insulating Materials and its accessories.

7.0 WORK EXPERIENCE (provide detailed work experience of Certification/Inspection activity year-wise. Attach separate sheets if required) Please refer attached sheet.

Please refer attached sheet for - Name of Organization / Period of employment / Project Details, Project Period, Job Assignment, Details of Inspection done

SUMMARY OF EXPERIENCE:

1.Currently working with International Certification Services Pvt. Ltd. From February 2021 Till date as a Surveyor (TPI).

Job Responsibility & Job Profiles:

Carried out material inspections, checked the material traceability, color codes, test certificates, dimensions and physical conditions.

Witnessed and ensured hydro test & pneumatic tests are conducted and conform to the project specifications.

Monitored all inspection activities including piping works (for materials of carbon-steel, stainless steel and alloy steels), pressure vessel and structural works and equipment erection, etc.

Handled review and approval of test packs and Review of NDT results, Repair rates, etc.

Undertaking QC painting / coating activities

Inspect the surface preparation, blasting profile, dust/oil contamination, metal lamination and all surface irregularities etc.

Inspection of the painting material as per the specification and batch number.

Monitor the painting activities as per the data sheet, like climate condition, mixing ratio, agitating, pot life etc.

Inspection of WFT& DFT in each coat, curing and recoat interval, painting defects and final inspection as per the specification requirement.

Performing Witness, Inspection and Certification for PQR, WQT, DFT Checking, Pull-off test, Holiday Test, Hydro test, NDT Methods etc.

Checking& recording of Percentage Relative Humidity, Dew Point, Steel and Air Temperature, Wet & Dry Film Thickness

Having good knowledge of cross country gas pipeline sites etc. Steel/ PE

pipeline, CGD project

Review of key rooting map, Isometrics and P&ID of piping, alignment sheet and fabrication

Organizing welder qualifications as per API 1104, ASME SEC IX (SMAW+GTAW)

Review all calibration certificate measuring instruments machine and welding machine

Inspection of all of activities of steel pipelines at site like trenching, stringing, welding

radiography, joint -coating, holiday testing of sand bedding and padding, lowering in of

pipeline and backfilling and pipe dia 12,8,6 and 4 type API 5L Gr B X- 52.

Construction of underground valve chamber of safety steel pipeline

Inspection of all activities I involved in hydro test of pipeline from AIR cleaning swabbing

Cathodic protection (Temporary cathodic protection/permanent CP method)

Preparation of weld map for site condition

Actively involved with clients during pre-commissioning to commissioning of pipelines

Inspection of special crossing like highway crossing, rail crossing, road crossing and deep

mallah/ canals by HDD machine and auger boring method.

Review and signing of all inspection reports on daily basis

To inspect all materials received at site for construction of pipeline like pipe, coating

sleeves, epoxy primer, welding electrodes and other consumables.

Layout and fit up inspection as per drawing and report.

Weld visual inspection

Monitoring EQT, WPS (ASME SEC lX) and PQR site condition

Material received inspection reviewed and signing IMIR report

Inspection before welding (review all documents codes standard specifications), During

welding (welding process, electrode, amp, voltage, inter pass temp. No of passes,

cleanness, position) and after welding (visual inspection, surface discontinuity, weld

reinforcement, PWHT, NDT method)

To ensure the execution of all activities at site as per quality standards formulated by clients.

Pre commissioning (Nitrogen purging) and commissioning.

Inspection of seamless pipe ASTM A106 Grad B and ASTM A333 GRADE 6 (LTCS), API

5L GRADE B.

To inspect the materials for material identification as per applicable code specification,

purchase order copy and correlating it with MTC.

Interface with various contractor and client.

Testing of all welders for performance test (WPQT) and coordinating with Client for welder

qualification.

To inspect joint fit-up of each joint and making fit-up inspection reports.

Inspections before welding, during welding and after welding.

Planning of NDT activities and review of reports.

To see the PWHT requirements of joints and to witness during PWHT.

Interpretation of radiography film as per API 1104 & ASME B31.3

To witness hydro test of piping

spools.

To supervise during cleaning of pipes by buffing or sand blasting. •

Preparation of all inspection reports from material identification up to hydro test.

Coordination with third party inspection persons during their witnessing.

Attending weekly and monthly meetings and QA/QC feedback to the management

Engineering: -

Monitor the daily construction activities, perform daily site-inspections, and Ensure compliance with the

QA/QC program, project drawings and Project specifications.

o Preparation of relevant quality documents.

Carry out dimensional & final weld visual inspection of on-site fabricated pipe.

Inspection before welding, during welding, after welding.

Monitoring welding parameters as per the approved WPS.

Preparing specific procedures, NDT reports, Inspection of piping and pipeline.

Monitoring quality of individual weld passes.

Monitor NDT process & Film interpretation.

Document Controlling as per the Client’s Requirement.

Welding Inspection base on codes and specification.

Familiar in ASME, API, ASTM, standard/ procedures, and Co-ordinate with client for QA/QC

activities. o Performing inspection as per ITP.

Conducted inspection and daily monitoring regarding the fabrication works;

Exposure in welding procedure and performance of welder according to ASME

SEC IX and AWS structural steel welding code D1.1 regarding WPS and welding

aspects.

Frequently monitoring of Fit-up and piping alignment.

Welding: - I have witnessed WPS, PQR, of carbon steel, low alloy steel, Stainless steel and

nonferrous corrosion protective weld deposition I am well versed with GTAW, SMAW

Welding.

Piping: -Stage wise inspection of numerous piping replacements and fabrication of various

sizes including. This included review of Fabrication drawing as QAP, WPS, and PQR

carrying out the flushing and testing of piping along with the specification as per safety rules

and regulation

Pipeline: - I have experience in inspection of pipe stringing, mainline & tie in welding (as per

WPS & PQR), NDT/DT Inspection (RT, MPT, LPT, UT), blasting, joint-coating, holiday testings of pipe during lowering & after Joint coating, River crossing by HDD Method, Hydro testing,

commissioning & all the inspection reports of various activity in pipeline.

Commissioning: - Inspection of testing & commissioning of various activities in oil & gas

field

2.Worked with Om Engineering Company.

From September 2019 - January 2021 as a Production Engineer. Job Responsibility & Job Profiles:

Supervision of fabrication and installation of insulation materials.

Prepared the IWO (Initial Work Order) in Tally Prime software and distribute the works as per customer works orders.

Prepared the drawing as per the requirement of the customers.

Inspection of field works as per codes, design drawing and approved changes associated with the customers.

Plant construction and project management.

Attending daily meeting with client, safety personnel to maintain coordination about site work.

Executing pre-commissioning and commissioning activities.

Punch list preparation, test pack review and final approval.

2.Worked with JPC Enterprises Navi Mumbai. From October 2018 - September 2019 as Supervisor

Offshore Activity-Monitoring the activities of installation of HVAC and its Compressor at various Platform at Mumbai High (South & North).

Job Responsibility & Job Profiles:

Review installation records/documents.

Attending daily meeting with client, safety personnel to maintain coordination about site work.

Supervision of fabrication and installation of HVAC and Compressor.

Participating in the meetings and discussions on technical matters related to project works and keeping ONGC apprised on all aspects relevant to aforementioned activities.

Pre commissioning/commissioning & liquidation of punch points.

Post project completion activities as per the requirement.

Conducting tool box meeting with all workers for what not to do at site to save life and to save environment.

Safety Surveillance during installation.

Monitoring of project progress on weekly basis.

Final checkup of installation of layout by using isometrics and marking as built drawings.

Supervision of erection of all types of piping spools of different material like CS, SS etc.

3.Worked with M/s Chandi Steel Industries, from July 2017- September 2018 as a Quality Supervisor.

Job Responsibility & Job Profiles:

Supervision of fabrication and installation of raw material.

Involved in the preparation of BOM and As-built documents.

Review drawings, codes, and specifications attaining weekly and monthly on production are part of my job.

Inspection of various materials such as pipe, tube, beam, forging, fitting and plates of various types of specification such as carbon steel, low alloy steel, stainless steel.

Monitoring the work, during in the process of raw material and ensuring the quality in the projects.

PUNEET KUMAR YADAV

Contact this candidate