.

.

INFORMATION ADDRESS

BOSQUE DATILES MZ ** LT9 B

FRACC REAL DEL BOSQUE 54948

TUTLTITLAN EDO DE MEX

Mexico.

MOBIL 554-***-****

HOUSE:(55) 25933992

ad0cbz@r.postjobfree.com.

mx

INTERNATIONAL TRAINING AND SKILLS

Laser Tracker Operation. Use of

LeicaTracker with Software Metrolog XG

and EmScon to determine root causes

and solve quality problems, IQ parts

inspections, leveling of tools and tool

certifications. CMM Machine Operation

Knowledge of the Pcdims cad++ suite in

version 3.7 MR4, data page and data

view, for quality inspection and failure

analysis, as well as for opportunities for

improvement. 3D Modeling in Catia V5.

3D modeling in Ideas. Visualization

Mockup. Modeling and manipulation of

parts and assembly and making of cuts.

Jose Manuel Castillo

Escamilla

3D Modeling in Catia V5. 3D Modeling in NX version 5.03D; Modeling in Ideas Visualization Mockup. Modeling and manipulation of parts and assembly and making of cuts. Generation of geometry for alignment of measuring machinery. Minitab 14. Statistical process control. Dimensional Metrology and Interpretation of Plans. Geometric dimensioning and tolerancing. Under the standard of ASME Y-14. Black belt, rede x.Interface DME calibration ZEISS. Induction to system vision and perceptron. Reverse Engineering

(digitalization) GOM (atos xl vers. 7.5). Optical measuring techniques; reverse engineering digitalization and inspection.

SCHOOL: COLLEGE OF PROFESIONAL TECHNICAL EDUCATION TITLE PLANTEL GUSTAVO BAZ, Tlalnepantla de Baz, MEX 01/2001 - 06/2004

Technical degree in Industrial Productivity:

ENGINEER INDUSTRIAL

WORK EXPERENCE

COSMA MAGNA SAN LUIS POTOSI MEXICO S.A C.V - Dimensional Quality Engineer Lead AUTOTEK MAGNA INDUSTRIAL DE MEXICO S.A C.V - Dimensional Quality Engineer San Luis Potosí, SLP 10/2022 - Actual

Coordinate dimensional laboratory technicians: (9 Metrologists, 3 SPC Analyst, and 1 Calibration Technician). Ensure MSA Studies, Gage R&R, Problem Solving, 8D Elaboration, 5 Why, Ishikawa, Root Cause. Implementation and follow-up of corrective actions: FMEA, Control plan, Flow diagram, Dimensional PIST, Continuous improvement processes. Development of strategies for inspection programs (PCDMIS). Homologation of measurement methods with customers in the plant. Preparation of reports to senior management (KPIs, dimensional problems, etc.). Planning and Resource Management for construction - purchase, installation and commissioning of metrology equipment. Responsible for internal and external audits of dimensional laboratory. ROBERT BOSCH AUTOMOTIVE STEERING S.A C.V QUERETARO - Quality Control – Metrology Program Specialist CMM

Querétaro, CHP 04/2016 - 05/2019

Ensure that dimensional control is within the standards and requirements of the Client VW for each project (Tiguan, PA Sport, Golf A-7) and new projects (GM & NISSAN). Approve methods of measurement with different customers; responsible for developing, maintaining, and improving measurement processes in quality lab; ensure that proper

.

.

Generation of geometry for alignment

of measuring machinery. Collector of

data ASI-Datamyte 501/Tran Send for

flush and clearance applications.

Minitab 14. Statistical process control.

Basic and advanced pneumatics.

Dimensional metrology and

interpretation of prints. Geometric

dimensioning and tolerancing. Under

the standard of ASME Y-14. Induction of

perceptron and correlation of

perceptron and CMM.

Training Magna Letter Magna, MAFAC,

(Core Tools AIAG, APQP, PPAP)

TRAINING BOSCH

CALYPSO 2016 Basic, Advanced and PCM

Curve GEAR, BPS, SPC Basic, MSA

AMERICAN VISA AND CANADIAN

VISA: APPROVED

inventory of spare parts for measurement equipment is maintained. Develop proposals and solutions for dimensional problem analysis of data with different areas and review

(Full Assembly) to ensure the smooth functioning of product delivered to the customer. Support APQP and PPAP activities, with feedback to manufacturing areas with measurement data for problem solving. Develop and implement new measurement equipment programs for: CMM, Mahr Surf LD-130 Roundness, Smartzoom 5, Axio Imager, and Discovery Mahr Vision 420 for new parts. Check that the means for measuring and the control devices comply with the requirements of ISO TS16949 for testing, identification, and maintenance thereof. Monitor the validation of design concepts and control means

(Checking Fixtures) until the purchase by the end customer. BOMBARDIER TRASPORTATION S.A C.V SAHAGUN HIDALGO - Quality Control - Dimensional Analyst (G&DT)

Hidalgo, HID 06/2014 - 07/2015

Coordinate 100% part specifications, sub-assemblies and major assemblies (KFE, KFM) and check fixtures and inspect to ensure dimensional aspects of the product are properly validated. Plan and develop inspection programs (software) to operate the 3D machine, and laptops Faro, Romer and Laser Tracker. Implement process support for Product Validation Manufacturing (AMEF, APQP). Prepare and maintain records (SPC) and dimensional reports in order to provide feedback and support decisions in key areas such as Engineering, Methods, Production and Quality. Implement continuous improvement processes, root cause analysis, and preparation of 8D. Ensure that assembly work meets the quality standards defined in the dimensional specifications of the product. Collect and provide dimensional data that helps other areas within the same team of Dimensional Engineering for the development of the corresponding project indicators (FTQ, KPIS). Monitor the schedule of important events for computers and peripherals such as calibration, consumables, and maintenance. Develop dimensional inspection routines with electronic means provided by the equipment and ensure R & R repeatability of measurements. Look for methods to optimize time invested in inspections. Recommend the use of systems or components to test error (GAGE GO-NO GO) and seek for them to be applied directly to the product. Rigorously follow dimensional inspections providing official issuance of system notifications (SAP QN) and feedback areas involved. Ensure through testing process that is performed to size is correct and effective, avoiding uncertainty. Clearly establish operating conditions with both the hardware and the software as recommended by manufacturers and experts in the field. Analyze the latest revision levels of devices and assembly templates and report them to area involved TAP TOLUCA ASSEMBLY PLANT CHRYSLER – Metrology Center– Team Leader Specialist

(CMM).

Toluca de Lerdo, MEX 03/2010 - 07/2013

Analysis with Meisterbock fixture. Perform R&R Studies. Interpretation of GDT plans. Chekin fixture certification. Analysis of mach metal, clearance and flush, alignment, clamping and welding. Participated in equipment calibration programs and in certification of calibration. Program parts in free state. Program with different alignments: plane, line, point, flat circle, circle line level, line. Realization of kaizen standards - quick kaizen. Analysis of root problems in subassemblies or in parts alone. Training of personnel in basic – advanced PCDMIS in different areas of Meisterbock part qualification. Work with ZEIIS machines with an interface for PCDMIS (DME). Creation of different alignment methods. Elaboration of job procedures (OPL, JOB INSTRUCTIONS) and verification of

(PROCESS PROCEDURES) Certification of production lines . Management of progress reports of results.

FORD MOTOR COMPANY - Dimensional Control – Specialist (CMM). Coordinate Cuautitlán Izcalli, MEX 01/2008 - 03/2010

Participate in the development of R&R studies. Make decisions for process improvement. Perform checkin fixture certification programs. Participate in the implementation of equipment calibration programs and certification of equipment calibration. Was the direct contact with providers for any mechanical failure that we could resolve. Participate in the design validation process, feasibility of assembly, and parts quality control, as well as purchasing of and corrections to the stamping dies. Made

.

Contact this candidate