Lesley Jackson

***N Plantation Blvd.

Lake Mary, Florida 32746

Cell @ 561-***-****

E-mail: ad177s@r.postjobfree.com

Career Summary: Continuing professional development with experience in the

Printed Circuit, Electronics, Electroless, Electroplating and Environmental industries;

Demonstrating proven engineering and leadership abilities in manufacturing, laboratory

and R & D environments for:

Laboratory Management Quality Control Management Plating Engineering

Manufacturing Supervision Chemical Processing Engineering Failure Analysis

Research & Development Application Engineering

Professional Experience:

Sparton, DeLeon Springs, Florida (2021-2023)

Production Supervisor for sonobuoys to support anti-submarine warfare and undersea

warefare for the U.S. navy throughout the world. Supervise 60 operators for the

production of sonobuoys. Insure that all safety, quality and processes are followed in

accordance to company and goverment standards. Ensure that all procedures are

updated and that operators are cross trained in various processes throughout the

facility. Make sure all production goals are met and participate in fidelity, quality and

DCMA audits.

EHS Specialist for production and engineering groups. Make sure that production lines,

support groups and engineering departments follow and maintain all safety guidelines

and requirements. First aide certified to provide medical assistance to personnel.

Evaluate and improve processes to improve safety for production and engineering and

provide proper PPE throughout the facility. Evaluate new chemicals for approval for

production and new product development. Ensure that the facility complies to all

guidelines for large quanity generator and all local state reports are maintained and

processed accordingly.

ABB, Ormond Beach, Florida (2019-2021)

QA Lead to support electrification division for machine shop, plating, CNC, molding,

wire assembly, casting and engineering departments. Perform process audits, first

article Inspections. Issue CAR’s, NCR’s, NMR’s and PARR’s for processes, production and field failures. Update procedures and processes for continual improvements. Maintain and conduct MRB meetings with manufacturing for specific defects and rework procedures. Maintain and Calibration for equipment and tools. Perform safety audits throughout the facility. Audit production to ensure SOP’s are being followed in accordance with ISO requirements.Prepare certificates of Conformances for specific customer requirements.

Cardinalhealth, Deland, Florida (2017 to 2019)

QA Inspector for plastic molding, syringe, needle assembly and shipping departments.

Perform product audits, first article inspections and review process documents and procedures. Assist engineering in validation of new machines and product. Verify and review traceability records for production. Issue CAR’s and NCR’s for nonconforming product or processes to production. Review DHR’s for completeness and errors and enter data into Quad’s data base system.

Consulting (2016-2017)

Assisting companies in updating procedures, lean manufacturing practices, becoming

more efficient and improve production. Prepare and perform internal audits to ensure procedures are being followed per ISO requirements. Assist in supplier audits for existing suppliers and new suppliers. Issue and resolve CAPA’s and NCR’s. Prepare calibration on instruments and equipment. Analyze for specific trends to improve quality and internal processes.

Crossmatch Technologies, Palm Beach Gardens, Florida (2009 – 2016)

Quality Control Manager – Responsible for supervising and managing staff to support

manufacturing of Biometric identification systems. Covering Incoming inspection of Mechanical, electrical, Optical, Plastic, COTS and chemicals items. Perform Product audits, instrument inspections, shipping, packing and box audits and final inspection. Maintain and schedule all factory and engineering calibration and internal audits. Perform supplier audits for existing and new suppliers. Issue deviation waivers, NCR’s, CAR’s, when suppliers are not compliant. Perform Material Review Board meetings and control all discrepant materials and first articles. Update and maintain all processes and procedures. Provide senior management with monthly quality metrics. Perform safety inspections and safety training for factory employees and keep MSDS book up to date. Member of safety team for last 6 years and Emergency response team. CPR trained and certified. Perform Internal Audits to comply with ISO Certification. Ensure that the department follows all guidelines and processes to maintain ISO regulations. Silicone Lab Process Engineer – Established working procedures and processes to produce silicone sheets and pads. Improved quality and yields from 40 to 98%. Stream lined and improved process efficiency to meet the requirements for production. Maintain all level of inventories to support process. Promoted to Quality Control Manager for production area.

Prime Technical Coatings, West Palm Beach, Florida (2006-2009)

Quality-Process-Floor Supervisor: Inspect and log in all work for powder coating and

industrial painting. Determine and set up processes for specific jobs per customer request. Schedule and track work flow through processes. Inspect work through processes and final inspection to meet customer requirements. Trouble shoot and resolve quality and process issues and implement corrective actions as required. Issue certificate of conformances and all quality related documents for shipping. Maintain all inventory and insure all safety rules and guidelines are followed as well as MSDS’s and ASTM and Mil specifications.

UCT Coatings, Stuart, Florida (2002-2006)

Chemist: Set up Inorganic lab from scratch to support Electroless, Electroplating, Research and development, application and process improvement. Supervise and maintain qualitative and quantitative chemical analysis results and data. Establish and determine and update all procedures, methods and SOP’s to support chemical processing and physical testing. Trouble shoot process engineering, conduct failure analysis and assist in R & D and application engineering.

Sanmina/Hadco, Santa Clara, Ca. (1997-2002)

Engineering/Lab Manager : Manage 2 laboratories and staff to support manufacturing,

engineering and waste treatment departments. Responsible for analysis and controls for chemical processes and micro sectioning of in process and final product. Assure optimum product by performing failure analysis and operating manufacturing at optimum conditions and controls. Review and update and maintain all work procedures, lab processes and MSDS books. Support engineering in cost reductions, DOE’s, gauge R & R’s and establish new procedures and processes as required and support quality control with CAR’s, reliability testing and failure analysis. Maintain capital equipment and reduce costs and increase overall operating efficiency.

Pure Coating, West Palm Beach, Florida (1993-1997)

Process Engineer/Lab Supervisor: Responsible for process engineering and laboratory supervision to support manufacturing and R & D activities for electroplating, electroless plating and waste treatment department. Also plan and schedule the workload thru the shop to insure on time delivery to customers. Developed and improved plating and lab procedures for electroless nickel, gold and copper lines. Set up new lines and procedures and processes to support production and improve overall efficiency.

Nutting Environmental, Boynton Beach, Florida (1992-1993)

Inorganic Lab Manager: Supervised technical staff responsible for the analysis of water, soils and Sludge’s. This included performing periodic drinking water certification; inventory and control of laboratory area, bottle prep and field prep kits; laboratory operating cost reductions and efficiency; established and set up procedures; program and scheduling of solvent recycling and distillation for organic testing; and assisting project managers with the interpretation of lab results and preparing analytical reports.

McGinnes Laboratories, West Palm Beach, Florida (1991-1992)

Inorganic Lab Manager: Managed technical staff responsible for the analysis of water, chemical and instrument analysis.soil and sludge’s. Included extractions, microbiology, nutrients, metals, solids and wet

Northern Telecom, West Palm Beach, Florida (1987-1991)

Analytical and Failure Analysis Laboratory Supervisor: Managed laboratory, technical support. Responsible for analysis and control of all chemical process and micro-sectioning for quality assurance, analysis and assessment of incoming materials; documentation of chemical usage and cost tracking; and training all lab personnel. Performed failure analysis on product and procedures for optimum product and yields. Set up SPC, set up plasma emission and AA spectroscopy. Utilized SEM, thermal analysis and cross sectioning to analyze product failure and identify and correct the root cause.

General Supervisor Drill & Rout Department: Manage the production of the drill and rout Operations. Plan and implement drill bit inventory system and cost control program. Reduction of rework by 30% increasing the department’s efficiency.

Wet Process Supervisor: Supervised the deburring, electoless, electrolytic, primary image and SES processes. Updated and improved processes and standards in these areas. Improved the Yields and quality. These improvement resulted in the promotion to the above positions.

Phoenix Circuits, West Palm Beach, Florida (1985-1987)

Quality Assurance Manager: Completed design, installation and organization of QA lab, which included all documentation for manuals, procedures, specifications and test results. Implemented micro-sectioning for product and process quality assurance. Achieved Mil-Spec qualification. Process Engineer: Responsible for all plating processes associated with the production of PCB’s.

American Hoechst, Somerville, N.J. (1983-1985)

R & D Chemist: Perform chemical analysis and evaluation of all raw materials, resins and sensitizers and the origination and testing of all new formulas. Provided all customer and production formulations and analyzed competitive products.

Shipley Company, Marlboro, Mass. (1981-1983)

Quality Control Supervisor: Supervised laboratory and production support including all testing procedures for incoming materials, in-process and final testing of Microposit photoresist and related products. Acted as a liaison between sales and production groups.

Education:

B.A. 1981 Environmental Science, Framingham State College, Framingham Ma.

IPC-A-610 Specialist (May 2014)

Basic Excell Class (Sept. 2014)

Lean Fundamentals Training (May 2015)

Basic and Advanced DOE Training, Manufacturing Management, SPC & SQC & JIT.

Root Cause & Corrective Action (June 2023)

5 Why Analysis Training

Yellow belt Certification (Sept. 2020 & 2023)

DOT Training (Sept 2022)

IATA Training (Oct. 2022)

RCRA Training (June 23)

Conflict Resolution (June 2023)

Blood Borne Pathogens (2022 & 2023)

CPR/First Aide (Dec. 2022)

NFPA 70E Electrical Safety (Jan. 2023)

Lithium Battery Safety (Feb. 2023)

Skills for Supervisors (Aug. 2023)

Storm Water Training (Oct. 2023)

Contact this candidate