JAMIL AHMED

POSITION: Construction Engineer / Mechanical Engineer/Senior Project

My role will be working on a major mixed-use scheme in Riyadh, Saudi Arabia. I have 15 years’ experience in Saudi Arabia It will be responsible for supporting the delivering of high rise building & construction of villas, industrial workshops infrastructure projects as part of a large program in Kingdom of Saudi Arabia

My Ambitious motivated Engineer/ Inspection Engineer Searching for a middle level position in a leading, national / multinational engineering company. Expertise: Pumping installation Piping Fabrication, Steel Structure Steel, Planning, Execution, Tanks fabrication, Maintenance, Project Management, knows HVAC irrigation network firefighting, water supply and drainage network design and supervision Health and Safety Champion,

Senior Mechanical Engineer Saudi Arabia 11/07/223—Continue. Review the engineering support during construction performed by contractors including. reviewing technical submittals and shop drawings, responding to contractor queries,

• During the site visit Monitoring and safeguarding site Health and Safety performance procedures at site working area.

• Assisting in the operation and optimization of the water supply network at site to the rout wise condition

STRENGTHS:

Work towards enhancing the Management Quality

• Problem Solving monitoring the Progress Percentage schedule as per compare to the physical percentage of work completed.

• Checking the daily and weekly progress report Review the Primavera Planning Schedule prepared by the contractor and checking the status of as per the standard with coving holidays for project and resource colander monitoring the Progress Percentage schedule as per compared to the physical percentage of work completed. CAREER OBJECTIVE

Customer: Diryah Gate development Construction & Supervision Project Riyadh

• Checking the daily and weekly progress report

• Review the Primavera Planning Schedule prepared by the contractor and checking the status of the colander as per the standard with coving holidays for project and resource colander.

• Preparation and submission of daily site inspection activities Inspected spools just before erection to verify that interior is clear of foreign materials. Senior Mechanical Engineer Saudi Arabia 1/03/21—28-02-2023

• Planning and scheduling of Mechanical engineering design and design reviews for operational, construction and commissioning activities

• Supervise, inspect, identify, and resolve any related non-conformity in Mechanical engineering design, construction and commissioning activities coming at site or changes in design

• Review the engineering support during construction performed by contractors including reviewing technical submittals and shop drawings, responding to contractor queries,

• During the site visit Monitoring and safeguarding site Health and Safety performance procedures at site working area

• Assisting in the operation and optimization of the water supply network at site to the rout wise condition

• Provide support in ensuring that all the materials used, and work executed is in line with the contract requirements.

• Assist in ensuring that all safety and environmental planning is in place and that necessary measures are taken to avoid any accidents or incidents.

• Coordinate with the project managers and other stakeholders to compile and store full project documentation throughout the project life cycle for ongoing and past projects using the appropriate tools.

• Manage the daily operations of the plant during the assigned shift, including overseeing. construction activities, commissioning equipment, and troubleshooting.

• Lead and supervise a team of operators, ensuring that they are properly trained, motivated, and supported in their roles.

• Ensure compliance with all relevant regulations and company policies, including health. and safety, environmental, and quality standards.

• Collaborate with the construction team, such as the project manager, engineers, and contractors, to ensure plant construction is executed according to the approved design, project plan, and schedule.

• Monitor plant performance and identify opportunities for improvement in productivity, efficiency, and cost-effectiveness during the construction phase.

• Maintain accurate records of production activities, including construction reports, shift. Customer: MA’ADEN GOLD AND BASE METALS (MA’ADEN)- PMC Project Mansoura Massa rah Gold Project Saudi Arabian Bechtel Company logs, and equipment maintenance records.

• Conduct regular safety meetings and promote a culture of safety among all plant. employees.

• Manage shift schedules, vacations, and overtime requirements to ensure adequate. coverage of plant operations during the construction phase.

•

• Coordinate and supervise the work of all mechanical activities and operations.

• Receive / action Request(s) for Information (RFIs) that apply to mechanical works. RFIs requiring design feedback will be directed to the Designer for response. Review responses for adequacy. Local authorities and ministerial agencies having jurisdiction over the project.

• Review Contractor’s mechanical change order proposals.

• Prepare recommendations for Resident Engineer for review.

• If warranted, assist in negotiations with contractors regarding changes in contract value. or project duration.

• Review contractors’ claims related to mechanical works.

• Prepare recommendations for claims approval or rejection. for review and approval of mechanical submittals, including plumbing pumps and piping systems (drain waste & vent, domestic water), fire protection (pumps, piping, sprinkler heads), HVAC systems

(VAV boxes, ductwork, process piping, chiller systems, controls, building management system).

Monitors construction contractor mechanical installation and testing activities, including piping, leak tests, ductwork & insulation, pumps, building management system, HVAC controls, domestic water systems, foundation de-watering system, etc.

• Ensuring the correct installation of piping, pipe supports valves and other in-line equipment in accordance with the drawings, specifications, and standards.

• Manage leakage, sewage water, how to reduce non-renewable water, water conservation,

• Ensuring the maintenance of the necessary cleanliness of piping systems and the use of dry air purges here necessary bubbler, water network distribution at all areas of buildings

& water utilities in consumption’s area huge quantity.

•

As Site Mechanical Engineer (SWCC Reservoirs Phase-11 Makkah-Taif Project) Saudi Arabia- (03/03/2019 – 1/01/20--)

Khatib & Alami Saudi Consolidated Engineering Company K.S.A My duties included: Review material acquisitions, RFIs, submittals, and ensure contract performance measures are met per the position discipline. Raising NCR for maintain Quality. Evaluate the project construction to ensure compliance with standards for mechanical systems Installation of plant piping and design review according to standard, ASTM, ASME.

• Working experience on Different Standard. (API 650, 620,510, 570) standard, ASME, ASTM, AWS D 1.1). NFPA, AWWA.

To check the material (Supplied) incoming of the tanks in the light of the packing list and drawing

& to report to my chief about any missed items or incorrect material such as: check the shell course sheets; its thickness; its quantities; its dimension. 1. Working with other staff engineers to provide technical and engineering services to all areas of the company monitor the mechanicals works for conformance with the provisions of the Contract Documents and the Procedures manual with Construction and building drawing.

Duties and Responsibilities include the following. Other duties may be assigned.

• Assists in the development of commissioning plans.

• Assists in engineering design reviews.

• Interacts with contractors, interprets design and specifications.

• Deals with clients, tries to resolve problems within the scope of the design

• Conducts site observation surveys and prepares field reports on the status of projects and completion of projects with respect to compliance to the plans and specifications

• Prepares punch list reports and determines corrective measures for on-site problems.

• Prepares general condition survey reports.

• Familiarizes oneself with codes, local project regulations, construction practices and the latest equipment functional concepts

• Familiarizes oneself and obeys all the projects safety requirements including specific on- site regulations

• Communicates all projects safety concerns to employees involved projects.

• Performs routine calculations.

• Applies and reinforces education programs.

• Participates in professional trade associations and societies.

• Acts as project coordinator with other field engineers, coordinating printing, presentation. and administration procedures

• Reviews shop drawings and submittals.

• Develops MEP test procedure

• Develops MEP operating procedures.

• Responds to RFI's when requested by PM Team.

Monitors performance of contractors.

• Performs various administrative duties.

• Performs other duties as assigned.

NKY CONSULTANT & COMPANY LIMITED

SITE MECHANICAL ENGINEER

(HOUSING EMERGENCY FORCES BUILDINGS TRAINING PROJECT) (15-09-2015 TO 03-03-2019) My duties included:

The successful execution of the overall piping scope including supports, painting, testing and insulation for allocated areas of the site in accordance with the project schedule, cost and other KPIs

• Ensuring the correct installation of piping, pipe supports valves and other in-line equipment in accordance with the drawings, specifications, and standards.

• Manage leakage, sewage water, how to reduce non-renewable water, water conservation,

• Ensuring the maintenance of the necessary cleanliness of piping systems and the use of dry air purges where necessary bubbler, water network distribution at all areas of buildings & water utilities in consumption’s area huge quantity.

• Ensure that painting is applied correctly to surfaces that have been correctly prepared. Ensure that adequate QC checks are made to ensure the correct coat dry film thickness & adhesion.

• Ensure adequate safety distances during pneumatic testing.

• Organized disciplined, able to perform under pressure and manage multiple priorities and parallel tasks Saudi Arabia working experience.

Responsibilities:

• Make all installations checks prior to pre-commissioning activities

• Make pre and post commissioning checks for all mechanical installations

• Completing check lists provided by immediate supervisor

• Preparing site reports (related to progress of testing and commissioning activities)

• Understand the requirement for performance testing of systems/equipment and ensure that the performances are matching project documents.

• Understand testing and commissioning method statements.

• Understand the test and commissioning plans.

• Insist on testing calibration of testing and commissioning equipment

• to handle and understand the testing and commissioning equipment.

• Should know how to take readings from measuring instruments.

• Should have knowledge to understand performance requirements of systems/equipment from Project Documents and ask for clarifications.

• Coordinating with Contractors/testing and commissioning agencies

• Noncompromising with the performance

STRENGTHS:

Progress report Review the Primavera Planning Schedule prepared by the contractor and checking the status of as per the standard with coving holidays for project and resource colander monitoring the Progress Percentage schedule as per compared to the physical percentage of work completed. Checking the daily and weekly progress report SEWAGE TREATTMENT PLANT & TANKS & SEWAGE TRANSMISSION LINES: Construction of tanks were carried out according to codes/standards and project specifications. As per Sewage treatment plant carried out following activities

• Chlorine dosing set, Air Blowers, Filter Backwash pumps & tanks

• Odor control dosing set, Sand Trap, Control Panel, A-C lift Station

• Aeration Tank. Settlement tank . Sludge Tank

• Chlorine Contact tank, Plant Room, Lab Room, Submersible Pumps Bar Screen Valve Saudi Service Electromechanical Works Company

Owner: SEC& GACA (Riyadh Airport)

Position: Site Mechanical Engineer Saudi Arabia (23/12/2012 – 15/09/2015)

• Overall years of my Experience in the Construction (execution, installation Development of Work instruction, job descriptions, lists & relevant forms in accordance

• Conduction of self and internal audits

• Performing root causes analysis of Non-Conformance Report (NCR) Duties and Responsibilities:

• In knowledge of HVAC Equipment such as Package Unit, AHUs, Fans, Pumps, HVAC Ductwork and Pipework

• Preventive Maintenance and Schedules, Daily, Monthly and Annual Checklists and Record keeping according to ISO-9001 Requirements/ Formats Workout and prepare work breakdown (activity list) for new projects

• Provide Technical Assistance to the construction team as needed. Review material acquisitions, RFIs, submittals, and ensure contract performance measures are met per the position discipline. Raising NCR for maintain Quality. Evaluate the project construction to ensure compliance with standards for mechanical systems Installation of plant piping and design review according to standard, ASTM, ASME.

• Working experience on Different Standard. (API 650, 620,510, 570) standard, ASME, ASTM, AWS D 1.1). NFPA, AWWA.

• Supervisor, for tank erection for in al Qassim power plant & SWC water distribution project To check the material (Supplied) incoming of the tanks in the light of the packing list and drawing & to report to my chief about any missed items or incorrect material such as: check the shell course sheets; its thickness; its quantities; its dimension.

• ISO and HSE Related activities for Production Planning & Control Division Abdul Ali Al Ajmi Company Saudi Arabia

Mechanical Engineer over all KSA (Aramco Project) (07/2010- 12/2012)

• Understanding of Isometrics, P&IDs, General Arrangement Drawings (GAD), Isometrics marking, cutting plans, BOQ and Welding calculations.

• Extraction of BOQ/Material Take Off from isometrics,

• Inspection of all incoming material including pipes, fittings, consumables and valves.

• Responsible for all activity’s QA/QC regarding Piping.

• Discussion with client regarding any piping modification.

• Maintain the piping fabrication & installation record.

• Raise the Corrective Action Request if observing any Violation of QC procedure. • Inspection of the welding including Gas tungsten Arc Welding (GTAW), Shielded Metal

• Discussion with client regarding any piping modification.

• Ensure full compliance with company safety regulations and HSE management systems

Planning, Scheduling and Procurement on Power Plant Workshop Duties and Responsibilities:

• Major Jobs Executed:

• Provide prompt supervision and technical Oversight during the installation of Fire water Network Line for Refinery Up gradation project.

• Joint inspection of underground pipelines and preparation of Dossier to hand over the Client.

• Complete refurbishment of Storage tank and replacement of foam lines.

• Fabrication welding and installation of piping system of pumps.

• Re-routing of above and underground pipelines during Site clearance of Refinery Up gradation project.

• Construction of new storage tanks along with its associated piping. Siemens Engineering Construction Company Ltd, Karachi Pakistan As Site Mechanical Engineer Eni Gas Filed Project Sindh Pakistan

(05/2008 – 06/2010 )

• Ensure that all insulation materials are correctly applied. In particular to ensure that cryogenic pipe insulation is applied with the correct vapors barriers and that cladding does not use screws which penetrate the vapors barrier.

Ensure that testing is carried out using the correct medium i.e. pneumatic on all systems unless they contain water or steam.

Ensure adequate safety distances during pneumatic testing.

Ensure that all oxygen closing welds are inspected and signed off and that records are adequately kept of these inspections

Ensure all necessary QC checks are carried out and that weld quality processes are maintained. Ensure that all documentation is compiled as construction progresses and that this is checked and complete • Provision of emergency overflow to off-spec ponds and construction of the off-spec storage facilities.

• Final effluent storage, sludge treatment and intermediate storage and auxiliary systems; All buildings, tanks, civil, mechanical, and electrical works included in the FEED design.

• Ensuring the correct installation of piping, pipe supports valves and other in-line equipment in accordance with the drawings, specifications, and standards. PAINTING & INSULATION: Painting: I have also worked as a Engineer in Painting of piping & equipment’s (Anti- Corrosive Coatings).

Responsibilities:

Responsible for carrying and verifying the work at various construction points Such as: Ensuring of surface preparation,

• Surface preparation performing.

• Monitoring of weather conditions.

• Evaluation of compressor (Air cleanliness) and surface preparation equipment.

• Ensuring availability of arrived painting material as per approved project specifications.

• Managing witnessing & Inspection of painting mixing.

• Determination of Dry Film Thickness using DFT meter before inspection Project Management Related Activities.

• Monitors Contractor's submittals to local authorities and ensure that they are carried out in a timely manner in accordance with the contract document.

Got three times “Performance of excellent Demonstration” letter from My Directorate.

• Analyse and communicate complex ideas clearly and concisely.

• Self-motivated and enthusiastic with proven teamwork.

• Excellent verbal communication and planning skills.

• User level computer skills like Internet, Office applications.

• Ability to work unattended in long shifts without losing concentration.

• Well organised and able to plan and prioritise accordingly.

Microsoft CAM

Microsoft Office Applications

AutoCAD-2010 for Drawing

• Bachelor of Science in Mechanical Engineering May, 2008 Quaid-e-Awam University of Engineering & Technology Nawab Shah

• Higher Secondary School Certificate (Pre-Engineering) 2003 Superior Science College Khairpur Mirs, Sindh

• Secondary School Certificate (Science) 2000

Govt Boys higher Secondary School Mehrabpur

AFFILIATION WITH PAKISTAN ENGINEERING COUNCIL

PEC REGISTERED NO ME /21189

AFFILIATION WITH SAUDI ENGINEERING COUNCIL

SEC REGISTERED NO ME -127402

AFFILIATION WITH HIGHER EDUCATION COMMISSION OF PAKISTAN HEC REGISTERED NO ME- /1773/04ME72

HEALTH & SAFETY ENGINEERING COURSES UK

1: FIRE FIGHTING COURSE REGISTERD IN UK (URS).

2: IOSH Safety Management Course. 3 SCAFFOLDING SAFETY. AWARDS & ACHIEVEMENTS

KEY SKILLS

COMPUTER SKILLS

EDUCATION

PROFESSIONAL CERTIFICATIONS

4 CANFINED SPACE SAFETY.5 HAZARDS COMMUNICATION.

From Karachi Safety International Trends Institute. APPROVED

1: APPROVED FROM MOI (MINISTRY OF INTERIOR) SAUDI ARABIA. 2: APPROVED FROM SEC (SAUDI ELECTRICITY COMPANY). K.S.A 3. ARAMCO PLANT ERRECTION SECTION ENGINEER

4: APPROVED AS MECHANICAL ENGINEER SWCC PROJECT KSA Exceptional command over written and spoken English, Urdu, Sindhi, Arabic

• Passport No: RG1158413

• CNIC No: 45206-7692841-7-5

• Valid Pakistan Driving License.

Valid Saudi Arabia Driving License

• Nationality: Pakistan

• DOB: 12-01-1985

• Iqama: Transferable Immediate Join

Mobile No: +966********* E-mail: ad12tj@r.postjobfree.com QUALITY IS MORE IMPORTANT THAN QUANTITY

Personal Detail

Contact this candidate