ABS *.*

CLEAR-CUP REPLACEMENT DISPENSER INSTALLATION

Release Date:

Publication Number: 620072694INS

Revision Date: April 24, 2020

Revision: 0.0

Visit the Cornelius web site at www.cornelius.com for all your Literature needs. Notice

The products, technical information, and instructions contained in this manual are subject to change without notice. These instructions are not intended to cover all details or variations of the equipment, nor to provide for every possible contin gency in the installation, operation or maintenance of this equipment. This manual assumes that the person(s) working on the equipment have been trained and are skilled in working with electrical, plumbing, pneumatic, and mechanical equip ment. It is assumed that appropriate safety precautions are taken and that all local safety and construction requirements are being met, in addition to the information contained in this manual. This Product is warranted only as provided in Cornelius' Commercial Warranty applicable to this Product and is subject to all of the restrictions and limitations contained in the Commercial Warranty. Cornelius will not be responsible for any repair, replacement or other service required by or loss or damage resulting from any of the following occurrences, including but not limited to, (1) other than normal and proper use and normal service conditions with respect to the Product, (2) improper voltage, (3) inadequate wiring, (4) abuse, (5) accident, (6) alteration,

(7) misuse, (8) neglect, (9) unauthorized repair or the failure to utilize suitably qualified and trained persons to perform ser vice and/or repair of the Product, (10) improper cleaning, (11) failure to follow installation, operating, cleaning or mainte nance instructions, (12) use of non authorized parts (i.e., parts that are not 100% compatible with the Product) which use of voids the entire warranty, (13) Product parts in contact with water or the product dispensed which are adversely impacted by changes in liquid scale or chemical composition. Correct Disposal of this Product

RECYCLE

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To pre vent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to pro mote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Trademarks and Copyrights:

This document contains proprietary information and it may not be reproduced in any way without permission from Cornelius. This document contains the original instructions for the unit described. CORNELIUS INC

101 Regency Drive

Glendale Heights, IL

Tel: +1-800-***-****

Printed in U.S.A.

Contact Information:

To inquire about current revisions of this and other documentation or for assistance with any Cornelius product contact: www.cornelius.com

800-***-****

ABS 2.0 Cup-Dispenser Replacement Manual

© 2020, Cornelius Inc. - 1 - Publication Number: 620072694INS SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

Safety Overview

• Read and follow ALL SAFETY INSTRUCTIONS in this manual and any warning/caution labels on the unit

(decals, labels or laminated cards).

• Read and understand ALL applicable OSHA (Occupational Safety and Health Administration) safety regulations before operating this unit.

Recognition

DIFFERENT TYPES OF ALERTS

! DANGER:

Indicates an immediate hazardous situation which if not avoided WILL result in serious injury, death or equipment damage.

! WARNING:

Indicates a potentially hazardous situation which, if not avoided, COULD result in serious injury, death, or equipment damage.

! CAUTION:

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury or equipment damage. SAFETY TIPS

• Carefully read and follow all safety messages in this manual and safety signs on the unit.

• Keep safety signs in good condition and replace missing or damaged items.

• Learn how to operate the unit and how to use the controls properly.

• DO NOT Let anyone operate the unit without proper training. This appliance is not intended for use by children. Children should be supervised to ensure that they do not play with the appliance.

• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.

• Keep the unit in proper working condition and do not allow unauthorized modifications to the unit.

Recognize Safety Alerts

This is the safety alert symbol. When you see it in this manual or on the unit, be alert to the potential of personal injury or damage to the unit.

!

ABS 2.0 Cup-Dispenser Replacement Manual

Publication Number: 620072694INS - 2 - © 2020, Cornelius Inc. QUALIFIED SERVICE PERSONNEL

! WARNING:

Only trained and certified electrical, plumbing and refrigeration technicians are to service this unit. ALL WIRING AND PLUMBING MUST CONFORM TO NATIONAL AND LOCAL CODES. FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY, DEATH OR EQUIPMENT DAMAGE.IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD.

SAFETY PRECAUTIONS

• This unit has been specifically designed to provide protection against personal injury. To ensure continued protection observe the following:

• Access to the service area is restricted to persons having knowledge and practical experience of the appliance, in particular as far as safety and hygiene are concerned.

! WARNING:

Disconnect power to the unit before servicing following all lock out/tag out procedures established by the user. Verify all of the power is off to the unit before any work is performed. FAILURE TO DISCONNECT THE POWER COULD RESULT IN SERIOUS INJURY, DEATH OR EQUIPMENT DAMAGE.

! CAUTION:

Always be sure to keep area around the unit clean and free of clutter. FAILURE TO KEEP THIS AREA CLEAN MAY RESULT IN INJURY OR EQUIPMENT DAMAGE.

CO2 (CARBON DIOXIDE) WARNING

! DANGER:

CO2 displaces oxygen. Strict attention MUST be observed in the prevention of CO2 gas leaks in the entire CO2 and soft drink system. If a CO2 gas leak is suspected, particularly in a small area, IMMEDIATELY ventilate the contaminated area before attempting to repair the leak. Personnel exposed to high concentrations of CO2 gas experience tremors which are followed rapidly by loss of consciousness and DEATH.

ABS 2.0 Cup-Dispenser Replacement Manual

© 2020, Cornelius Inc. - 3 - Publication Number: 620072694INS CUP DISPENSER REPLACEMENT

Small and Medium Clear-Cup Dispenser Replacement Procedure Remove the Small Size, clear-cup dispensers and replace them as described in Table 1. Table 1.

Action Figure

1. Open the turret door by opening the UI door and pulling the door release. 2. Shut off electrical power to the ABS 2.0 unit.

3. Manually rotate the turret for access to the first Small Size cup dispenser to be replaced. a. For access to the upper mounting screw, grasp the upper ring of the cup dispenser and rotate it clock- wise to unlock it. Then lift it up and off of the cup dispenser. b. Remove the mounting screw from the cup dispenser, lift the dispenser to align the mounting stud with the turret keyhole slot and then withdraw the dispenser cup. 4. Align the mounting stud of the new cup

dispenser with the keyhole slot in the turret, then slide the cup dispenser down.

Figure 1.

Small

5. Install the mounting screw in the bottom hole

of the cup dispenser and use a Phillips

screwdriver to drive the screw into the lower of

the two threaded holes on the turret, as shown.

Do Not over-tighten the mounting screw.

Figure 2.

ABS 2.0 Cup-Dispenser Replacement Manual

Publication Number: 620072694INS - 4 - © 2020, Cornelius Inc. Medium

6. Install the mounting screw in the top hole of

the cup dispenser. Use a Phillips screwdriver to

drive the mounting screw into the upper hole of

the two threaded holes of the turret. Be sure to

not over-tighten the screw.

Figure 3.

7. Install retainer ring:

a. After the cup dispenser is installed, orient

the retainer collar so its locking slot is aligned with the stop on the cup dispenser body, as

shown.

b. Support the bottom of the cup dispenser

and then press the retainer collar down onto

the cup dispenser body.

Figure 4.

8. Rotate the retainer collar counter-clockwise

until the stop of the cup dispenser is fully

engaged with the slot of the retainer collar.

Figure 5.

9. Resume normal operation of the ABS 2.0 unit.

Table 1.

Action Figure

ABS 2.0 Cup-Dispenser Replacement Manual

© 2020, Cornelius Inc. - 5 - Publication Number: 620072694INS Cornelius Inc.

www.cornelius-usa.com

Contact this candidate