Marcel McVey ****-** street

Email: ad2afg@r.postjobfree.com Edmonton Alberta

PH: 250-***-**** T6C3R4

Career Objective

To be part of a multi-disciplined, fast-paced team where my experience, expertise, knowledge and enthusiasm will add value and quality to the project. To continue to grow and expand upon my existing skills and develop new ones.

Summary of Qualifications & Duties

I am a Red Seal Inter-Provincial Journeyman Electrical/Instrument Technician. Over the years I have been employed in various aspects of construction and maintenance on numerous industrial projects, concentrating on natural resource development (Pit Mining, SAGD). I also have years of experience in manufacturing (pharmaceutical), as well as operating a service truck. During this time, I have acquired a vast amount of knowledge, experience and expertise while working and promoting a safe work environment in the following roles:

Electrical and Instrumentation (E/I) Construction and Maintenance

•Supervisory experience with well-developed leadership skills

•Experience in the development and implementation of systems as per ISO 9001

•Ensure all work scope is completed as per project specification/requirements, detail, Quality Management System (QMS) and approve Inspection Test Plan (ITP), as well as in compliance with all governing rules and regulations, (ex. Canadian Electrical Code (CEC), Canadian Standards Association (CSA), ABSA (the pressure equipment safety authority) and American National Standards Institute (ANSI), Occupational Health and Safety (OH&S), ARC Flash 2016)

•Experience in planning and scheduling

•Experience building Construction Work Packages (CWP’s, FIWP’s)

•Over 18 years’ service truck experience

•Install and modify cable support systems

•Install and modify raceway and tubing systems

•Pulling, gland, terminating and testing of power, control and instrumentation cables

•Perform installation, troubleshooting and maintenance of high, medium and low voltage equipment, (ex. High, Low, and Extra Low voltage switch gear (MCC), motors, VFD’s, control circuits, electrical JB’s, overhead cranes, lighting circuits, EHT, EHT controllers, safety/isolated grounding systems/grids, transformers and generators) and log and track daily progress

•Thorough understanding of control and automation systems from field devices to DCS (ex. Fieldbus, Delta V, Allan Bradley, Siemens, Modicon, PLC’s)

•Perform, log and track installation, calibration, troubleshooting and maintenance of all instrumentation equipment and devices, (ex. DCS and PLC cabinets, instrument JB’s, Instrument tubing, instrument tubing raceways, motorized valves, pneumatic valves, level, temperature and flow transmitters, sample stations, nuclear device, HPLC’s and environmental controls), log and track progress

•Experience writing and implementing of LOTO systems and all safe work procedures, (ex. JSA’s, FLHA’s, permits for general work, hot work, cold work, confined space and working from heights)

•Experience in operation of a variety of testing, calibration and repair devices, tools and equipment including voltmeters, ammeters, ohmmeters, insulation resistance testers, high potential test sets, circuit breaker testers

•Experience in the regulatory requirements and use of personal protective gear as required by ARC Flash 2016

•Experience with fire alarm systems, security and surveillance systems, and communication systems.

•Robotics, lighting systems, HVAC systems and heat trace systems.

•Upgrading and programming of PLC's, and DCS's.

•Experienced with computerized maintenance and record keeping systems.

•Interpreting drawings and manufacturer's specifications for the installation, calibration or repair of equipment.

•Active participation in job process improvements.

•Appropriate attendance and self-management. Performance of key job responsibilities in an accurate, efficient, courteous, and prompt manner.

•Active team membership, by sharing knowledge, cooperating and communicating pertinent information with coworkers and supervisor.

•Compliance with Employment Policy Agreements.

•Mentoring and promoting a safe work environment

Electrical and Instrumentation (E/I) Quality Assurance (QA) and Completions

•Experience overseeing and auditing the development and implementation of systems as per ISO 9001

•Verify and Log quality exhibits and as-built documentation for progressing Client turnovers

•Ensure all documentation is completed as per project requirements

•Experience with Electrical Regulatory Compliance (ERC)

•Ensure all work scope is completed as per project specification/requirements, details, Quality Management System (QMS) and approve Inspection Test Plan (ITP), as well as in compliance with all governing rules and regulations, (ex. Canadian Electrical Code (CEC), Canadian Standards Association (CSA), ABSA (the pressure equipment safety authority) and American National Standards Institute (ANSI), Occupational Health and Safety (OH&S), ARC Flash 2016)

•Coordinate with QA/QC to ensure quality exhibits are completed in a timely fashion

•Coordinate with QA/QC to resolve problems and deficiencies

•Review and signoff on contractor ITP’s

•Review and signoff of field inspection reports for all high, medium and low voltage electrical equipment, (ex. High, Low, and Extra Low voltage switch gear (MCC), motors, Variable Frequency Drives (VFD’s), control circuits, electrical JB’s, overhead cranes, lighting circuits, Electrical Heat Tracing (EHT), EHT Controllers, safety/isolated grounding systems/grids, transformers and generators), log and track progress

•Review and signoff of all instrument field inspection reports for instrumentation equipment and devices, (ex. DCS and PLC cabinets, instrument JB’s, Instrument tubing, instrument tubing raceways, motorized valves, pneumatic valves, level, temperature and flow transmitters, sample stations and environmental controls), log and track progress

•Review inspection electrical packages for walk-downs

•Review inspection instrumentation packages for walk-downs

•Coordinate and perform walk downs with contractors

•Perform daily quality surveillance of construction activities

•Preformed audits of contractor’s quality programs and procedures

•Experienced in quality related processes and procedures, generate/verify and sign off QA documents, (ex. Non Compliance Reports (NCR), Quality Surveillance Reports (QSR), Construction Damage Reports (CDR), and change management, Request For Information (RFI), Field Deviation Notifications (FDN), Technical Deviation Reports (TDR).

•Experienced in minor and major project completion, punch list verification and final turnover acceptance.

•Knowledge and understanding of ABSA and ANSI rules and regulations regarding Pressure Safety Valves (PSV’s), Instrument Air (A/I) and impulse/process tubing testing

•Experience in implementing of LOTO systems and all safe work procedures

•Experienced in Turnover Documentation and Completions

•Minor experience and knowledge with the mechanical, civil aspects of inspections, log quality exhibits and as-built documentation for progressing Client turnovers, (ex. Weld mapping, etc.)

•Interpreting drawings and manufacturer's specifications for the installation, calibration or repair of equipment.

•Active participation in job process improvements.

•Appropriate attendance and self-management. Performance of key job responsibilities in an accurate, efficient, courteous, and prompt manner.

•Active team membership, by sharing knowledge, cooperating and communicating pertinent information with coworkers and supervisor.

•Compliance with Employment Policy Agreements.

•Mentoring and promoting a safe work environment

Electrical and Instrumentation (E/I) Quality Control

•Supervisory experience with well-developed leadership skills

•Experience in the development and implementation of system as per ISO 9001

•Ensure all work scope is completed as per project specification/requirements, details, Quality Management System (QMS) and approve Inspection Test Plan (ITP), as well as in compliance with all governing rules and regulations, (ex. Canadian Electrical Code (CEC), Canadian Standards Association (CSA), ABSA (the pressure equipment safety authority) and American National Standards Institute (ANSI), Occupational Health and Safety (OH&S), ARC Flash 2016)

•Review as-built documentation and completed turnover packages for progressing Client turnover

•Perform daily inspections of witness and hold points and signoff of all field inspection exhibits for high, Low, and Extra low voltage electrical equipment, (ex. High, Low and Extra Low voltage switch gear (MCC), motors, VFD’s, and control circuits, electrical JB’s, overhead cranes, lighting circuits, EHT, EHT controllers, safety/isolated grounding systems/grids and generators), log and track daily progress

•Perform daily inspections of witness and hold points and signoff of all instrument field inspection exhibits for instrumentation equipment and devices, (ex. DCS and PLC cabinets, instrument JB’s, valves, level, temperature, and flow transmitters, environmental controls), log and track daily progress

•Experience in operation of a variety of testing, calibration and repair devices, tools and equipment including voltmeters, ammeters, ohmmeters, insulation resistance testers, high potential test sets, circuit breaker testers

•Uses personal protective gear such as hot sticks, respiratory protection, and places or erects clearance tags

•Review construction and commissioning schedules to focus inspection efforts

•Coordinate and assign systems to inspectors and follow up on progress

•Coordinate with contractor to resolve deficiencies in a timely fashion

•Prepare walk-downs packages for electrical and instrumentation systems

•Participate in joint walk-downs with the Client

•Perform daily quality surveillance of construction activities

•Attend inspections for testing on high, Low and Extra low voltage installations, (ex. High, Low, and Extra Low voltage switch gear (MCC), motors, VFD’s, and control circuits, electrical JB’s, overhead cranes, lighting circuits, EHT, EHT controllers, safety/isolated grounding systems/grids, transformers and generators), log and track progress

•Attend inspections for testing and calibration of all instrument and installations for instrumentation equipment and devices,(ex. DCS and PLC cabinets, instrument JB’s, Instrument tubing, instrument tubing raceways, motorized valves, pneumatic valves, level, temperature and flow transmitters, sample stations and environmental controls), log and track progress

•Develop Policies and Procedures and provide training for Client Quality Control Programs

•Experienced in minor and major project completion, punch list verification and final turnover acceptance.

•Experienced in quality related processes and procedures, generate/verify and sign off QA documents (NCR, QSR, CDR) and management of change documents (RFI, FDN, TDR)

•Knowledge and understanding of ABSA and ANSI government rules and regulations regarding Pressure Safety Valves (PSV’s), Instrument Air (A/I) and impulse/process tubing testing

•Experience in writing and implementing of LOTO systems and all safe work procedures, (ex. JSA’s, SOP’s FLHA’s, permits for general work, hot work, cold work, confined space, working from heights and gas detection)

•Experienced with PSV inspections and the ABSA requirements

•Experienced in Turnover Documentation and Completions

•Ability to interpret and develop drawings and schematics

•Coordination with vendors to solve problems identified during commissioning of Instrumentation and Control Systems.

•Interpreting drawings and manufacturer's specifications for the installation, calibration or repair of equipment.

•Active participation in job process improvements.

•Appropriate attendance and self-management. Performance of key job responsibilities in an accurate, efficient, courteous, and prompt manner.

•Active team membership, by sharing knowledge, cooperating and communicating pertinent information with coworkers and supervisor.

•Compliance with Employment Policy Agreements.

•Mentoring and promoting a safe work environment

Electrical/Instrumentation (E/I) Commissioning and Start Up (CSU)

•Ability to perform commissioning activities in large hydrocarbon processing plants, open pit mines and SAGD Facilities

•Reviewed commissioning schedule to ensure completion of commissioning requirements as per project schedule

•Prepare commissioning work packages for electrical equipment and instrumentation equipment and devices

•Coordinate commissioning assignments to ensure systems and exhibits are completed in a timely fashion

•Commissioning and Start up activities, signoff of all electrical equipment, (ex. High, Low, and Extra Low voltage switch gear (MCC), motors, VFD’s, and control circuits, electrical JB’s, overhead cranes, lighting circuits, EHT, EHT controllers, safety/isolated grounding systems/grids, transformers and generators), log and track completed systems

•Thorough understanding of control and automation systems from field devices to DCS (ex. Fieldbus, Delta V, Allan Bradley, Siemens, Modicon PLC’s)

•Commissioning and Start up activities, signoff of all instrumentation equipment and devices, (ex. DCS and PLC cabinets, instrument JB’s, Instrument tubing, instrument tubing raceways, motorized valves, pneumatic valves, level, temperature and flow transmitters, sample stations and environmental controls), log and track progress)

•Coordination and Participation in functional and site acceptance test (SAT) for the Process Control System on multiple vendor packages.

•Experience in operation of a variety of testing, calibration and repair devices, tools and equipment (ex. voltmeters, ammeters, ohmmeters, insulation resistance testers, high potential test sets, circuit breaker testers)

•Uses personal protective gear such as hot sticks, respiratory protection, and places or erects clearance tags

•Experience in writing and implementing of LOTO systems and all safe work procedures, (ex. JSA’s, SOP’s FLHA’s, permits for general work, hot work, cold work, confined space, working from heights and gas detection)

•Experience in writing and implementing of LOTO systems and all safe work procedures, (ex. JSA’s, FLHA’s, permits for general work, hot work, cold work, confined space, working from heights and gas detection)

•Ability to interpret and develop drawings and schematics

•Coordination with vendors to solve problems identified during commissioning of Instrumentation and Control Systems.

•Interpreting drawings and manufacturer's specifications for the installation, calibration or repair of equipment.

•Active participation in job process improvements.

•Appropriate attendance and self-management. Performance of key job responsibilities in an accurate, efficient, courteous, and prompt manner.

•Active team membership, by sharing knowledge, cooperating and communicating pertinent information with coworkers and supervisor.

•Compliance with Employment Policy Agreements.

•Mentoring and promoting a safe work environment

Electrical/Instrumentation (E/I) Turnover and Completions

•Ensure all documentation is completed as per project specification/requirements, details, Quality Management System (QMS) and approve Inspection Test Plan(ITP)

•Experience in planning and scheduling

•Ensure all work scope is completed as per project specification/requirements, details and approve Inspection Test Plan (ITP), as well as in compliance with all governing rules and regulations, (ex. Canadian Electrical Code (CEC), Canadian Standards Association (CSA), ABSA (the pressure equipment safety authority) and American National Standards Institute (ANSI), Occupational Health and Safety (OH&S), ARC Flash 2016)

•Thorough understanding of control and automation systems from field devices to DCS (ex. Fieldbus, Delta V, Allan Bradley, Siemens, ModiconPLC’s)

•Experience in the regulatory requirements and use of personal protective gear as required by ARC Flash 2016

•Verify and log quality exhibits and as-built documentation for processing Client turnover

•Schedule and chair meetings for turnover of sub-systems/systems, and provide information on the development and distribution of the Project Completion to the final point of approval.

•Experienced in logging and tracking the system to the final turnover, this log will include a scheduled turnover date as well as the actual date of the approved turnover, the report will also the name of the person/system champion that is approving the system turnover. The log and report will also provide a brief description of the reason for creating the revised date

•Interpreting drawings and manufacturer's specifications for the installation, calibration or repair of equipment.

•Active participation in job process improvements.

•Appropriate attendance and self-management. Performance of key job responsibilities in an accurate, efficient, courteous, and prompt manner.

•Active team membership, by sharing knowledge, cooperating and communicating pertinent information with coworkers and supervisor.

•Compliance with Employment Policy Agreements.

•Mentoring and promoting a safe work environment

Employment Experience

Heartland Contractors LTD. 2023

Electrical/Instrumentation Maintenance CNRL Horizon

DCM Group LTD. 2022

Instrumentation Maintenance CNRL Horizon

Pronghorn Controls LTD. 2022

Electrical/Instrumentation Commissioning and Startup IPL Heartland Petrochemical

PTW Energy Services LTD. 2021

Electrician maintenance CNRL Albian

Aecom Maintenance Contractors LTD. 2021

Electrical/Instrumentation Maintenance Suncor Firebag

Stuart Olson Industrial Projects. 2020

E/I QA/QC Inspector Suncor Base Plant/ MacKay River Fire Rebuild Project

Aecom Oil and Gas Division. 2017-2020

Electrical/Instrumentation Maintenance/Construction Projects at Kearl Lake

PCL Intracon Power Inc. (IBEW 424 contractor) 2016-2017

Electrical Construction at NWR

Fluor Constructors Canada LTD. 2016

E/I QA/QC contract position at Suncor East Tank Farm.

Aecon Energy Edmonton AB. 2015-2016

Electrical Construction, E/I QA/QC Inspections at the South Edmonton Mod Yard.

Husky Energy LTD. 2014 – 2015

Markz E&I Technical Services LTD (0949627BC LTD.) at Husky Energy Sunrise Project

Subcontracted to Husky Energy Calgary AB

Electrical/Instrumentation Quality Assurance Inspector at the Husky Energy Sunrise Project.

FT Services Calgary AB,2013-2014

Electrical/Instrumentation Maintenance, Commissioning and Start up (assisted with Instrument QA/QC) at the Long Lake Project.

Kentz Canada Calgary AB, 2013

Electrical/Instrumentation Installation, E/I QA/QC Inspections, Commissioning, and Start up.

MMR Canada 2012-2013

Markz E&I Technical Services LTD (0949627BC LTD),Contracted to MMR Canada Calgary AB,

Electrical/Instrumentation Walk down specialist (QA), Electrical/Instrumentation Commissioning and Start up at the Kearl Lake Project.

Fluor CanadaCalgary AB, 2012,

Sub contracted through Noramtec Consulting

E/I QA Specialist at the Kearl Lake Project.

Flint Energy Services Edmonton AB, 2011-2012

Senior E/I QA/ QC Inspector at the MEG Energy Project

Integral Energy Services LTD Airdrie AB, 2011

Subcontracted to Thyssen Krupp, for Commissioning and Start-up of the crusher and conveyor systems for the Ore Crude Two Project at CNRL

JV Driver Edmonton AB, 2010-2011

Electrician at Suncor Main Plant MNU Project

Talon Energy Services, Edmonton AB, 2010 (Self Employed contractor)

TIQ Inspector (QA), at Shell Scotford Refinery.

Flint Energy Services Edmonton AB, 2009-2010

Foreman/Lead hand Electrician/Instrumentation technician and E/I QA/QC Inspector at Shell Albian Sands Project

Ledcor Industrial, Edmonton AB, 2008-2009

Foreman/Lead hand Electrician/Instrumentation Technician and E/I QA/QC Inspector at Shell Albian Sands Project

Pyramid Corporation, Nisku AB 1990-1997 and 2004-2006

Electrical/Instrument Maintenance

Highland Valley Cooper LTD, Logan Lake BC, 2000-2004

Electrical/Instrument Maintenance

Gilead Sciences, Edmonton AB, 1997-2000

Electrical/Instrument Maintenance

Education, Training and Certification

•Journeyman Electrician Inter-Provincial Red Seal.

•Journeyman Instrumentation Technician Inter-Provincial Red Seal.

•Electrical Safety Training System (ESTS).

•Construction Safety Training System (CSTS-2020).

•Construction Safety Orientation (CSO).

•OSSA Regional Orientation Program.

•Red Cross First Aid Level C CPR/AED.

•H2S Alive

• Fall Protection Certification.

• AWP Certification..

•Arc Flash Training (Suncor in house).

•SCBA and SABA (Suncor in house).

•Trouble Shooting Course Level 1 and 2.

•WHIMIS.

•High Voltage /cable Termination Certification.

•PLC Programming/DCS Programming in Bailey, Modsoft, Concept, Allan Bradley, etc.

•Siemens, General Electric VFD Certified.

•Leadership for Safety Excellence.

•Safety and Leadership workshop.

•Safety Qualified Supervisor. (SQS)

•Alcohol and Drug Awareness .

•Imperial Oil Approved Contractor Supervisor.

Related Skills

•10 years’ supervisory experience in the Electrical and Instrumentation trade

•10 years’ experience in Commissioning and Start-up

•10 years’ experience in Electrical and Instrumentation Quality Assurance and Quality Control

•Excels in reading and understanding the Canadian Electrical Code (CEC), client/project drawings, installation details, specifications, and governing regulation (ex. Loop drawings, isometrics / general arrangements / P&IDs)

•Thorough understanding of control and automation systems from field devices to DCS, AMS (ex. Fieldbus, HART, Delta V, Modicon, Concept, Bailey, Allan Bradley, Siemens, PLC’s)

•Experience in operation of a variety of testing, calibration and repair devices, tools and equipment including voltmeters, ammeters, ohmmeters, insulation resistance testers, high potential test sets, circuit breaker testers

•Uses personal protective gear such as hot sticks, respiratory protection, and places or erects clearance tags

•Experience in writing and utilization of the following procedures; lock out tag out (LOTO), management of change (MOC) and standard operating procedures (SOP)

•Working knowledge of CAN/ULC standards S524, S536 and S537;

•Experience in planning and scheduling

•Extremely goal and detail orientated

•Ability to develop successful professional relationships and become a team player as a sole contributor within the team

•Implementation and redesign of computer record keeping systems.

•Knowledge of ABSA and ANSI rules and regulations for the testing of PSV’s, Instrument Air tubing and instrument process tubing

•Provide support to the Maintenance & Reliability team by providing input into Electrical Equipment Asset Care Plan strategy

•Strong interpersonal, analytical, trouble shooting, organizational skills

•Experience in computerized turnover systems (ex. MC Plus)

•Experience in computerized scheduling software (ex. Primavera 6 and MS Project, SAP,Maximo), Ebassets

•Experience in MS Office suite software programs, Excel, Power point and Outlook, InTools, AB ControlLogix, CompactLogix, Panelview HMIs, Wonderware Intouch HMI,

•Experience with nuclear devices, installing and calibrating HPLC’s and environmental controls

References supplied upon request.

Contact this candidate