Steven Terry

*** ****** *** *, ******* *****

Phone 734-***-**** • E-mail ad1hh6@r.postjobfree.com

NCCER CERTIFIED INDUSTRIAL MILLWRIGHT AND RIGGER

UAW MILLWRIGHT JOURNEYMAN

** *** *********** MILLWRIGHT/ TURBINE MECHANIC / MAINTENANCE TECH/ RIGGER / SUPERVISOR / PROJECT MANAGER / PMP EXAM CLASS v6 2018

Summary of Qualifications

I have completed an apprenticeship as a Millwright through the U.A.W. local 600 and acquired both NCCER Industrial Millwright and Rigger Certifications

I held a Turbine Operator's/Reciprocating Engineers license from the City of Dearborn, for (3) years from 2002-2005

I have extensive computer knowledge with the ability to build and maintain complex databases

I have obtained Unescorted Nuclear Plant Access at Comanche Peak Nuke Plant in Glen Rose Texas 2008

I have been an Assistant General Forman in a Turbo Room that supplied constant air flow to the companies (3) Blast Furnaces, Supervised Maintenance crews that supported all phases of Steel Production

Work Experience

November 2020 -Present Jones Lang Lasalle (Amazon, Florida)

Maintenance Tech III

Maintain conveyance system for Amazon Sort Center

Perform daily, weekly, monthly, and yearly PM’s

Perform daily critical walks to ensure line is running properly

Maintain air compressors

Maintain Facility…i.e. doors, lights, restrooms, project work

Maintain daily time and reports on work performed

January 2016-November 2020 Jones Lang Lasalle (GM Power Train, Romulus, Mi)

Facility Maintenance Supervisor (1,000,000 plus sft Facility)

Bi-Weekly time input for (2) shifts of (20) employees

Daily assignment of work for maintenance personnel, to include Electricians, Millwrights, Pipefitters, HVAC, Stationary Engineers, and Support personnel.

Between the second shift supervisor and myself we Receive, Review, Plan, Assign, and Supervise our monthly PM’s (Preventative Maintenance) and CM’s (Corrective Maintenance) on all Facility related equipment i.e. (20)+ restrooms, all Doors including both Pedestrian and Vehicle, (54) Air Supply Houses, (3) Process Chillers, (3) facility Chillers, (4) Air Compressors, (2) Chip Washers, (2) Dunnage Washers, (9) Roof Top Air Conditioners, (90) Exhaust Fans, Oil Storage and Supply House, and all Plant Lighting.

Receive, Review, Plan, Assign, and Supervise Daily work load of Help Desk Work Orders.

Uaw workforce

December 2014-January 2016 Lincoln Forge

Maintenance Tech

Maintain Production on (4) Ceco drop hammers (2) 4000 lbs. and (2) 5000 lbs.

Maintain Production on the Induction systems for said hammers

Maintain Production on (8) trim and pierce presses

Maintain Production on (2) Roto Blasters

Maintain Production on (4) CNC machines for die sinking

Maintain Plant building and company property

Maintain (2) coin presses

Design and fabricate any needed platforms, guards, handrails, lifting devises...etc.

Maintain hydraulic dumping tables

July 2011-November 2012 Compressor and Turbine Services

Turbine Mechanic

Major inspections and overhauls of Steam Turbines (Elliott, Moore, Terry, Coppus, Worthington, Turbodyne…)

Major inspections and overhauls of Compressors

Unstacking and restacking rotors

Rotor Balancing (adding, grinding, blade swapping)

Incoming inspections and dimensions on turbine and blower components

Document all discrepancies and out of tolerance dimensions per print

Final assembly of said turbines and compressors in accordance with print

Valve tear down and inspect. Replacing any wore or broken parts and rebuilt

High pressure hydro & gas testing of valves and all types of compressors.

Setting turbines and compressors to run position and thrust assembly

•Air test turbines to required pressures

•Test run Turbines and set overspeed trips to required positions

November 2010-July 2011 Revak Turbo

Turbine Mechanic

Major inspections and overhauls of Steam Turbines

Major inspections and overhauls of Compressors

Incoming inspections and dimensions on turbine and blower components

Document all discrepancies and out of tolerance dimensions per print

Final assembly of said turbines and compressors in accordance with print

Valve tear down and inspect. Replacing any wore or broken parts and rebuilt

High pressure hydro & gas testing of valves and all types of compressors.

Setting turbines and compressors to run position and thrust assembly

•Air test turbines to required pressures

•Test run Turbines and set overspeed trips to required positions

January 2009-November 2010 General Electric Oil and Gas Houston Service Center

Turbine Mechanic

Major inspections and overhauls of Steam Turbines

Major inspections and overhauls of Hot Gas Expanders

Major inspections and overhauls of Axial Compressors

Major inspections and overhauls of Compressors

Major inspections and overhauls of Overhung Compressors

Rotor inspections, run outs, stack checks, electrical run outs on probe areas

Unstacking and restacking rotors

Rotor Balancing (adding, grinding, blade swapping)

Incoming inspections and dimensions on turbine and blower components

Document all discrepancies and out of tolerance dimensions per print

Final assembly of said turbines and compressors in accordance with print

Valve tear down and inspect. Replacing any wore or broken parts and rebuilt

High pressure hydro & gas testing of valves and all types of compressors.

Setting turbines and compressors to run position and thrust assembly

Feb. 2008-June 2008 Various Locations (Glen Rose Texas (Comanche Peak), Houston Texas (Calpine), Brush Colorado (Manchief Power Plant)

Field Service Turbine Mechanic

Major inspection and rebuild of a 320-Megawatt Gas Turbine

Major inspection and rebuild of a 1200-Megawatt Steam Turbine

Routine Maintenance on a 1300-Megawatt Steam Turbine

Disassembled Turbine and removed main rotor

Destacked main rotor removed bad blades

Restacked main rotor

Provided Rigging as needed for job completion

Performed routine coupling inspections

Removed, inspected and replaced gas burners

Took thrust and run out readings on Turbine, Generator and couplings

Performed blade clearance checks

Tore down and rebuilt main oil pump, checked and recorded run out and clearances

Replaced oil seals and seal gaskets, checked and recorded clearances

Removed, inspected and reinstalled Hydrogen Coolers

Removed, inspected and replaced steam seals

Removed, inspected and replaced oil seals

Removed, inspected and replaced turbine bearings

Nov. 2003-Oct. 2007 Severstal Steel N.A. Dearborn, Mi (Old Rouge Steel…Company went bankrupt)

Maintenance Technician

Good background in condensers and blowers

Good background with pipefitting and some hydraulic

Gearbox inspection, removal, repair and alignment

Bearing inspection, removal, and installation

Coupling (all types) inspection, removal, installation and alignments

Table rolls inspection, removal and repair

Provided Rigging as needed for job completion

Highly proficient with stick and mig welding

Highly proficient with a gas torch or plasma cutter

All aspects of steel fabrication, i.e. survey, layout, assembly, and installation

Capable of designing and building platforms and staircases to code

Handrail layout, building and installation to code

Ability to read, revise and generate blueprints

Extensive knowledge and ability in Auto Cad

1999-2003 Rouge Steel Dearborn, Mi

Turbo Room Maintenance/Operations Foreman

Scheduling of all maintenance for (2) 11,000 hp Ingersoll Rand Steam Turbines (1940), (1) 15,000 hp G.E. Electric Blower (2002), (1) 7,400 hp G.E Steam Turbine (1913), and all equipment and systems used to support them.

Oversaw ALL maintenance performed on said turbines and support systems

Sought out and acquired contractors to perform work beyond the scope of our workforce within Rouge Steel

Maintained a spare parts supply

Designed and maintained the Turbo Room's data base's that tracked machine performances and costs, along with the office paperwork (i.e. time sheets, daily logs, parts inventory, vacation scheduling, cost summaries…)

Time keeping for operators and maintenance personnel

Scheduled and oversaw all turbine overhauls and routine inspections

Performed all the Turbo Room's vibration analysis, to include overseeing the installation and design of the screens for the vibration monitoring system

Implemented the Turbo Room's lock out program and procedures

1995-1999 Rouge Steel Dearborn, Mi

Millwright

Completed Millwright Apprenticeship and worked as one performing tasks such as; table inspections and repairs, motor installations and alignments, coupling alignments, door repairs, furnace repairs, platform and stair fabrications, VERY extensive fabrication experience…etc

1991-1995 Wayne County Road Commission

Engineer Assistant

Provided testing on asphalt and concrete materials used in road construction

Generated blueprints for road construction and renovations. (Auto Cad)

Stress testing on metals and fabrics used in road construction

Nuclear density testing of sub-base materials at job sites prior to paving

1987-1991 Goodell Grivas Engineers

Structural Steel Detailer

Generated assembly drawings for structural steel erection

Received and revised drawings per checker changes

Ran blueprints of said drawings

MILITARY SERVICE

1984-1987 United States Army

Nuclear, Biological, Chemical Specialist

Attained the rank of E-4

Honorably Discharged

EDUCATION

Mar 2018 Lansing CC

PMP Exam Prep class

1995-1998 Henry Ford Dearborn, Mi

Completed classes required for Millwright Apprenticeship

Contact this candidate