Jeannie A. Harper, B.A.

Fort Worth, Texas *****; USA; Email: ad1nsh@r.postjobfree.com

Cellular: 832-***-****

SUMMARY:

Experienced with emergency processes, industrial and manufacturing productions within engineering, health, safety, and environmental programs, including OSHA PSM and EPA RMP programs and working industry standards PLC engineering, project management, Finance and strengthening observances with leadership and corporate ethics. Competence to perform at all levels of the organizations.

Proficient with management of change (MOC), risk analysis (RCA), safety training (JSA/JHA), and hygiene management, skilled with federal and state regulations to maintained preventative measures for quality manufacturing, productions site utilizing programs OSHA, MSHA, TDI.

Proficient with variety of software - SAP, SharePoint, Microsoft Office 365, data analytics, KPIs, audits and safety, environmental inspections, and risks assessments.

Member of ASSP – American Society of Safety Professionals

EDUCATION:

Emergency Management Disaster Studies Masters, University of Texas Rio Grande Valley, Edinburg, TX (current)

Safety Management Bachelor Arts and Sciences, University of Houston-Downtown, Houston, TX (completed)

Electrical Distribution Power Technology Associate, Texas State Technical College, Waco, TX (completed)

CERTIFICATIONS:

The National Environmental Trainers DOT Hazardous Materials Transportation

Houston Area Safety Council in OSHA Basic Plus 10, 30, 40 HAZWOPER

OSHA Standard 29 CFR 1910.38 - Regulations & Evacuation Emergency Planning

OSHA Standard 29 CFR 1910.95 - Hearing Conservation

OSHA Standard 29 CFR 1910.134 - Respirator & Respiratory Supplied-Air

OSHA Standard 29 CFR 1910.146 - Permits Writing Confined Space

OSHA Standard 29 CFR 1910.147 - Lockout Tag Out

OSHA Standard 29 CFR 1910.178 - Forklift Operation, Load Stability, Vehicle, Pedestrian & DOT (FHWA & FMCSA)

OSHA Standard 29 CFR 1915.504 - Fire Watch/Hole Watch

OSHA Standard 29 CFR 1910.1030 – Blood Borne Pathogen

CPR, Automated External Defibrillator, Emergency Floor Warden Safety, ADA

Shell University 30hrs, 501 OSHA, Behavior Based Safety and Environmental Training (Shell Certification)

Incident Command System & National Incident Management System – 100, 200, 230, 241, 700, 800, etc.

SKILLS/SOFTWARE:

Health, Safety & Environmental - Shell FIM HSE (IMPACT-IHS), ExxonMobil SSHE (IMPACT- IHS), ISNetWorld, KMI, First Advantages, Origami, Velocity, TCEQ/STEERS - Tier Two reporting, Scorecards, SDS (eBinder), MSHA/OSHA, NFPA, and EPA, Risk Assessments

Finance – Several ERP programs, SAP (ABAP/4), SERP, JD Edwards, SAP-Odyssey, ORACLE, EPICOR, Sarbanes Oxley

Standard Tools - Microsoft Window Office - Excel, PowerPoint, Word, Power Bi, & Access, MS Projects, Publishing, Marketing

Planning/Reporting - Primavera P6, AutoCAD Light, Business Object, Regulatory, Audits, Inspections

Web Share - SharePoint, Enterprise One, Lotus Notes, Livelink

Engineering - Programming/Hardwired - PLC Honeywell Automated Controls program (TDC2000 / 3000), SCADA, AutoCAD - P&ID, design Automation Controls Process Flow Diagrams (PFD’s).

Management - OSHA CFR 1910, CFR 1926, ANSI, ISO 9001, ISO 18001, ISO 45001

EXPERTISE:

TAQA – HSSE Advisor May 2023 – Current

Maintaining HSE onsite documents, related records, accident prevention routines, onsite inspections, Hazard Observations Cards, preventative maintenance of plant equipment and Toolbox Lectures.

Observer and record HSE database, migrations of varies software.

Maintaining ISN subscription database.

Oversees waste management, facility maintenance weekly/monthly routines.

Validate new employee’s introduction safety training, provide visitor tours, oversees production and manufacturing day-to-day work ethics.

Texas A&M University Commerce - EHS Supervisor January 2022 – April 2023

Stewarded Tier II Chemical TCEQ Standard, EPA Reporting on Environmental Spills, and TRI (Fire Marshals).

Administered internal and external audits that focused on all educational departments and cafeteria food safety, livestock, R&D labs, and facilities that execute state and federal OHSA-TDI standards.

Scheduled chemical waste disposals include hazardous and non-hazardous waste, including but not limited to consolidating, labeling, inspection, and waste shipment coordination.

Performed emergency management tabletop exercises and drills that tested the protocols and procedures in climate, weather, and active shooter situations.

Directed waste management program, including lab training and heavy equipment DOT paperwork and inspections.

Trained staff facility utilizing incidents reporting using portal origami.

Oversees all environmental and safety inspections, including stormwater, SPCC, wastewater, fire extinguishers, eyewash stations, bloodborne pathogens, floods, and contaminated areas, to ensure site expectations.

Total Safety – EHS Hygiene III/COVID 19 Health March 2020 – November 2021

Investigated and managed Job Hazards Analysis accidents to determine causes and provided results.

Supervised facility wide safety programs for NRG W. A. Parish Power Plant and LyondellBasell facilities to provide health examinations to the production crew - Chevron Pasadena Refinery Plant.

Operated equipment including atmospheric monitoring meters (O2, H2S, CO & LEL), radios and fire extinguishers and knowledge with plant production equipment.

Managed LEL – low level explosives limits, checking air quality for site constructions, heavy equipment, and environmental breathing quality, and observed any hazardous waste during productions.

IMERYS – HSE Lead Quality Compliance December 2018 – January 2020

Organized quality safety programs, project site training, citation management, and OSHA and MSHA compliances, and implemented JSA lockout and tagout procedures with production operators.

Lead the facility through all audits (quality, health and safety, environmental, ethical, and customer-led).

Streamlined talc mining processes within production, communicated daily with crew work ethics, and provided any PPE as needed.

Ensured all finished goods and raw materials are to the correct quality standards and meet specification requirements.

Developed management of change (MOC) process with updated changes and modifications to maintain all regulations.

ExxonMobil – Quality SSHE Advisor - BPEX Project January 2016 – November 2018

Performed KPI metrics, gaps, safety audits, risk assessments, field site inspections, office inspections, and field site inspections, EHS incident data trends, goal zero compliance performance, and permitting activity.

Provided safety programs to provide risk assessments for air exposures, safety incidents that were work-related injuries or illnesses, security, environmental spills or wildlife, and mismanaged safety hazards.

Developed processes and procedures that improved and accomplished the goal of zero accidents and communicated expectations to contractors and third-party contractors.

Examined all project incidents, including those of third-party contractors, for any near misses and assisted in developing risk assessments, root cause analyses, and corrective actions as needed.

Baker Hughes Inc. - HSE Global Data Analyst June 2015 – December 2015

Assessed and reviewed historical data trends, PowerPoint dashboards, and reports, and assisted with metric and target development, tracking, and reporting (internal and external).

Supported the development of strategies for improving safety and quality performance with quantitative outcome targets.

Researched and developed thorough regulations and standards relating to safety concerns and made recommendations for procedures to prevent incidents and comply with regulations and industry standards.

Achieved ad-hoc analyses in response to customer or shareholder inquiries or in support of cross-functional projects

and validate quarterly environmental data submissions (energy, emissions, water, and waste) from global facilities.

International Shell Oil Co. - HSSE Downstream Advisor December 2014 – July 2015

Formulated incident data ranges from 5–15 Greenfield and Brownfield project safety audits, JHA practices, and injury and illness recordkeeping forms (300, 300A, 301).

Executed the EHS data collection programs, including metrics and monthly KPIs.

Experience developing and implementing EHS management systems such as OSHA VPP, OSHAS 18001 (ISO 45001), and ISO 14001.

Air Liquide America – HSE & DOT Coordinator July 2014 – September 2014

Managed logistic fleet reporting to the Department of Transportation (DOT) and collected data from the Federal Motor Carrier Safety Association (FMCSA) on motor vehicle records based on violations, inspections, citations, post-accidents, return to duty, certificates, applications, licenses, drug and alcohol testing, trainings, and hours of service, with overall audits on drivers.

Provided reports to the global supply chain on the proper selection and implementation of the most accurate Standard Transportation Commodity Codes (STCC) and National Motor Freight Classification (NMFC) for economical rates.

BHP Billiton - HSSE Community Coordinator February 2013 – October 2014

Established Permian HSEC incident weekly reports, SOP, audited HSEC incident data. Internal metrics using the KMI and action trackers and provided a list of action items and records contractors into ISNetWorld.

Integrated and reported incident quality management team with regulatory documentation and presentation materials for the HSEC Toolbox Talk meetings.

Implemented the new health and safety protocols and measures to ensure compliance with regulations.

Monitored safety procedures for onshore fracking utilizing safety measures from JSA, site evaluations, and trend data, and maintained trainings, regulatory corporation standards, and OSHA standards.

ExxonMobil - SSHE Papua New Guinea LNG – Lead Safety Analyst August 2012 – January 2013

Collected and produced weekly SSHE KPI incident stewardables for the PNG LNG project and quality safety audits, SSHE data entries, analysis trends, and metrics trending with TRIR, LTI, and MTC.

Cultivated, implement, and maintain programs and policies for monitoring and preventing chemical, physical, and biological hazards.

Communicated with corporate management, supervisors, and employees to maintain ongoing safety programs with recommendations, OSHA inspectors, and insurance companies.

Assisted corporate and regional leadership and staff by incorporating SSHE principals to ensure personnel are trained of workplace injuries, illnesses, and operational hazards.

International Shell Oil – HSSE & Finance Management September 2001 – October 2012

International Projects/Proposals SAP Advisor 2001 - 2003

Trained Project Managers, and Engineers how to use SAP from JD Edwards programs.

Guided and assisted globally, SAP technical delivery and project management under the direction of Asset Management contribute to securing functional Upstream project financial standards.

Outlined SAP training requirements and provide six phases of methods: discover, prepare, explore, realize, deploy, and run phase processes.

Provided SAP directions and coached project members to perform the overall functioning of the business activity.

Delivered technical leadership on Asset Management projects as needed and clarified the input on tenders, bids, or upstream proposals.

International Topsides/Subsea Financial Management (Project Approvals) 2003 - 2006

Generated safety programs, combining them with the business proposals as given in the allotted budget-based project requirements.

Associations with VPs, Project Managers, and Engineers with evaluation and decision-making, invoice oversight and approval, international project proposal budgets, purchase/replacement evaluation, and managing policy programs.

Accomplished SAP financial analysts build complex models to analyze investment returns and conduct various analyses to analyze Upstream Topside and Subsea projects.

Created SAP projects based on the capital budget, timelines, products, third party services, and contingencies as needed and KPI reporting.

Wells Deepwater Offshore Drilling HSSE Analysis 2006 - 2012

Preserved Wells Deepwater drilling relationships with EHS regulatory agencies, managed environmental spills and permits, and conducted regulatory inspections and incident reporting.

Assisted with Joint Venture Company investigations of incidents (TRIR, LTI, MTC, LWD, and fatalities) for root cause analysis, hazard analysis data, SDS, risk assessment, corrective actions, and reviewing safety suggestions before distribution for safety improvements.

Performed site observation and reviews, documented corrective actions, and documented stop-work actions.

Assisted in safety verification from contractor evaluation and has training in place for the scope of work (H2S, well control, Hazcom).

Completed JSA’s review of all Wells Deepwater Rigs and part of the investigation and follow-up of incidents, prepared reports for leadership of significant high risk incidents functional management per project reporting procedures.

Honeywell Automations Controls Inc. April 1990 – June 2001

Automation Control Specialist 1990 - 1992

Overseed assembly and wiring using manufacturing methods, engineering drawings, and workmanship standards for products ranging from simple standard sub-assemblies to moderately complex standard systems.

Performed point-to-point marshalling of wiring within multiple cabinet racks, desk side consoles, and field junction boxes.

Maintained the work processes using safety, HSE, and quality policies and applied them as appropriate to each project.

Continued with production improvement on electrical manufacturing efficiency by analyzing and deploying process flow, space requirements, equipment, and work cell layouts.

DCS System Engineer 1992 - 2001

Presented in kickoff meetings with clients review PLC automation control configurator designs for major operators per site downstream site operations and acquired downstream plant specifications for automated control system hardware, software, and configuration.

Provisioned testing startups and shutdown sequence with commissioning with 100% project satisfaction per Shell Oil, Kronos, Chevron, and Lyondell Chemistry

Facilitate and/or support improvement projects, maintenance projects, and aid in process troubleshooting Collaborate with fellow plant engineers and platform architects to implement robust process control solutions.

Designed and reviewed instrument designs and communicated technical instrumentation P&ID schematic audits, system programming analog/digital, and system power distribution.

Contact this candidate