Mechanical Engineer Design

Thomas Spilski, Jr.

N**** Oneida Road, Menasha, WI. 54952

Home 920-***-****, ********@*******.***

Cell 920-***-****

Mechanical Engineer, Industrial Engineering

SUMMARY OF QUALIFICATIONS

As a Design Engineer who has utilized a “hands on” approach, I feel that my skills encompass the full spectrum of the engineering field. Not only am I trained and proficient in various CAD systems such as Catia V4/V5 and AutoCAD, I am well versed on the manufacturing end of the business.

I have developed detailed project proposals and presented recommendations to senior partners, such as design improvements and cost reductions. I was instrumental in standardizing working drawings and specification sheet formats across subcontractors to improve communication. I have applied OSHA and EPA requirements and prepared documents to support the permit and inspection process. I am familiar with the ISO 9001:2000 Quality System, and was involved in implementing the “Just in Time” manufacturing process.

RELEVANT EXPERIENCE AND SKILLS

Additional attributes to my career include working with mass control devices, mechanisms, rigging, temperature control systems, machining, basic electricity, calibration, and instrumentation. I also command a working knowledge of diesel engines. I am competent in the use of various software including, Windows, Word and PowerPoint. I have effective management, technical and supervisory skills and am recognized for long hours, commitment to customers, and attention to detail, professionalism, and diligent follow-up work. I proudly work well as a team member or independently.

EMPLOYMENT

2019 to 2021 Kimberly clark. Mechanical Engineer. Improve productivity, waste, training, documentation, statistics, materials quality, s5,redesign of parts, machine. Quality runs, new products documentation and qualifications codes

2010-2018 Vision Quest Metal Design Manager sales design engineer maintenance fabrication custom metal art

2008-2010 Mechanical Engineer – Adecco (GE Gas and Oil, Oshkosh, Wisconsin

At General Electric, I work on vendor quality issues, machine fit up, and performance. Work on supplier

Supplier deviation reports, non-conforming parts reports. This is for the High speed Reciprocating

b Compressors. Dedicated to continuous improvement of crankshaft and crankcase performance .

2007-2008 Manufacturing Engineer Oldenburg Group Incorporated. Iron River, Michigan.

At Oldenburg, I route all manufactured assemblies, piece parts. All engineering changes. Work

with floor and engineering on all process improvements. This is on mining machines, drills,

Supply trucks, service trucks. Document all processes and improvements Lean manufacturing

Principles. ISO standards. Design and reengineer products. Cell manufacturing.

The routing includes all machining, mazaks, lathes, boring bars, machining centers, brakes,

In addition, welding centers.

2005-2007 Design Engineers - Aerotech (Oshkosh Truck Corporation), Oshkosh, Wisconsin

At Oshkosh Truck, I was assigned to the Defense Product Center. Using Catia V4/V5, I

Designed parts and assemblies for 6, 8 and 10 wheel drive, heavy duty, armor plated military

Vehicles for the United States Marine Corps. I worked on the chassis, hydraulics, platforms,

Cab, davit system, armor plating and the fuel and electrical systems. I implemented

In addition, procedures using military specifications. I created engineering drawings & applied

G, D & T and welding symbols. I was responsible for a wide variety of products, which I

Designed on the computer. I followed up with them in the plant to ensure proper installation.

2004-2005 Quality Technicians - Cadre (Oshkosh Truck Corporation), Oshkosh, Wisconsin

At Oshkosh Truck, I was assigned to the New Product Division, building military and

Proto-type trucks using multiple tools and machinery. I made suggestions to the engineers

For improvements, noting problems in the designs. I helped to develop the new commercial

Hybrid program. Military specifications and procedures were applied to this program. Hybrid

Engines, motors, side plates, routing of all hoses, computer controlled systems, modules, inter

Gears and motors. Redesign and manufacture of components and controls for all system.

Hangers. Setting up procedures for assembling of all hybrids,

2003-2004 Surface Mount Technician - Aerotek (Plexus Corporation), Neenah, Wisconsin

At Plexus Corporation, I was assigned to surface mounting. I built and tested circuit

Boards using machines and testing equipment. I used soldering equipment to fix circuits.

1999-2002 Manager - Appleton Steel, Menasha, Wisconsin

At Appleton Steel, I designed farm equipment for trimming cow’s hoofs, using multiple

Tools and equipment. Also welded and performed machining operations. I managed the

Shop floor and office operations. I sold steel to commercial and the private sector.

.

1997-1999 Lead Assemblers - Leach Corporation, Oshkosh, Wisconsin

At Leach Corporation I assembled and designed hydraulic pluming and electrical

Connections from the body and cab, using multiple tools and equipment. I helped

Develop zero inventories for “Just in Time” manufacturing.

1993-1997 Foreman - Kinetic Systems Incorporated, Menasha, Wisconsin

At Kinetic Systems I was assigned to manufacturing palletizers and proto-type

Machines. I welded and designed equipment for palletizers. I used multiple tools and

Machinery, painted, fabricated, machined, tested, controlled inventory and did

maintenance.

I designed, built, and installed conveyor systems...

1986-1992 Mechanic - Pierce Manufacturing Company, Appleton, Wisconsin

At Pierce Manufacturing I was assigned to the service center, where I inspected, and road

Tested trucks and rebuilt brakes, suspension, water pumps, water tanks and diesel engines,

Using multiple tools and machines.

1982-1986 Corporal, Engineer - United States Marine Corps, USA, Far East

I performed duties as a United States Marine and engineer, working on heavy eq

In addition, machinery. I worked in many echelons of service. Much experience was gained at

Rebuild shop for Whites, Onans and Detroit Diesel engines. First, I am a Marine.

EDUCATION

2005 Associate, Certificate, Industrial Engineering - Fox Valley Technical College. Appleton WI

GPA: 3.4. Awarded Dean's List.

2004 Associate, Mechanical Design Technician - Fox Valley Technical College. Appleton WI

GPA: 3.2 CATIA V-4 and V-5, Designing and Drafting

2003 Associate, Materials, Planning and Control - Fox Valley Technical College. Appleton WI

GPA: 4.0 Quality Control, MRP, Purchasing, Inventory

2000 Certificate, Industrial Engineering - Fox Valley Technical College. Appleton WI

1995 Certificate, Diesel Technology - Palomar Community College. Palomar CA

1983 Certificate, Engineering - Marine Corps Engineering School. Camp Lejeune NC

HONORS Good Conduct Medal - United States Marine Corps, 1982 – 1986

REFERENCES Available upon request

Reference:

Paul Bahr

West 3254 County road H

Pine River WI 54965-8273

Home phone 920-***-****

Work phone 920-***-**** ex 22913

Oshkosh Truck Corporation Office Manager/ Trainer

Tim Kasten

2700 Meadowview Street

Kaukauna WI 54130

Home phone 920-***-****

Work phone 920-***-****

Appleton Steel manager/owner

Greg John

P.O. box 335

Prescott WI 54021

Work phone 866-***-****

Githci Gaming Incorporated/owner

Keith Picard

260 Twin Harbor Drive

Winneconne, WI 54986

Home phone 920-***-****

Work phone 877-***-****

Val Fab, Incorporated/owner

Lori Smith

1509 East Wyndmere Drive

Appleton, WI 54915

Home Phone 920-***-****

Schneider Truck/Senior Transformation Business Partner

Bob Woitalla

1256 Oregon Street

Oshkosh, WI 54902

Cell Phone 920-***-****

Work Phone 920-***-**** ex 5493

Oshkosh Truck Corporation/Senior Project Engineer

Contact this candidate