KOKILA SUBRAMANIAN

Cell: (***) *** - **** Email: ad1y2h@r.postjobfree.com

LinkedIn: www.linkedin.com/in/kokila-subramanian-072921ab Location: Michigan, USA Career Summary

Over 4 years of advanced research experience in areas of Electronics/Electrical Engineering, Wireless Telecommunication, IoT, and Web Application Development.

Over 3 years of experience in design, development, analysis & testing of Software for Embedded Platforms.

Over 3 years cummulative experience in C, C++, AUTOSAR -BSW, RTE & Application layer services. Work experience in Vector DaVinci Configurator / Developer.

Work experience in design of embedded system with Classic & Adaptive AUTOSAR, MATLAB, and Simulink.

Work knowledge in ADAS software coding standards and MISRA guidelines. Designed, validated control algorithms that met functional, regulatory, safety requirements as per ISO 26262.

Designed and developed AUTOSAR (Classic & Adaprtive) services, configured ECU components and Complex Device Drivers (CDD) in C. Collaborated on developing AUTOSAR - ARXML file creation.

Work experience in common peripheral buses - SPI, I2C, CAN, LIN, Ethernet & UART. Hands on experience in designing and developing RTOS using FreeRTOS, and VxWorks.

Successfully debugged HW-SW interfacing issues, did root cause identification using JTAG, oscilloscope, & logic analyser.

Worked with a cross-functional team, for developing, capturing requirements for customer interfacing features and technologies. Translated requirements into control system designs to achieve program targets.

Successfully performed code level integration tasks - Replicating build environments, source code debugging, and continuously improving, streamlining deployment process.

Collaborated, developed & applied software validation & verification test methods, tools, and processes to ensure system functionality and robustness.

Developed system plant modules and HIL & SIL validation infrastructure to support vehicle program.

Hands on experience in design, development of : SoC (System on Chip) and processing cores - MPU, MCU, DSP including Altera FPGA, Xilinx Nexus 4 FPGA boards, and Infineon AURIX Multicore CPU.

Have good understanding of Software Development Life Cycle (SDLC). Worked in control system project planning, program management for functional, quality, & timing objectives.

Worked on developing user Interface applications, software integrations, and development of high transactional & scalable applications for integrating embedded firmware and UI/UX design.

Possess proficiency in analyze designing & debugging of programming languages -C, C++, and Python.

Analyzed system flows, data usage and work process, using Agile and waterfall principles.

Capable to work under pressure & adapting to dynamic changes in work. Possess Good Time Management skills, communication skills, project management and effective teamwork skills.

Collaborated with product owners, and stakeholders to clarify requirements, and specs and created automated functional and unit tests. Created technical designs for application features and documentation. Education

Masters in Embedded Systems Oakland University,USA (Graduation-2023) GPA-3.80/4

Masters in Electronics & Communication Engg., Pondicherry University, India (Graduation-2012) GPA–3.91/4

Bachelors in Electronics & Communication Engg. Pondicherry University, India (Graduation-2010) GPA–3.75/4 Technical Skills

Programming Languages C, C++, JAVA, Python (Basics), VHDL, Assembly Modeling/Simulation Tools MATLAB, Simulink, Simscape, Classic & Adaptive AUTOSAR, Visual DSP

++, LabVIEW, PSpice, OPNET, NS2

IDEs & Build Tools Eclipse, Visual Studio Code, Arduino IDE, ARMKeil, Webstrom, JTAG Web Develpoment HTML5, CSS, Angular, React.JS, Node.JS. Databases DOORS, AWS, SQL, MySQL, MongoDB

Methodologies & Version Control Agile, Scrum, Waterfall, GIT,GitHub, BitBucket, GitLab, JIRA Testing / Debugging Tools BTS Embedded Tester, Simulink Test, Polyspace Microsoft Tools MS Office, Microsoft Project, Visio, Microsoft SQL Server, Azure Operating system Linux, RTOS, Windows, and MAC

RTOS FreeRTOS, VXWorks,ThreadX

Assembly Language Microprocessor (8085), Blackfin processor (BF533) Professional Summary

Software Engineer, Kalpra Tech Solutions, TX, USA May’23-Till Now Client: Zhongding Group, MI, USA

Worked in design, development, analysis & testing of Software for Embedded Platforms. Worked in Vector DaVinci Configurator / Developer. Designed embedded software solution with ETAS, and AUTOSAR.

Designed and developed AUTOSAR (Classic & Adaprtive)services, & Complex Device Drivers (CDD) in C.

Work knowledge in ADAS software coding standards, MISRA guidelines, best practices.

Designed, developed and maintained software for real-time embedded platform focusing on user interactive display modules.

Collaborated with client and product design team to implement critical product features and functionalities, focusing on real-time performance, reliability and efficiency.

Collaborated on developing AUTOSAR software components, ARXML file creation. Designed, validated control algorithms that met functional, regulatory, safety requirements as per ISO 26262.

Developed verification software in C/C++, performed coding, Unit & Regression testing.

Utilized VxWorks RTOS to build and optimize embedded system performance requirements. Worked on designing and developing FreeRTOS, and VxWorks device drivers in C.

Worked in designing parallel system with shared memory and distributed memory and implemented speed-up performance mechanism.

Implemented and debugged inter-device, inter –processor and peripheral communication including Bluetooth Low Energy, SPI, I2C and UART communication.

Implemented and tested embedded software, interpreting error reports and resolving issues promptly.

Applied bug fixes and optimized system performance with 20% improvement in system stability and efficiency. Graduate Research and Teaching Assistant, Oakland University, MI, USA Sep 21’- April’23

Research focused on embedded processor and digital system using C, VHDL and Assembly level programming language.

Worked with other research and graduate scholars on team project involving Arduino–UNO, Atmega 328 Microcontrollers, and V models for automobile using LabVIEW.

Developed autonomous driving system model with compliance with ISO 26262 standard using AUTOSAR.

Implemented Plant Model, Software and MI-MO system Design using MATLAB/Simulink/State flow.

Prepared coursework action plan, developed engineering material that satisfy course objectives, delivered lectures for undergraduate and graduate courses.

Conducted group discussions, laboratory sessions, to impart experimental knowledge in the field of Electronic Circuits, Advanced Communication, Embedded systems programming.

Prepared course evaluation on grading assignments, examinations and lab reports. Guided undergraduate student projects on cutting edge technologies: Internet of Things (IoT), Micro-Electromechanical System (MEMS).

Gained hands-on experience in working and testing with advanced signal generators and measurement scopes. Research Engineer, Pondicherry Engineering College, India Nov’14- Mar’20

Implemented design and development of QoS improvement, Resource Provisioning, and Mobility management protocols for Interworking Heterogeneous Wireless Networks.

Successfully written and presented thesis on Investigations on Hybrid Coupled UMB-WIMAX-WLAN Internetworking with QoS Provisioning Framework.

Successfully developed and validated algorithms using application tools such as OPNET, NS2, MATLAB, for potential interworking heterogeneous wireless networks.

Designed, developed and implemented a structured heterogeneous interworking wireless network and data center to provide 5G service with QoS improvement.

Gained knowledge on IP, WLAN, WiMAX, Nodes, switches, wireless controllers and router configuration to enhance wireless services.

Implemented User Interface Web application for monitoring coverage, quality and speed of network for End-user mobile devices using HTML5, CSS, JavaScript, and NodeJS.

Sucessfully published technical papers in 6 peer-reviewed journals and presented at 5 international conferences. Assistant Professor, Christ College of Engg. & Technology, Puducherry, India June’12- Sep’14

Delivered lectures for undergraduates and graduate students on subjects including Embedded System Design, Digital Communication, Electronic circuits and Devices, Integrated circuits and Digital Signal Processing.

Prepared curriculum action plan, crafted engineering material to meet course objectives, and delivered lectures for both undergraduate and graduate courses.

Conducted group discussions, laboratory sessions, and laboratory studies and impart experimental knowledge in the field of Electronic Circuits, Advanced Communication, Embedded systems programming.

Graded assignments, examinations, lab reports. Guided undergraduate student projects on cutting edge technologies: Internet of Things (IoT), Micro-Electromechanical System (MEMS), Optical circuits.

Supervised senior year research projects including Advanced Wireless Communication, Embedded System Design and Electronic Circuits and Design.

Conducted workshops and seminars on emerging topics in Electronics and Computer Engineering. Notable Academic Achievements

Pondicherry University Gold Medalist “2012 – State level Topper in M.S(ECE) in 2010-2012

Awarded National level INSPIRE Fellowship of amount $20,000 from Department of Science & Technology, New Delhi, India, towards advanced research.

Selected at State level Fellowship Research Program at Indian Institute of Technology-Madras, India.

Published research activities in 6 peer-reviewed journals and presented in 5 International Conferences.

Contact this candidate