Machinist programmer

Seth Davidson

**** ********-******** ***. ********, PA 15757

•Cell: 662-***-**** Home: 814-***-**** E-mail: **********@*****.***

Objective

Experienced professional seeking to fill a professional level CNC machinist or Programmer position.

Key Qualifications

●Over a decade as a machinist

●5yrs experience combined in Tool and Die; 2yr college and 3yr on job for progressive stamping dies

● 18 yrs of Cnc experience on various pieces of equipment.

●CAD/CAM CNC programming experience for over 17 years.

●Extensive tooling knowledge.

●Extensive material cutting data knowledge.

●Utilization of Aggressive machining strategy’s and Advanced programming techniques

Work Experience

Machinist/ programmer, Pace Precision Products November 2018 - Present

Operation and programming of both Doosan vertical milling and turning centers in contract machining jobs. I also suggest tooling to increase production and quality of parts. As well as application and use of advanced programming techniques.

Machinist 3, Gasbarre Products Press Div. July 2016- November 2018

● Operation and light programming and program editing for a Hyundai-Wia boring mill in the production of powdered metal press components, repair And contract machining jobs.

CNC Programmer, Xtreme Machining June 2014 - July 2016

• Head CNC programmer for company, where I was responsible for Programming of Johnford vertical and Doosan HP5100 horizontal mills. In the design and manufacture of gun parts as well as general contract machining jobs, my programming expertise is on Unigraphics software. The types of programming abilities range from simple two and three axis machining to complex 3-D machining. I have experience with hard milling as well as high speed machining.

Machinist Level 3, General Atomics 2013 - May 2014

●Setup and programming Haas ST-30, ST-40L, VF-6’S, VF-12, BOST SMART 36C VTL, in the manufacture of components for the petrochemical, energy, and defense industry.

●Increased productivity while employed here thru my knowledge of tooling and collaboration with supervisor and tooling reps for turning of Inconel 718, Where the previous process took approx. three-four hours and involved many tool changes.

●The changes made yielded less tool changes and shortened the process to approx. 45 mins. Boosting yield from an estimated eight to 10 pins per machine per week to eight pins per machine per day or 40 per week.

● Programming completed either at the machine for basic contours or for more complex and 3D machining programming is completed on Cam system by a programmer.

CNC machinist, Precision Metalworks. 2010 - 2013

●Setup, programmed and operation of Fadal 15XT, 6030, and Mazak Smart 300M lathe, In the manufacture of die components and parts for automotive/ heavy equipment. Also extensive use of fixtures to perform tasks.

●During my employment I helped to increase production thru the implementation of improved cutting data. Also while there I repaired a large manual lathe with the help of fellow employees in the replacement of bearings in the headstock and repair of a drive pulley by sleeving and reboring the taper in the pulley.

●Improved part finish and tool life by replacing the Castrol coolant with Blaser Swiss lube. I also sourced information for different lathe machine tools that were available for purchase. Which the company settled on the Mazak that was purchased and I programmed and tooled up after it arrived.

●Performed die maintenance including repair, new sections, die setting, and sharpening.

●Programming of jobs completed either at the controller for simple to intermediately complex designs, parts also programmed on EZ-CAM v20 for basic 2D to intricate 3d 3-axis milling.

●Performed routine maintenance on machines that included breaking down of machine tool parts such as chucks and head stocks (manual lathe)

CNC Machinist, Ace Machine And Fabrication 2010 - 2010

●Set-up and programming of Haas VF-6 and Fadal 3016, 4020 and 15xt In a job shop role. Programming from print using CAD / CAM software.

●During my employment I operated 90% of the equipment in the shop to complete the task or job.

CNC Machinist Programmer and Operator, EMS Medical Systems. 2009 - 2010

●Set-up, programed and operation of Mazak Intergrex 100-IVS and Mazak Nexus 200MY and Nexus 200- II MSY lathes in the production of medical instruments for various customers. Durning my employment I increased my machine(s) production by increasing speeds and feeds to suit cutting conditions.

● Ran anywhere from one to seven machines at a time depending on setups and cycle times.

CNC Machinist Programmer and Operator, KMA Manufacturing 2008 - 2009

●Setup programming and operation of American Turn-master CNC converted 32x144 lathe and Haas TL- 2 tool room mill along with Faro laser tracker training.

●Involved in Servicing, rebuilding and laser alignment of molds at Nucor Memphis.

● During my employment I repaired and got the company's only lathe running by sourcing the correct Cnc

conversion technician for the machine and PLC unit.

●Trained on the faro laser tracker and was the sole programmer for their Haas TL-2 tool room mill.

●I Was involved in getting a converted CNC lathe into operation. Thru repairing tool post circuits and observing technician reprogramming plc and logic in controller

CNC Programmer/ Operator, John Crane Inc 2007 - 2008

●Setup, programming and operation of a Mazak Nexus Quick Turn 350. Which was used in producing Mechanical seals for the petrol-chemical industry.

●During my employment I constantly pushed the machine to get product out faster. With better quality. While achieving a low scrap rate of less than 5% which was a company standard.

●I produced twenty-seven complete parts in a shift on a couple occasions compared to first shifts four to six parts.

●I consistently produced five to eight parts depending on material. Some materials such as Hastalloy C was an one to two shift part.

Education

Associates Of Applied Science 2004 - 2006

● Northwest community college

● Graduated with a 3.36 GPA.

●Concentration in Tool and Die Technology.

Desoto County Career and Technical

2002 - 2004

● Graduated with 4.0 GPA

●Concentrated in metal trades

Job Related Training

●11-20-2008 faro laser training course

● 1-19-2014 Delcam PowerMill training

Awards Received

•2006 First Place in SkillsUSA CNC Programming competition.

Contact this candidate