Jacob Parker

Welder Helper, welder, heavy equiptment operator

Contact

Email:

ad0jej@r.postjobfree.com

Phone:

318-***-****

Address:

New Caney, 77357

Career Objective

1.Efficient professional with 10 years of experience and a proven knowledge of regulatory compliance, research and development and work methods analysis. Aiming to leverage my abilities to successfully fill the welder,Equipment operator role at your company. 2. Hard worker experienced in problem-solving, service and time management. Aiming to leverage my abilities to successfully fill the welder, heavy equipment operator role at your company. 3. Adaptable professional with 10 years of work experience and proven knowledge of leadership, problem-solving, and workflow prioritization. Aiming to leverage my abilities to successfully welder,heavy equipment operator role at your company. 4.Detail-oriented professional with excellent communication, interpersonal and creative thinking skills. Aiming to leverage my abilities to successfully fill the vacancy at your company. Frequently praised as hardworking by my peers, I can be relied upon to help your company achieve its goals.

Experience

Heavy Equipment Operator, welder

Eci Directional Drilling, Conroe, Tx / Jul 2022 - Dec 2022 Operating an excavator to add as well as remove the drill pipe off the drilling rig.

Monitored operations to ensure that health and safety standards were met. Drove and maneuvered equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation and rocks and to distribute and level earth and terrain.

Coordinated positioning or moving loads in response to hand or audio signals from crew members.

Moved dirt, rocks, equipment and other materials.

Kept records of material and equipment usage and problems encountered. Inspected and prepped material surfaces by removing slag and rust. Used grinders and hand tools to buff workpiece edges and verify secure fit. Used wire brushes, portable grinders and chemical baths. Designed project-specific jigs to support workpiece alignment and complete fabrication.

Connected hydraulic hoses, belts, mechanical linkages and power takeoff shafts to tractors.

Required equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.

Maintained equipment, making emergency adjustments and assisting with major repairs as necessary.

Learnt and followed safety regulations.

Hammered out bulges and bends in metal workpieces. Operated loaders to pull out stumps, rip asphalt and concrete, and rough-grade properties.

Took actions to avoid potential hazards and obstructions. Monitored assembly processes to avoid warping or shrinking caused by overheating. Shaped parts using cutting torches and straightening presses to achieve desired results.

Detected faulty operation of equipment and defective materials and notified supervisors.

Ignited torches and started power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Welded components in flat, vertical, or overhead positions. Controlled heavy equipment attachments.

Measured and inspected finished workpieces and verified gaps and allowances for quality control.

Operated safety equipment and use safe work habits. Examined workpieces for defects and measured workpieces with straightedges and templates to ensure conformance with specifications. Operated bulldozers, trench excavators, road graders and backhoes. Aligned machines, cutterheads and depth gauge makers with reference stakes and guidelines and ground and position equipment, following hand signals of other workers.

Cleaned and organized work sites to reduce team hazards and boost productivity. Leveraged skill in arc, mig and tig welding to fabricate or repair diverse structures.

Observed safety protocols and reported hazards to management. Drove tractor-trailer trucks to move equipment from site to site. Checked fuel supplies at sites to ensure adequate availability. Welder

Texas Final Drive, Magnolia, tx / Apr 2022 - Jun 2022 Shaped parts using cutting torches and straightening presses to achieve desired results.

Operated metal shaping, straightening and bending machines, such as brakes and shears.

Hammered out bulges and bends in metal workpieces. Documented labor hours and materials used to track expenses. Monitored assembly processes to avoid warping or shrinking caused by overheating. Used grinders and hand tools to buff workpiece edges and verify secure fit. Used hoists, cranes, wire and banding machines and hand tools. Guided electrodes on or across workpieces to straighten, bend, melt, or build up metal.

Detected faulty operation of equipment and defective materials and notified supervisors.

Ignited torches and started power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Designed project-specific jigs to support workpiece alignment and complete fabrication.

Cleaned and organized work sites to reduce team hazards and boost productivity. Leveraged skill in arc, mig and tig welding to fabricate or repair diverse structures.

Set up and used ladders and scaffolding as necessary to complete work. Melted and applied solder along adjoining edges of workpieces to solder joints, used soldering irons, gas torches and electric-ultrasonic equipment. Labeled material with job number and required data to foster seamless operations. Examined workpieces for defects and measured workpieces with straightedges and templates to ensure conformance with specifications. Measured and inspected finished workpieces and verified gaps and allowances for quality control.

Required equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.

Welded components in flat, vertical, or overhead positions. Operated safety equipment and use safe work habits. Monitored supply inventory and proactively requisitioned required items to prevent delays.

Supported on-time project completion by prioritizing critical tasks and delegating overflow to helpers.

Heavy Equipment Operator

Troy Pipeline, Houston, tx / May 2017 - Mar 2019

Operated bulldozers, trench excavators, road graders and backhoes. Took actions to avoid potential hazards and obstructions. Kept records of material and equipment usage and problems encountered. Operated loaders to pull out stumps, rip asphalt and concrete, and rough-grade properties.

Located underground services, such as pipes and wires, prior to beginning work. Drove and maneuvered equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation and rocks and to distribute and level earth and terrain.

Connected hydraulic hoses, belts, mechanical linkages and power takeoff shafts to tractors.

Controlled heavy equipment attachments.

Coordinated positioning or moving loads in response to hand or audio signals from crew members.

Aligned machines, cutterheads and depth gauge makers with reference stakes and guidelines and ground and position equipment, following hand signals of other workers.

Maintained equipment, making emergency adjustments and assisting with major repairs as necessary.

Learnt and followed safety regulations.

Monitored operations to ensure that health and safety standards were met. Operated equipment to demolish and remove debris and to remove snow from streets, roads and parking lots.

Moved dirt, rocks, equipment and other materials.

Selected and hitched bulldozer blades or other attachments to tractors. Guided movement of tractor-drawn machines.

Talked to clients and study instructions, plans, or diagrams to establish work requirements.

Performed specialized work involving pile drivers, dredging rigs, drillers and concrete pumpers.

Pushed other equipment when extra traction and assistance was required. Checked fuel supplies at sites to ensure adequate availability. Heavy Equipment Operator

Local 450 iuoe, Dayton, tx / Feb 2015 - May 2017

Operated loaders to pull out stumps, rip asphalt and concrete, and rough-grade properties.

Operated bulldozers, trench excavators, road graders and backhoes. Located underground services, such as pipes and wires, prior to beginning work. Operated tractors and bulldozers to perform such tasks as clearing land, mixing sludge, trimming backfills and building roadways and parking lots. Maintained equipment, making emergency adjustments and assisting with major repairs as necessary.

Kept records of material and equipment usage and problems encountered. Selected and hitched bulldozer blades or other attachments to tractors. Took actions to avoid potential hazards and obstructions. Aligned machines, cutterheads and depth gauge makers with reference stakes and guidelines and ground and position equipment, following hand signals of other workers.

Guided movement of tractor-drawn machines.

Learnt and followed safety regulations.

Coordinated positioning or moving loads in response to hand or audio signals from crew members.

Moved dirt, rocks, equipment and other materials.

Connected hydraulic hoses, belts, mechanical linkages and power takeoff shafts to tractors.

Controlled heavy equipment attachments.

Drove and maneuvered equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation and rocks and to distribute and level earth and terrain.

Monitored operations to ensure that health and safety standards were met. Operated equipment to demolish and remove debris and to remove snow from streets, roads and parking lots.

Performed specialized work involving pile drivers, dredging rigs, drillers and concrete pumpers.

Drove tractor-trailer trucks to move equipment from site to site. Tested atmosphere for adequate oxygen or explosive conditions when working in confined spaces.

Operated compactors, scrapers and rollers to level, compact and covered refuse at disposal grounds.

Checked fuel supplies at sites to ensure adequate availability. Operated road watering, oiling and rolling equipment, and street sealing equipment. Compiled cost estimates for jobs.

Talked to clients and study instructions, plans, or diagrams to establish work requirements.

Pushed other equipment when extra traction and assistance was required. Heavy Equipment Operator

Strike Pipeline, Houston, Tx / Mar 2016 - Jan 2017 Performed routine and scheduled maintenance services. Conducted staff meetings to relay general information or to address specific topics.

Demonstrated ability to manage multiple tasks while remaining adaptable and flexible.

Met deadlines while maintaining high-quality deliverables. Provided efficient and courteous service to customers at all times. Developed departmental objectives, budgets, policies, procedures and strategies. Worked with coworkers to complete tasks.

Performed general maintenance and repair.

Defined problems, collected data, established facts and validated conclusions. Participated in ongoing training to enhance own job skills and knowledge. Adhered to quality and service standards to support operational goals. Assisted with new hire orientation and employee training. Laborer Foreman

Laney Directional Drilling, Houston, tx / Jan 2012 - Oct 2015 Inspected work progress, equipment and construction sites to verify safety and to ensure that specifications were met.

Ordered or requisitioned materials or supplies.

Suggested and initiated personnel actions, such as promotions, transfers and hires. Coordinated work activities with other construction project activities. Analyzed worker and production problems and recommended solutions, such as improving production methods and implementing motivational plans. Assigned work to employees, based on material and worker requirements of specific jobs.

Provided assistance to workers engaged in construction and extraction activities, using hand tools and other equipment.

Estimated material or worker requirements to complete jobs. Trained workers in construction methods, operation of equipment, safety procedures, or company policies.

Located, measured and mark site locations and placement of structures and equipment, using measuring and marking equipment.

Arranged for repairs of equipment and machinery.

Read specifications, such as blueprints, to determine construction requirements or to plan procedures.

Supervised, coordinated and schedule activities of construction and extractive workers.

Conducted staff meetings to relay general information or to address specific topics.

Adhered to quality and service standards to support operational goals. Demonstrated ability to manage multiple tasks while remaining adaptable and flexible.

Responded quickly to meet customer needs and resolve problems. Provided product information and resolved concerns to assist customers. Education

Louisiana Youth Challenege

Minden, La

High School Diploma

(Jan 2011)

Relevant Coursework :

GED

Awards & Honors :

Most athletic

Extracurricular Activities :

#1 In my class

Tulsa Welding School

GPA: 3.7

Houston, Tx

Certification

Welding(Aug 2023)

Skills

Welding

Mechanical repair

Secure job safety

Fabricate and fix any metal broken component

Maintance the equiptment

Make sure everything from safety to producting is accurate and performed correctly Bulldozer Operations

Air Compressor Use

Loading and Unloading

Materials Transport

Team Collaboration

Debris Removal

Commercial Construction

Company Quality Standards

Job and Task Observation

Site Prep

Following Directions

Maintenance Documentation

Moving and Leveling Dirt

Safety Procedures

Personnel Protection

Inclement Working Conditions

Water and Sewer Piping

Team Leadership

Proficiency with Attachments

OSHA 10 Certification

Subcontractor Relations

Heavy Equipment Operator

Effective Communication Skills

Safety Program Understanding

Ground Disturbance Oversight

Routine Cleaning

Backhoe Operation

Road Construction

Loader Controls

Lever Controls

Certifications

Forklift Certification

References

Daniel Stalsby Parker, Pipeline Inspector, Pipeline Inspection

318-***-**** - ad0jej@r.postjobfree.com - Co-worker

Gregory Bromund, PA, Triple Canopy

321-***-**** - ad0jej@r.postjobfree.com - Step Father

Dorian Holliday, Certified Welding Inspector, Tulsa Welding School

480-***-**** - ad0jej@r.postjobfree.com - Welding Instructor Volunteer Experience

Owner

Jake's helping hand, New Caney, tx / May 2019 - Present

-Pressure washing services -Help elderly

-Yard management services -Home Cleaning

Contact this candidate