Project Manager 3D Modeling
Resume:
Joseph A. Sanchez
*************@*****.***
Albuquerque, NM 87123
Cell: 505-***-****
Land Line: 505-***-****
JOSEPH A. SANCHEZ PROFESSIONAL RESUME
EDUCATION
August, 1999-2001
New Mexico State University
Studied Engineering Technologist Electrical and Mechanical while working at the Physical Science Lab at New Mexico State University.
NM-Las Cruces
May, 1995-97
Technical Vocational Institute Certification
Albuquerque, NM
Associates Degree/Technical Certificate: Drafting and Design, Electrical and Mechanical Systems March, 2021
GB-2 NM Contractor’s License
SKILLS & TRAINING:
Architectural Residential & Commercial Plans. Drawing Samples upon request.
ISO 9001-2008 through 2015 Quality Management System, Year 2014 through 2018 at Wagner Equipment
ISO-9001:2000 Quality Management System: Year 2001 & 2002 at Neuroscan Labs
AutoCAD: 1990 to Present
Autodesk Inventor 3D Modeling: 3 years, 2015-2017
Solid Works 3D Modeling: 3 Years, 2001-2003
Solid Works 3D Modeling: Yr. 2019 to Current
Pro E 3D Modeling: 2 Years 1998-99
PCB Orcad Design & Layout: 5 Years 1990-95
Microsoft Projects, Powerpoint, Excel, Word
MRP System: 2001 to Present
Lean Operation Training
Lufkin Gear Engineering School
FMC Pump Engineering School
Gas Compressor Class 101
Employment History:
ALPHA SOUTHWEST, Impel Company
June 2023 to Current
Position:
Pump Applications Sales:
Size Vertical Turbine Pumps (VTP) per customer specifications.
Develop Pump System Curves
Troubleshoot existing Well Pumps for Municipalities through out New Mexico, including Albuquerque Water Authority.
Create Technical Proposals for Municipality Customers. Project Manager:
Sold jobs are handed off to a Project Manager
Execute Projects and work directly with customer project managers.
Control budgets, invoice customers.
Create Quality Processes for the pump installation division, pump rebuild division, and electric motor rebuild divition.
Product Designer:
Operating Solidworks and Autocad creating weldment and structural details for fabrication.
BARNETT ALDON IRONWORKS
June 2021 to be Feb 2023
Position:
AutoCAD and SolidWorks Designer
Solidworks Modeling for various complicated Ironwork Products that require further details such as mass properties, COG, Submittals for customer product rendering.
Autocad: Design customer Gates, Rails, and Security Doors. Create Plasma Cut Designs, operate Dynatorch. Also nest into a software called ProNest. Sales Representative
Meet with customers and provide estimates for Security Doors, Gates, Gate Operators, Railings.
Facility Maintenance and Troubleshooting
Dynatorch Plasma Cutter: Edit Programing, service and provide maintenance.
Service and Troubleshoot Powder Coat Oven Controls, such as VFD, PID Programing, change out relays,
Service Powder Coat Booth Controls and Ventilation System Global Package Solutions, Inc.
March, 2018 to April 2021
Position:
Product Sales
Project Manager for custom manufactured equipment for the oil & gas and petro- chemical industry.
Designer and Drafting creating P&ID’S, wiring diagrams, mechanical details & assembly, fabrication drawings
Provide support to the sales department inquiring quotes from sub-suppliers and estimating.
Prepare estimates for customers for fabrication and assembly working with manufacturing shops in Bloomfield NM, Midland & Odessa TX and Houston TX.
Solid Works Designs for:
MCT Industries
Southwest Composites
Southwest Prototyping
Wagner Caterpillar, Power Systems Division
February, 2014 to January, 2018
Position: Project Engineer/Project Manager and Field Engineer
Project Management following companies ISO 9001-2015 Quality Management System. o Internal Auditor, 3 years
o Develop Processes and Procedures, 3 years
o Improving QMS, 3 years.
Designed and integrated pump packaged Engine Driven and Electric Motor Driven.
Controls design using Allen Bradley and Siemens PLC’s.
Field Engineer, commissioning Oil and Gas Pump Package Systems. o Pump Skid Installations
o Conduct pump, gearbox, engine alignments
o Conduct equipment pre-check requirements for start-up. o Interface site piping to pump skids.
o Interface control panels to customer’s DCS,SCAD systems. o Prepare String Test using Wagner’s above and below pump recirculation tanks.
Supported the Sales Dept. preparing pump project proposals & estimates, respond to technical clarifications and visited with customers.
Responsible for all procurement, supplier quotations, supplier engineering submittal approvals, and purchasing.
Create estimates for fabrication and construction. Compressor Systems, Inc.
9/2011 to 1/2014
Position: Project Manager
Compressor System Inc. is the parent company of PSI. Transferred to Midland, TX Branch Same job responsibilities as PSI.
Pump Systems International (PSI)
Division of Compressor Systems, Inc.
11/2003 to 9/2011
Position: Project Engineer
Prepare estimates to fabricate, assembly and install packaged equipment. Such as customer P&ID’s, Weldment Details, Wiring Diagrams, Package General Arrangement proposal drawings, Piping Drawings.
Designed Packaged System for pumping petroleum products using an Engine or Electric Motor to drive a Pump suitable for Zone 1, Zone 2 and Safe Area.
Integrated Pyroban Water Cooled Exhaust Systems
Designed enclosures over pump skids
Integrated Piping Skids, SS pipe routing, P&ID’s.
Integrating Control Panel I/O’s for Engines, MCC’s VFD’s, Switchgear, Aux Motors/Heaters/Instruments.
Mechanical Integration for Starting Systems, Cooling Systems, Fuel Systems.
Packaged System Consists of equipment mounted on a common I-Beam Skid: 1. Diesel or Gas Engine Driving a Pump with a Gear Increaser or Reducer such as a Gearbox.
2. Engine driven Fire Pumps for offshore platforms consist of Diesel Engine with Right Angle Gearbox and Vertical Shaft Submersible Impeller Pump. 3. Electric Motor Driven Pump Packages.
Prepared Shop Facility Manufacturing Plans/Procedures to Fabricate, Assemble and Test Pump Packages or Piping System.
Over-see Production and Fabrication assuring QC Inspection & Test Plans are followed.
Create Operating Philosophy, Control Logic, Cause & Effect Matrix, and FAT Procedures.
Implement Engine Control Systems (CAT. Waukesha, Detroit), Electric Motors, MCC’s, VFD, Fire Suppression Systems, Pyroban Exhaust & 3GP ATEX Systems into a PLC Control Panel.
Work with Drafters to design skids, equipment mounting systems, over-head structures, piping spools used for shop drawings.
Work with Drafting to integrate/develop a pump package P&ID and General Arrangement Drawing.
Designed testing loops to conduct a full load water recirculation test for pump package system. Pumping water at the operating conditions and testing the controls of a pump package system.
Attend Startups and commissioning of pump packages to assist with technical support.
Prepare Start Up and Commissioning Scope of Work for Commissioning Engineers.
Oversee and Coordinate Shipping Logistics with Freight Forwards, such as export boxing, inland transportation, and exportation & Importation of equipment.
Knowledgeable of US Customs Laws and International Law for import/export.
Create RFQ’s, track cost, issue purchase orders and operate an MRP System.
Create Production Orders, Shop Schedules, Gantt Charts.
Extensive Customer Interface during the project, such as answering technical clarifications, preparing project schedules, weekly progress reports.
Invoiced customers per progress payments.
Knowledgeable of all commercial aspects, such as preparing Letter of Credits, customer invoices, Commercial/Proforma Invoices, Temporary Importation Bonds.
Prepared Bid Proposals and Costing for new pump packages complying customer specifications and requirements.
Attended Tender Pre-Bid Meetings, Kick off Meetings, Technical Clarification Meetings.
Prepare String Test (FAT) Requirements, Such as Recirculation Piping Designs, Structural Layouts, Utility & Power Requirements, proving out System Pump Package Operating Conditions and Coordinate the Complete Acceptance Test.
Responsible for all procurement, supplier quotations, supplier engineering submittal approvals, and purchasing.
Prior to above, I lived in Las Cruces, NM. I took many classes at NMSU for Engineering Technology while working at the Physical Science Lab at the University. I was one of their Drafting Technicians.
Contact this candidate