Ferdaus Al Amin
ad1i66@r.postjobfree.com
ad1i66@r.postjobfree.com
Ph: +1-360-***-**** (IP-Ph)
+1-289-***-**** (cell)
Fiber Network Design * AutoCAD * ARES ( = SpatialNet) * * Integrated Project Management
* Right-of-way * Permits * Quality Control * * IT Business Analyst * Software Development * Linux * Telecom * FttX * MDU * SDH * DWDM * OSP * QGIS * CSQA * CSBA Capex Competence:
Preparation of infrastructure specs for new data center with power, civil works, cabinet enclosure, cold aisle containment, precision A/C, DCIM(software) etc
Assign roles, works and responsibilities in Matrix table for multi party agreement in major projects, set task/ deliverable / performance expectations for resources, set Fee for Services (FFS); Also termed as RACI matrix
Prepare specifications for major Telecom systems’ procurement, installation, testing and commissioning via tender documents. These included Telecom OutSide Plant(OSP) system works, DWDM, M/W systems, OSS/BSS specs
FTTH design optimization; drawings for “Splitter based” fiber optic network for selected area both in GIS based OSP software and Excel spreadsheet (F2 Networks)
Fiber cable optimization in Long haul Telecom Transmission Networks (F1 equivalent); Distribution Networks(F2) and input records in GIS based OSP software
Prepare AutoCAD drawings for City route permit of underground / overhead / aerial
/ buried (i.e. all type) fiber cable network civil drawings
Prepare Requirements Documents for GIS based Telecom OSP software (Open Source) development for internal clients
Supervise all of the above as Project Director/Manager Team Endeavors:
Conduct meetings in planning upcoming short term, long term project works
Analyse projects’ progresses in weekly meet and revise estimates as needed with further delegation of works and responsibilities (includes Civil works)
Build teams to target specific jobs and delegate works to teams with specs, responsibility matrix and weekly meet for the feedback of the same. Radio Propagation Systems
Path profile design in computer programme for RF propagation in UHF and M/W range of frequencies
• flat terrain, point to point undulating terrain, vegetation, annual rainfall, rainfall density etc..
• Telecom Tower erection(100m), verification of installed template in levelling, Tower leg installation prior to RCC casting
• Selection of radio equipment in VHF, UHF, M/W(antenna + electronic circuit at the antenna); feasibility of Radio path profile, Fresnel zone etc.
• O & M of radio wave (UHF, M/W) communication
132KV Tx line; 132/33/11KV worked in substation erection from civil, mechanical works to testing & commissioning
Dec23_FAA_CV.odt ; Page# 1 of 5
Work Experience:
11/2021 – 09/2023; Lead; Integrated Building Project
• 7 Storey Intelligent Building project with Fiber connectivity on each floor; bidirec- tional sensor activated security system with remote functional capability.
• 2nd floor completed.. work in progress .. work on hold currently
• Apartment sale & rental agreements discussions are on
• Assigning apartment finishing work to individual independent contractors of plumb- ing, electrical, Tile works, uPVC windows, MS grill, main apartment gates; S. Steel use
• National Building code is adhered in the project 06/2013 – 08/2019;
Lead Planning & Project Rollout; ADN Telecom, Dhaka, www.adnsl.net
Consultant for Telecom Tower license AB High-tech Consortium(Jt. venture)
“Requirements” docs for GIS based OSP fiber Network Planning, drawings and Designing software for OSP fiber Network; Inside Plant
Plan, design and supervise the implementation of “Tier 3 “, 350KW capacity Data Centre in Cold Aisle Containment area with “Meetme” room
Negotiate DataCentre RFQs submission
“Requirements” document for AON based DWDM systems procurement
Upgrade Metro Ring network of SDH, GigE/IP-MPLS to DWDM ASON 40G network with 8 λ initially;. Estimated cost US$ 1M
Consultant for 2K MDU with GPON based FttH design & deployment.
Business Case presentation for FttH with all OSP types(Buried, Underground, Aerial fiber Cable); Right of Way cost, Lease or buy option, path ways
“AutoCAD” / ”DraftSight” for standard Central Office drawings with supervision
Work with ADN Telecom’s IT department to include ADNQGIS Fiber Planning, Designing and Management software in ADN Telecom’s IT Service Management software (ITSM)
06/2009 –05/2012
GM Technology, Fiber@Home; (www.fiberathome.net)
Lead, Telecom fiber based SDH project, Data com projects with MPLS & FttX.
SOP(Standard Operating Procedures) presentation for the company, i.e. Fiber @ Home
24x7 Client Care Centre with TT(Trouble Ticket) software system setup
Prepare the software requirements document for RDBMS software for OSP
Marketing team products for Fiber Technology services
Analyze OTDR traces, evaluate and prepare report Dec23_FAA_CV.odt ; Page# 2 of 5
12/2008 – 05/2009; Lead, Curricula Development, CAPE, Tooronto Developing curricula for Council for Access to the Profession of Engineering (CAPE), http://www.capeinfo.ca, Toronto, ON
11/2007 – 05/2008;
Design and Project Engineer(OSP); AT&T Engineering; Bakersfield, CA
Prepare AutoCAD drawings from field notes for OSP Civil works
Prepare fiber route diagrams on Micro-station including multiple splicing(Heat Up) drawings. Prepare IFR, IFC and IFA projects’ drawings
Plan & design aerial, underground conduits, fiber optics network; CSME(Custom Switched Metro Ethernet); initiate fiber make-ready process if needed.
Use ARES (Automatic Records and Engineering systems; equivalent to SpatialNet software ) using intelligent symbols in Micro-station drawing software & Generate project costs using JAM(AT&T software)
Liaison with local Authorities on AutoCAD drawings for Right-of-Way permits. Coordinated project with the Bakersfield Electrical Utility. Hold conference calls with utility personnel
Pole attachment permits and Load calculations; Make Ready Pole Fiber
Coordinate planned project work with the 3rd party contractor of AT&T Engineering. Completed several fiber based OSP project planning & designing to cost around US$3M
12/2006 – 07/2007; Business Analyst, E O Business Systems, Toronto, Canada
• Completed “Requirements Documentation” preparation a Software project name GolfTrak
12/04~ 05/06; Production Associate, MDS Sciex, ON, www.sciex.com
Assembling “Electronic Mass Spectrometer” parts; module assembling, vacuum testing
Quality Assurance of “Electronic Mass Spectrometer” parts as per standard and specification.
Initiate “Non-conformity” in designs of vacuum valve control system in testing procedures
12/2002 – 11/2003; Production Associate, Celestica; Toronto, www.celestica.com
Worked as an Assembler at the production floors of SunMicrosystems, Juniper, Cummins
Used SAP system software for production floor MM(Material Management) in MDC; Material Distribution Centre (RTS; Return to Store) 12/1998 – 05/2002; Chief Tech, Access Networks, Emirates Telecom Corporation, Dubai (www.etisalat.ae)
1 Roll out, test, configure and commission GSM transmission backbones on STM1, E1, PRI level, HDSL and other fiber optic link systems.
Dec23_FAA_CV.odt ; Page# 3 of 5
2 Commissioned several ROADM SDH Transmission system in fiber networks. 3 Performed “Quality” test of long haul dark fiber cable network, analyze OTDR traces, evaluate fiber characteristics and report documented results 6/1996 – 11/1998; Divisional Engineer; Ministry of Posts & Telecommunications, Dhaka
• Inspect Radio Communication equipment documents for Import permission for newly licensed GSM Mobile companies; Grameen Phone, Sheba Telecom and AkTel
• Assign radio frequencies for operation of VHF, UHF and M/W bands to GSM Mobile companies, Analog Mobile companes, Oil & Gas Exploration companies; both off-shore and on-shore; Walkie-Talkie users of Bangladesh region
• Conduct monthly Meetings of Frequency & Wireless department to assign radio frequency
(with radio power) to Mobile Operators, Analog Mobile companes, Oil & Gas Exploration companies; both off shore and on-shore; Walkie-Talkie users of Bangladesh region
• Prepare monthly reports of Frequency & Wireless department meetings participated by different Ministry personnel
• Work as CAB(Change Advisory Board) member for recommendation to new radio technology equipment in the market and their possible use in Bangladesh
• Prepared radio Frequency Rate Chart (with radiation power related to the radio equipment) first time in the country wwihout the help of Internet. The same is still in use today with minor modification BTRC(Bangladesh Telecommunication Regulatory Commission)
Education (University only):
B.Sc. in Engg. (Electrical & Electronic) from B.U.E.T, equivalency validated by University of Toronto
Professional Body: - “Life Fellow”, Institution of Engineers, Bangladesh 1998 : Selection as Lead Projects : Motorola CDMA Project, Bangladesh Professional Developments:
Keeping abreast with National Building Code 2020; Vol 1 & 2 for Canadian Project Administration perspectives; Sep., 2023
Completed “Introduction to Digital Journalism” online from Reuters; Nov., 2022
Participated Huawei “Active Intelligence” show in Shanghai, October, 2018 with visit to Huawei’s Shenzhen Data Centre
Attended “Industrial Automation” show in Shenzhen, China on 30th June, 2017
Attended Nokia's AON APAC Summit in Bangkok, 24th to 26th May, 2016
Certificate in SAP(S&D) from “Solutions One” Training Centre in Chicago, IL, June, 2008
Certificate, OSP Engineering; October, 2007, San Antonio, Texas for AT&T Engi- neering
Certificate, “IT Business Analyst”(CSBA) & ”Software Quality Test Analyst”(CSQA) Institute of Software Engineering, Toronto, ON; 2007
Certificate, Centennial College; Toronto, ON, 12/2004; "Voice and Video over IP" Dec23_FAA_CV.odt ; Page# 4 of 5
Certificate, CQT(Certified Quality Technician) of American Society for Quality(ASQ), 2004
Dubai 1998 and 2001, completed MCSE and CCNA course
Spectrum Management & Radio Freq Planning, BailBrook College, Bristol, UK, 02/1994
“Digital Radio Transmission” using SEL at Telekom Malaysia, KL, Malaysia, 08/1994
ITU "Spectrum Management", Geneva, Switzerland, 11/1996
Unix, Oracle & C Training at Bangladesh Computer Council, 07/1990 Certificate
NEAX61E Digital Exchange training, NEC, Tokyo, Japan, from 03/1989 to 08/1989
INMARSAT satellite communication training; Dhaka in 1990 Languages Proficiency Levels:
English: Fluent -Full Knowledge;
French: Speak – Ltd; Reading – Adv
Hindi: Speak -Adv;
Urdu: Speak -Adv; Reading – Avg
Arabic: Speak – Ltd; Reading – Adv;
Japanese: Conversation – Average
Driving License: Category “G” from Ontario, Canada ; UAE Vaccination status : Moderna (Doze 1 & 2); Booster : Astrazeneca
Dec23_FAA_CV.odt ; Page# 5 of 5