CAREER OBJECTIVE

I am having ten plus years of experience as a QA/QC Inspector in Oil and Gas Refinery projects in Bahrain, Kuwait and India. I am an expert for resolving problems and improving client satisfaction. My experience includes establishing and maintaining quality control standards, ensuring safety regulations are followed, and preparing status log and detailed reports. I have also developed a comprehensive system f or tracking and recording project progress. With my extensive knowledge of both the technical and administrative aspects of quality control. I am confident that I can provide the highest level of quality assurance and control as per the Project standards and specification.

EDUCATION QUALIFICATION

Bachelors of Engineering in Electrical and Electronics Engineering Vins Christian College Of Engineering -Tamil Nadu, India June 2012 to April 2015

Diploma in Electrical and Electronics Engineering

Morning Star Polytechnic College - Tamil Nadu, India June 2008 to April 2011

CERTIFICATE

IECEX_CERTIFICATE NO: IECEx CP CTE23.0094

BMP BAPCO Project Approval CERTIFICATE No: EML-JVS-NSH4-2361 CFP KNPC Project Approval CERTIFICATE No: JGSK-KNPC- CFP-MAA-L-18-31137 WORK EXPERIENCE

QC Inspector Electrical

Company: Nasser S. Al-Hajri Corporation, Sitra

Project: BAPCO Modernization Program (BMP), Sitra, Bahrain September 2021 to Present

Conduct thorough inspections of electrical and instrumentation materials to ensure compliance with specifications, standards, and project requirements.

Verify materials' suitability for hazardous zone classification and gas groups.

Review Inspection & Test Plans (ITPs), Checklists, and RFIs.

Ensure equipment suitability for Hazardous Zone Areas (Zone 0, Zone 1, and Zone 2) and gas groups.

Ensure that E&I construction work complies with the approved Quality Control Plan (QCP) and relevant standards.

Supervise the installation of power, Intrinsically Safe (IS), and non-IS cables on trunks or trays.

Oversee the installation and functional tests of motors, Local Control Stations (LCS), Emergency Shutdown (ES) systems, lighting, and small power systems.

Oversee the installation and testing of substation switchgears, transformers, Diesel Generators (DG), Emergency Main Control Stations (EMCS) panels, and Industrial Receptacle Panels (IRP).

Witness continuity tests, insulation resistance tests, Monitoring (CRM) tests, and bolt torqueing activities. EDWINPAUL VINCENT

+973********

# ad25a6@r.postjobfree.com

ï https://www.linkedin.com/in/edwinpaulvincent/

IECEx E&I QC Engineer/Inspector

Duties and Responsibilities of current project roles:

Participate in root cause analysis and implement corrective and preventive actions. Contribute to continuous improvement initiatives for E&I processes.

QC INSPECTOR ELECTRICAL & INSTRUMENTATION

Company: Nasser S. Al-Hajri Corporation

Project: KIPIC Al Zour Refinery Project, Al Zour, Kuwait Period: May 2019 – Apr 2021

Duties and Responsibilities of project roles:

Implementation of QA/QC activities in accordance with approved QCP, ITP, Procedures, method statements and other contract documents.

Responsible of E&I and EICS installation & inspection activities on the Site.

Installation & inspection of instruments, electrical equipment’s and panels.

Closely monitoring project schedule and progress, alert project management for potential delays and quality issues to avoid rework and cost of poor quality.

Conduct material receiving inspection, cabinet installation inspection, cable laying inspection and fiber optic cable installation inspection as per ITP.

Monitoring, review and inspection of all major activities and progress of the E&I construction works.

Witness and certify electrical, control cable tests and OTDR tests for FO cables.

Responsible for the power systems motors installation, Solo run tests and precom.

Perform & Monitor technical inspections during Site/Factory Acceptance Tests for main electrical components such as Power, Distribution and Measurement Transformers, MV and LV Switchgears, Power and Telecommunication / Instrumentation Cables, MCCBs, PLC, MCC, LCC panels. QC INSPECTOR ELECTRICAL & TELECOMMUNICATION

Company: Nasser S. Al-Hajri Corporation

Project: KNPC's Clean Fuels Project,Ahmadi, Kuwait Period: Aug 2017 – May 2019

Duties and Responsibilities of project roles:

Responsible for the over-all implementation of Quality control related electrical works accordance with project specifications and Engineering standards.

Monitor daily inspection activities and verifies compliance to KNPC Standards (DEP), National Electrical Codes, IEC.

Perform routine inspection as per NFI, ITP, QCP, Project specifications & approved drawings.

Handled the Inspections of installation, testing & commissioning of Power Transformers, Beam pump well motors, MV/LV Switchgears, Motor Control Centers, Distribution boards, etc.

Handled the Inspections of installation, testing & commissioning of Cathodic protection systems MG,Tube,Mess Anodes and ICCP.

Preparation of calibration, installation acceptance, testing and commissioning reports.

Periodic inspection of installation routes and cable support systems prior to cables.

Monitor and update JGSK Thomas systems, Prepare review and submition of Hand over documents. QC INSPECTOR ELECTRICAL

Company: Fathima Engineering Co Pvt ltd - Calicut, Kerala Period: June 2015 to August 2017

Duties and Responsibilities of project roles:

Verify electrical wiring to make sure all wiring works to be completed correctly.

Inspect, test or measure PBT equipment and materials at the time of delivery to ensure their conditions.

Review and manage quality control records and documents.

Report inspection results.

Comply with all regulatory standards and requirements such as, applicable laws, regulations and company policies.

Monitor the installation and testing of electrical systems to ensure compliance with approved plans and specifications.

Conduct pre-inspection meetings with contractors and other stakeholders to communicate quality control requirements and expectations.

Maintain up-to-date knowledge of industry standards, regulations, and best practices related to electrical quality control.

Effectively coordinating a number of projects simultaneously.

110/33KV,33/11KV,33/6.6KV,11/0.415KV,6.6/0.415KV Power.

Transformers, Switchgears and Bus duct.

HV/LV Motors. Lighting System, Small power distribution, UPS. Plant Earthing Installation

HV/LV Power, Control and Communication cables Installation.

Cathodic Protection system underground pipe line and Metal tanks, Installation of Mg Anodes, Tube Anodes, Mesh Anodes, Ref Anodes.

ICCP Systems (Test station, JB Positive Negative cables)

Perform & Monitor technical inspections during Site/Factory Acceptance Tests for main electrical components such as Power, Distribution and Measurement Transformers, MV and LV Switchgears, Power and Telecommunication / Instrumentation Cables, MCCBs, PLC, MCC, LCC panels.

Electrical heat tracing system Installation and SAT Performed for process areas. PROJECT SKILLS

Familiar w Familiar with international Codes and Standards (QCS, NEC, IEC, IEEE, Shell DEP, BMPS, etc...)

Knowledge about Shell DEP Standards.

Knowledge about Bahrain BMPS Standards.

Knowledge about IECEx (60079-14, 17) Ex1, Ex3, Ex4, Ex6, Ex7, Ex8.

Knowledge about Hazardous area Classification.

Substation Equipment Installation, Testing and pre commissioning.

Supervisory Maintenance and Construction Activities.

Supervisory of SAT, Pre-loop, Final loop and Functional tests.

Fall-of-Potential Test.

Insulation resistance (IR).

Continuity Test.

High Potential Test.

Polarization index (PI).

LCS Function Test.

Motor Solo Run, Vibration and speed

Heater Function Test.

Transformer Testing, Oil Testing,

Winding resistance, Turns ratio test, Vector group test. DECLARATION

I hereby declare that all the information is true and believed to the best of my knowledge. I hope you will consider my Resume and my ability.

Place: Bahrain

Date: 15-Jan-2024 EDWINPAUL VINCENT

TESTING KNOWLEDGE

ELECTRICAL SUPERVISOR

Fathima Engineering Co Pvt ltd - Calicut, Kerala

June 2011 to August 2012

Duties and Responsibilities of project roles:

Reports to the Maintenance Supervisor on all issues relating own responsibilities.

Exhibits and maintains excellent working relationships with all staff.

Coordinating and directing the work of others.

Working from blueprints, plans, and sketches; estimate materials and time needed to complete jobs; use hand and power tools.

Knowledge of industry standard electrical codes and regulations.

Plans or lays out work details in the assembly, installation, testing maintenance, and repair of a wide variety of electrical apparatus, control equipment and wiring used in industrial, light and power distribution system.

Dealing with a variety of people in a professional, courteous manner in diversified situations. CAREER HIGHLIGHTS

Handled the Inspection on Installation, Testing and Pre-commissioning of following activity’s

Contact this candidate