AMBRISH PARIKH

Caledon, Ontario ~ 647-***-**** ~ ad16r6@r.postjobfree.com ~ linkedin.com/in/ambrishparikh

~ MAINTENANCE PLANNER~

Dedicated Electronic Engineering professional with exceptional skills in handling equipment and procedures. Easily adaptable to change in electrical technology with a great eagerness towards learning and expanding capabilities. Extensive knowledge of electrical systems and controls. Adaptive to the new advancements in the field of Engineering. Excellent operational knowledge, problem solver of electric and electronic control systems.

PERSONAL PROFILE

·Directed/inspected/ supported the work of personnel involved in the design, installation, testing, calibration, modification, devices, controls and machinery used in the production.

·Followed LEAN Manufacturing Tools (5 why analysis, FMEA, PDCA) standards for (continuous improvement, Cost Reduction Activities, reliability / performance of plant facilities, Energy conservation etc)

·Quality control tools: Comply with QS 9000/ ISO 13485/ ISO 9001:2000/ OH & S standard policy; TQM/TPM, RCA, EHS, and Internal Auditor for ISO 13485.

·Well-developed in project management, interpersonal and communication skills, positive attitude with a strong work ethic. Willingness to adapt to new concepts

·Provide engineering support for standardizing materials, procurement, planning, coordinating, scheduling and assigning work requirements associated with routine/preventative maintenance, projects and day to day activities related to operations.

·Assist Project, Controls & Validation Engineer to generate & execution of equipment validation protocols (IQ/OQ/PQ) reports

·Ensured timely and collaborative communication with production and quality personnel to ensure maximum uptime of production line equipment & increase OEE by taking continuous improvement initiative.

·Working Knowledge & good understanding of engineering principles, various electronics components, accessories, troubleshooting Analog / Digital Circuits, Power Electronics, repair system to the component level

·Hands on experience for using different test & diagnostic equipment such as oscilloscopes, micrometers, hardness tester, multi-meter, Hi-pot tester, signal generator etc.

·Good knowledge & understanding /Troubleshooting for SCADA, DC / AC / Servo drives, PD Detector/Impulse Gen. etc.

·Industrial communication protocoles : Control Net, Device Net, Ethernet/IP, RS 232, RS 485, USB, Modbus, Profibus etc.

·Hands-on experience & familiarity in basic programming with Rockwell Software (Controllogix, RSLink 500/5000), Modicon, Panasonic, Automation Direct etc.

·Hands on training - working knowledge & troubleshooting on ETF (Turbo Jet Engine), KUKA, ABB and GE-Fanuc robot.

·Trained CSA Z462 (Workplace Electrical Safety) standard, CMRT and Internal Quality Auditor.

·Engineering support to perform automation functions activities - Reviewed, prepared & interpret engineering drawings and specifications

·Support & provide assistance to Electrical & Controls Engineer to run Electrical safety program, Arc Flash studies data for production equipment, help to develop & implementation of energy efficient projects.

·Knowledge and proficient reading and preparing electrical diagrams (single line diagrams, electrical / process layouts, schematics, wiring diagrams, cable schedules, etc.) for new and upgraded installations per respective codes/standard (CSA, UL, ESA)

CAREER HIGHLIGHTS & ACHIEVEMENTS

Boston Scientific (Formerly Baylis Medical Company Inc), ON, Canada

Staff Equipment Engineering (E&M) Technologist 09/2019-Present

·Troubleshooted, Repaired, Calibrated, install & adjustment, electrical, electronics instruments test equipment mechanisms

·Applies Knowledge of the design for Process and Manufacturing tool utilize in the medical device process.

·Manages medium to complex project for different department, Assist NEI/NPI team for new Equipment/Process.

·Assist and participated to Identify, qualify and collaborate with third party system integrators as necessary to support project and company business objectives.

·Routinely inspected equipment for proper functioning, performed PM duties and ensured accurate completion of PM work-orders and supporting documentation.

·Participated in the development of the Procurement/Sparing strategy to eliminate down time for production equipment.

·Supported the execution of new equipment installation, commissioning and qualification (e.g., IQ/OQ) and other related documents (Such as tool deviation, ECO etc)

·Assisted in the design activities, installation and operation, testing of process control equipment, application of appropriate instrumentation in a variety of process control applications.

·Applied lockout, tag-out and de-energizing procedures to electrical, mechanical, hydraulic and pneumatic equipment, before commencing maintenance and overhaul

Magellan Aerospace, ON, Canada

Electrical & Instrumentation Engineering Technologist (Contract) 01/2019-07/2019

·Troubleshooted, Repaired, Calibrated, install & adjustment, electrical, electronics instruments test equipment mechanisms for engine test facilities

·Prepared Engineering Drawings/Specifications/ Operation Procedures/ Publication change as per Customers requirements for ETF by using Double CAD & Microsoft software

·Working Knowledge of Turbo Jet Turbine Engines, Test Cell Systems.

·Troubleshoot, disassemble and reassemble ancillary Electronics equipment for repairs that include replacement of defective sensors, circuit and logic boards, sensors, controllers, micro servomotors and actuators etc.

·Service, Calibrate, Operation of Data Acquisition recording/vibration equipment, Thermocouples, Transducer etc.

·Make/Modify instrumentation to meet specified test requirements, Panel wiring etc.

·Raise POs/ Shipping Documents for instrumentation sent out of plant for repairing.

·Preparing Drawing packages for the purchasing team.

·Industrial electrical hands-on experience and troubleshooting, including 600VAC / 480V AC (3-phase), 110 VAC, and 24VDC systems.

GlaxoSmithKline Inc, ON, Canada 09/2010 – 06/2018

Electrical Maintenance & Controls Tech.

·Troubleshooted, maintained, adjusted, repaired, calibrated and installed all types of electrical equipment having complex interlocking or inter-related circuits (i.e., PLC’s, HMI/SCADA/Vision system, AC/DC drives, Laboratory Equipment etc.)

·Used systems for execution of safety, quality, productivity and continuous improvement initiatives in support of the Production.

·Read & follow P & ID drawings, Electronics engineering schematics, test procedures, assembly procedures, etc.

·Able to setup, program and troubleshoot Servo, DC, AC VFD Drives (AB, Siemens, Schneider, Omron, ELAU, Panasonic)

·Troubleshoot and repair various electrical equipment for Solid Dose & OCL equipment such as (Filling m/c, cartoners, labellers, case sealers, shrink wrappers, granulators, mixers, conveyor system etc)

·Good Understanding/ Hands on experience for to setup, troubleshoot and validate vision systems (Cognex, EXA System, Seavision (for serialization), Leatus)

·Assist and Interface with Controls & Business Support Engineers to coordinate design requirements for power, control, and instrumentation - develop maintenance & operating procedure for Electrical/Electronics equipment.

·Lead or assist in RCA/CAPA investigation of electrical production equipment failures by utilizing 6S and other quality related method.

·Strong knowledge & experience in utilizing CMMS (e.g., SAP, M-ERP) to document work completion (as per FDA, HC & other regulatory agencies)

·Ensured all work was performed in full compliance with GMP, cGMP, SOP, WI and established safety standard

·Calibrated, modified electrical or electronic and instrumentation equipment according to technical manuals, written instructions, circuit diagrams, blueprints to determine tests such as for recorders, indicators, temperature scanner, vibration monitors, position transmitters, on/off valves, speed probes, thermocouples, RTD’s, pressure, flow, & level switches, spectrometers, control valves, SMART transmitter etc.

·Carried out preventive maintenance program, executed work order, and quickly responded to equipment break down, provided shift coverage and service in a safe, time and cost-efficient manner

CERTIFICATIONS

Industrial Electrician Trade Red Seal Certificate (442A)

Instrumentation & Control Technician Trade Red Seal Certificate (447A)

ISO 9001:2000 Internal Auditor Certificate

FORMAL EDUCATION

Robotics Technician, George Brown College, Toronto, ON 2010

AUTOCAD (Level 1 & 2), Lambton College, Sarnia, ON 2010

Diploma in Materials Management, IIMM, Bangalore, India - Approved by U of T/OACETT

B.E (Electronics), Nagpur University, INDIA – Approved by U of T/OACETT/PEO

Contact this candidate