BRIAN NORREGAARD

** ****** ***.

LOWELL, MA *****

978-***-****

E-MAIL: ad20s8@r.postjobfree.com

OBJECTIVE: To secure a challenging position with potential growth and advancement.

EDUCATION: ITT TECHNICAL INSTITUTE

Electronic technology program.

WALTHAM VOCATIONAL HIGH SCHOOL

Drafting and design.

SKILLS: MANUFACTURING SPECIALIST

Solid leadership and communication ability.

Strong computer knowledge, word, excel, power point, oracle.

Proficient with various test equipment.

Proficient in all manufacturing and production areas.

Excellent problem-solving aptitude.

EXPERIENCE: DCS CORP.

10/18 to present Littleton, ma.

Position: ELECTRONIC TECHNICIAN III / QUALITY CONTROL

Duties include Quality control and testing of cable and system assemblies and sub-assemblies of communication emergency stop systems for autonomous vehicles. Originating and Generating test and assembly processes and procedures for all box build assemblies for the production lines. Testing and Programming and of radios and control systems. Testing of complete systems to ensure safety and quality product for the customer. Originating and generating test programs and procedures for VSWR, return loss, Insertion loss and HI POT test operations. IPC-610 CIS certified, IPC-620 CIS certified, IPC-600 CTS certified.

10/17 to 10/18 MKS CORP.

Andover, ma.

Position: CALIBRATION TECHNICIAN II

Duties included calibration and tuning of Baratron capacitance manometers with the use of oscilloscopes,

Multi meters and signal conditioners.

06/17 to 09/17 ASSURANCE TECHNOLOGY CORP

Chelmsford, ma.

Position: TEST TECHNICIAN

Responsible for the assurance testing of electronic components. Utilization of various electronic and environmental Test equipment and chambers. Voltage conditioning, dialectic withstanding voltage, fine and gross leak detection, outgassing, Various extreme testing to ensure the life and condition of various electronic and microwave components.

05/16 to 01/17 EXERGEN CORP.

Watertown, ma.

Position: TEST TECHNICIAN

Responsible for the troubleshooting and repair of IR thermometers and scanners from production and

Customer returns. Troubleshooting and repair of various test equipment and cable assemblies for production.

Calibration of digital thermometers for black bodies used in production testing areas. The complete wiring and assembly of black bodies from engineering documentation and wiring diagrams. Verification testing of new production Design in extreme environmental conditions. Chemical testing and documenting results on body housings for Deterioration and corrosion. Electrical repair of pallet connector ventilation system. Assisted in the assembly of wiring and pneumatic assemblies of a new pallet connector design from engineering sketches, documentation and instruction.

04/15 to 01/16 EDA/ANALOG DEVICES

Chelmsford, ma.

Position: MICROWAVE TEST TECHNICIAN

Responsible for the set-up, calibration and operation of various microwave test kits.

Utilization of test equipment power meters sensors and supplies, signal generators, noise and

Spectrum analyzers, Power sensors, supplies and meters. Operation of ISMECA TEST HANDLERS NT16,

NX16, NY20 and multi testers all from set up diagrams engineering notes and sketches

03/13 to 04/15 COMMUNICATION AND POWER INDUSTRIES

Beverly, ma.

Position: MICROWAVE/HIGH POWER TEST TECHNICIAN.

Responsible for the set up and calibration of various microwave test equipment.

Testing and tuning of high-power MAGNETRONS with the proper use of various test equipment.

Oscilloscopes, Wave amplifiers, Spectrum analyzers, pulse counters, Multi meters, Pulse repetition meters,

Power meters, Volt/Amp meters, Vac-ion pumps, Degaussing, RF signal generators, frequency meters. All from Test specifications, Customer drawings and engineering sketches. DOD SECRET CLEARANCE

OBTAINED

01/07 -03/2013 BAE SYSTEMS

Nashua, NH

Position: OPTICLE TEST TECHNICIAN II / MECHACLE TECHNICIAN II

Duties included the set up and operation of various optical test equipment. Certified on a

Class 4-3B ZYGO INTERFEROMETER For the proper placement and alignment of optical lenses.

Worked on the TIM 1500, LASER TARGETIG MODULES, AND THERMAL WEAPON SIGHTS

Both complete assembly and testing of units per process and engineering documentation. Loading and monitoring ESS chambers daily from data sheets and test specifications. Disposition and routing of non-conformant materials to be reworked and repaired. Other duties included compass calibration, range finding, vibration, Gun fire, leak and pressure testing. DOD SECRET CLEARANCE OBTAINED

7/06-1/07 PHOTO ETCH TECHNOLOGIES

Lowell, ma.

Position: CAD/CAM TECHNICIAN

Duties included generating lay outs of silk screen stencils and inspection templates to

Be cut by laser technology. The proper use of the cad cam system using customer documentation and Gerber files. Set up and the operation of the laser system creating and sending programs to ensure quality product.

9/05-7/06 PROTO PAC ENGINEERING

Wilmington, ma.

Position: SHIFT SUPERVISOR / PROGRAMMER

Duties included the supervision of the manufacturing lines.

Ensure all raw materials and documentation is available for production operators to meet production schedules. Insure seamless transition of production from second shift to first. Provided second shift production performance reports to management. Conducted off hour customer shipments as required.

Other duties included generating and loading of programs for my data, aoi mirtech and the cs 400 manual insertion. Generated and created work procedures, visual aids, production flow charts. Other duties

included all phases of inspection and new product line set up and documentation.

5/04 -09/05 SUNTRON CORP.

Lawrence, Ma.

Position: QUALITY TECHNICIAN III

Duties include all aspects of smt and thru hole printed circuit board inspection.

Incoming, Final, In process and X ray.

RMA coordination and the proper use of inspection equipment Calipers,

Vernier, Micrometers, Pin gauges, microscopes.

Proper reading of blueprints, assembly dwgs. and visual aids.

IPC-610 CERTIFIED

09/02 – 01/04 BENCHMARK ELECTRONICS INC.

Hudson, N.H

Position: GROUP LEADER / QUALITY TECHNICIAN III

Responsible for overseeing the proper operation of three production lines.

Assigning duties and providing training for all team members on the lines.

Scheduling tasks and charting progress and activity on a daily basis.

Ensure all procedures are followed and new procedures are implemented.

Other responsibilities include Final, in process inspection and 5dx x-ray.

IPC-610 CERTIFIED.

01/04-05/04 CELESTICA

02/02-06/02 PRODUCTION SPECIALIST

All aspects of printed circuit board manufacturing, machine operation, final and

Incoming inspection, in circuit testing, Mechanical assembly. Also responsible for investigating and solving Production gates in the functional test areas to ensure on time delivery, workmanship,

Quality and customer satisfaction.

02/01-06/01 JABIL CIRCUIT INC.

Billerica, MA.

Position: CELL AND RMA GROUP LEADER

Duties included maintaining production schedules and quality of work.

Assign duties and provide schedules, training for operators, insure all procedures

Are followed and new procedures are implemented. Facilitate daily meetings with all

Team members to discuss issues pertaining to quality and customer satisfaction.

Prepare reports charting the progress of the line.

10/98-02/01 SOLECTRON CORP.

Westboro, MA.

Position: PRODUCTION COODINATOR / MACHINE OPERATOR III

Duties include maintaining production schedules and quality of work.

Assign duties and provide schedules, training for operators and leads.

Ensure all procedures are followed and new procedures are implemented.

Facilitate daily meetings with operators to discuss issues pertaining to

Quality. Assisting in expediting the flow of materials from warehouse to the

Lines. Prepare reports charting the progress of the lines. Serve as a liaison

between production managers, manufacturing engineers, Q.A. and

warehouse supervisors.IPC-610 CERTIFIED

7/95 – 10/98 ACT MANUFACTURING

Mansfield, ma.

Position: PRODUCTION COODINATOR

Duties included set-up and the proper operation of five complete

Fuji smt lines. Working with the F4G program to ensure proper component

Identification and placement. Teaching of programs of AP and MPM screen printers for proper board position and solder paste placement. Auditing of all Q.C. and evaluation areas for following proper

Processes and procedures.

PRODUCTION COODINATOR

Duties included the leading and the training of a fifteen-person team in

Electronic-mechanical hard drive assembly for EMC Corporation.

New line set-ups, time studies and cycle counts. Certified as a qualified

Trainer, product maintenance and assembly of air traffic controllers and modems for MOTOROLA CORP.

IPC workmanship standards, basic electronics, and component identification.

REFERENCES: Furnished upon request.

Contact this candidate