Name

Efren Carrancho Salom ---PRC Reg No.*****

Senior Piping Mechanical Engineer /

Address/Contact Number

Provincial Address:(Mailing Address)

*** ******* **, ***** ******* II

Capas, Tarlac, Philippines, 2315

Mobile (Philippines): +630**********

PassPort Number P2377123B

Duration: 29June2019 to 28June2029

City Address:

25 Legal St., Sangandaan, Project 8

Quezon City 1106,

Philippines

Email: ad0616@r.postjobfree.com

Objective

Engaging Senior Engineering Executive with over twenty-five-plus years of engineering experience in industrial settings. Implemented quality control standards in accordance with client requests. Assisting especially adept at developing and implementing business development strategies to improve operations efficiency. Committed to motivating staff to achieve goals while ensuring efficient project completion of deliverables on time.

Job Summary

Mechanical Piping Engineering with over twenty-five (25) years of combined experience in design and engineering of static equipment and piping for Refinery Complex, Gas and crude oil processing facilities. (Offshore and Onshore oil).

Familiar with international codes/standard such as ASME, ANSI, API, BS, DEP, MSS, JIS, NFPA

Senior Piping Mechanical Engineer - Responsible for adhering to the Life Cycle Asset Management (LCAM) process throughout the entire life cycle of new assets. Calculation of minimum thickness and remaining thickness life of static equipment. Perform evaluation and rerating of pressure per API 510. Pressure vessels and piping Materials Selections for design.

Prepare planning, scheduling, cost estimates of design work and stress calculation activities

WorkPack Piping/HVAC Engineer for offshore piping constructions and HVAC works per ASHRAE Standards, and other building codes

Resolve plant piping vibration issues and other complex issues relevant to operating plants. As Project Engineer, Evaluate and Monitor progress of contractors’ accomplishments.

Stress Lead Engineer for FEED / EPC Project, Familiar with Nozzle Pro

Oversee design and construction HVAC, Fire Protection Plumbing and Engineering Support to Construction

Estimator/Mechanical Piping Field Engineer-Construction and Fabrication

Mechanical Engineer in Benguet Mining Corporation in Philippines

Education

Computer Literacy

Training

Bachelor of Science in Mechanical Engineering.

Saint Louis University, Baguio City, Philippines, 1978

SPR Model Design Review AutoCAD 2018 and AutoCAD 2016/ MicroStation 2D

ANSYS Fluid Flow Fluent (Basic) Fluid Flow Ver 3.3

CAESAR II Ver 8.0 Pipe Stress Analysis AutoPipe Pipe Stress Analysis Software

MS Planner for work scheduling Tank Ver 3.2

MS Office NozzlePro by Pauline Research

PVElite Software Carrier’s HAP 4.9 Software

SMART PLANT Enterprise Basic Training Course – PETRONAS – 2008

Harm Elimination And Recognition Training by Foster Wheeler Singapore

Design, Estimates and Construction Training by Sumitomo, Japan

Management and Supervision Workshop by A G & P, Inc.

Professional Memberships /Registration

Member Philippine Society of Mechanical Engineers (PSME)

Registered Mechanical Engineer at Philippine Regulation Commission (PRC)

Registration Number: 18797

Languages

English,Tagalog, Ilocano

mm/dd/yyyy)

Job Experience-

12/12/2022– present

Mechanical-HVAC Senior Engineer (Philippines) RBS ENGINEERS INC

Site visits to conduct testing, measurements and other quantitative methods to verify the veracity of our initial findings. Our purpose is to determine the status of the equipment considering its actual kW/TR efficiency, and compare it to its condition when it was installed, vs the new equipment offered in the market.

Performed HVAC heat load calculations by HAP 4.9

Rustan’s Ayala Investment Grade Energy Audit (IGEA) Project

6/15/2021– 09/16/22

Fire Protection Engineer -Senior Mechanical Engineer NexCo VCC JV Philippines

Review Project Specifications applicable to the DPWH Projects to assure that mechanical aspects are considered in final design of fire protection system inside the tunnel part of the project.

Review fire protection system design drawings as per materials specifications requirement of the project. Prepare RFI for equipment missed out from Bid Documents.

Review design of plumbing drawing of current project

Review fire water piping system as per project requirement of the project

Prepare project schedule estimates for the construction and procurement of mechanical and piping materials

Performed hydraulic analysis and Calculations of fire water protection system

Davao City Bypass Construction Project-DPWH Government Project

Richmond Tower Fire protection Project

7/15/2019 –5/15/2021

(1 yr-10 mos)

Piping HVAC Senior Engineer (Philippines) RBS ENGINEERS INC

Prepare hydraulic analysis fire sprinkler system of high rise building, NFPA 14. HVAC Load Calculations

Perform tests and troubleshoot existing systems. Recommend changes to the system to ensure good performance. Review the TAB procedures and reports

Prepare air distribution ducting plan and HVAC installation drawings for development by the draftsman.

Review HVAC related Design packages and provide comments on HVAC plans and detailed drawings as per specifications and complying with the respective standards.

Review material take offs and cost estimates for the work as applicable.

Participate in HVAC commissioning /completion activities, conduct walkthrough and prepare punch item list.

Assign maintenance manpower within his assigned area to meet daily changes in operating requirements and priorities.

Recommend special work schedules, overtime or contractor participation to meet unusual or emergency situations.

Provide technical support and/or work direction to Operation Technicians ensuring proper maintenance and repair for dependable operation in assigned central operation facility.

J&T Building Fire Sprinkler System-10 Storey Building Philippines

HITACHI GLOBAL SOLUTION TECHNOLOGY- HVAC System Upgrade

ETON Centris Station HVAC Air Distribution Upgrade Project –

ETON Properties Philippines Inc.

7/15/2017 - 6/15/2019

(2 yrs-0 mos)

Senior Piping Engineer GSD Philippines Inc

Performed, Prepared, reviewed and corrected piping isometric drawings by cloud system

Provide estimates of piping isometrics manhours preparations and submissions of isometric drawings using the cloud or online systems

Medupi and Kusile Power Stations Construction Projects

6/15/2015 - 6/15/2017

(2 yrs-0 mos)

Senior Piping Stress Engineer (Philippines) Fluor Daniel

Performing Pipe Stress analysis of Critical Piping Systems in accordance with ASME B31.3 Code requirements, using Caesar II software program, PDMS

Ensures project specifications are complete and accurate. Performs pipe stress analysis utilizing software such as CAESAR II. Performs detailed reviews of piping isometrics, piping plans, pipe specifications, P&IDs, and other design documents.

Provides input to piping group related to mechanical equipment and in doing so establishes the appropriate level of detail to ensure completeness and accuracy of design and construction cost.

Developed full pipe stress analysis procedures, pipe support design and structural loads Calcs.

Coordination with other disciplines, civil, mechanical and piping design.

Stress checking and selection of pipe support and springs Supports

Prepared, reviewed and corrected P&IDs, equipment and piping technical specifications for process and thermal cycle systems.

Provided comprehensive dynamic stress analysis for excessive vibration of rotating and reciprocating equipment and piping.

Reviewed Vendor data/ drawing for Oil storage tanks, heat exchangers and centrifugal, reciprocating or canned pumps affecting design and layout of piping around equipment. Prepared pipe stress critical line list as per Client requirements. Prepare piping stress man-hour estimates and oversee the works and activities Piping Stress Engineers on the project and request manpower if required. Resolve plant piping vibration issues and other complex issues relevant to operating plants. Report and Monitor progress of stress calculation activities. Provide input and coordinate the resolution of any technical/engineering issues related to the project. Support construction activities. Resolve site technical queries. Ability to prepare, review and check Piping Technical Requirements, Specification & Procedures such as: - Piping Design Specification and Criteria- Wall Thickness Calculations- Piping components technical requirements and specifications trunnion calculations and flange leakage analysis

CVO/BLO LyonDell Basell PROJECT- Modularization Project –LyonDell Basell USA-D

Wanhua Chemicals USA Project- Modularization Project- Detai Engineering

ENCANA CUTBANK RIDGE PROJECT- 3rd Generation Modularization Project –ENCANA CANADA-Detail Engineering

01/11/2011 – 6/1/2013

(2 yr- 5 mos)

Lead Pipe Stress Engineer (Singapore) Foster Wheeler

Supervise the stress analysis of piping systems using Caesar II software and preparation of stress analysis reports, incorporating contract specifications and international codes. as per with ASME B31.3 Code requirements, using Caesar II software program, PDMS

Review and checking third party Stress calculations and meeting with vendors

.

Design and selection of pipe support and springs Supports

Code Calc, Nozzle Qualifications of drums, vessels and rotating equipment

Prepared, reviewed and corrected P&IDs, equipment and piping technical specifications for process and thermal cycle systems.

Assisted of the constructability study of the Storage Oil tank and prepared assessment report of the installation

Development of mechanical equipment and piping material specifications ·

Produce calculations to inform design such as hydraulic modeling, pipe stress calculations, tank and pump sizing. Coordination with mechanical design team to direct completion of engineering drawings. Coordination with other disciplines

Monitor the transfer of piping loads to Civil Discipline, coordinate on technical issues as required. Prepared pipe stress procedures, critical line list as per Client requirements. Resolve plant piping vibration issues and other complex issues relevant to operating plants. Report and Monitor progress of stress calculation activities, pipe support design, spring data sheet preparation, piping routing checking, piping design check. Support construction activities. Resolve site technical queries. Check piping Design Specification and Criteria for Wall Thickness Calculations, Piping Material Specification (PMS), Pipe Support Drawings, Valve Specifications and Data Sheets.

Singapore Hydro De-Sulfurization Project –ExxonMobil-Detail Engineering

Jurong Lubes Expansion Project-FEED- ExxonMobil

5/15/2008 – 1/3/2011

(2 yrs-7 mos)

Principal Piping Engineer (Malaysia) MECIP Global Engineers JV PegasusTSI, USA

Excellent technical and practical engineering skills and ability to consistently deliver quality, accurate and timely work to company and its clients.

Excellent knowledge of the fundamental requirements of the piping engineering, and the basic requirements of other engineering fields.

Excellent knowledge of applicable local and international standards and statutory and regulatory specifications.

Competent use of relevant software such as MS Office Suite and piping engineering specific software.

Extensive technical and practical experience in piping engineering in the same or similar industry including experience in working in multi-disciplinary projects and teams.

Ensures project specifications are complete and accurate. Performs pipe stress analysis utilizing software such as CAESAR II. Performs detailed reviews of piping isometrics, piping plans, pipe specifications, P&IDs, and other design documents.

Stress analysis, pipe support design, spring data sheet preparation, piping routing checking, piping design check. Maintain piping specifications to current codes and standards. Review and recommend piping and valve material selection Generate piping material, piping components, mechanical valves, piping specialty items specifications for projects. Interfaces with Process Systems Group, piping designers, and Pipe Stress Engineers on issues concerning pipe specifications, valves, process design, and piping systems flexibility. Perform piping engineer design work as required: Code calculations such as MAWP, pipe wall thickness, branch reinforcement, bend and miter fittings pressure capacity, hydrostatic test pressure. Vendor data and drawing review and comments. Support construction activities. Resolve site technical queries.

Conducts inspection of complex, high visibility contract construction to ensure high quality work and assure compliance with quality control provisions contained in contract specifications.

Melaka Refinery Plant Upgrade-PETRONAS-Detail Engineering JV

3/15/2006 – 3/15/2008

(1 yr -0 mos)

Senior Piping Engineer (Thailand)Bechtel Engineering

Multi-discipline collaboration on the development of equipment general arrangements, P&ID’s, isometrics, asset and tie-in lists, orthographic, etc. · Attend client meetings and/or site field visits ·

Works under limited supervision. ·

Performs both routine and non-routine, complex design assignments that require judgment in resolving issues or making recommendations.

Maintain open communication with project team (including remote staff) regarding workload planning, task estimating and budgeting ·

Working with Project Engineers and Project Managers on developing workload forecasts, design schedules and budgets for electrical engineering work activities ·

Creating, updating, and implementing group specific standards

Prepare technical reports and presentations that explain research, findings, and recommendations.

Performing Pipe Stress analysis of Critical Piping Systems in accordance with ASME B31.3 Code requirements, using Caesar II software program, PDMS

Review and checking third party Stress calculations

Developed full pipe stress analysis, pipe support design and structural loads calculations.

Coordination with other disciplines, civil, mechanical and piping design.

Design and selection of pipe support and springs Supports

Nozzle Qualifications of drums, vessels and rotating equipment

Spring data sheet preparation, piping routing checking, piping design check. Perform piping engineer design work as required: Code calculations such as MAWP, pipe wall thickness, branch reinforcement, bend and miter fittings pressure capacity, hydrostatic test pressure Review offers from vendors; Vendor Technical Bid Evaluation and Support construction activities. Resolve site technical queries. Coordination with other disciplines. Meeting with Client/Vendors

TPX-REVAMP PROJECT- Thai Oil Refinery Plant-Detail Engineering

5/10/2004 – 2/28/2006

(1-yr-9mos)

Senior Piping Mechanical Project Engineer (Malaysia)MECIP Global Engineers

Excellent technical and practical engineering skills and ability to consistently deliver quality, accurate and timely work to company and its clients.

Excellent knowledge of the fundamental requirements of the piping engineering, and the basic requirements of other engineering fields.

Excellent knowledge of applicable local and international standards and statutory and regulatory specifications.

Competent use of relevant software such as MS Office Suite and piping engineering specific software.

Extensive technical and practical experience in piping engineering in the same or similar industry including experience in working in multi-disciplinary projects and team

Specific:

Seconded to Client office: Review and evaluate Design Consultant’s static equipment design, pipe stress analysis report, design calculations, materials selection equipment data sheets & isometric drawings; Management (LCAM) process throughout the entire life cycle of new assets. Calculation of minimum thickness and remaining life of static equiment. vessels. Calculation of corrosion rate per year and evaluate the remaining life of vessels per API 510.

Evaluation and re-rating of pressure vessels, resolve contractor questions and clarifications determine corrective actions and coordinate piping engineering with other engineering disciplines. Check and approve specifications and drawings for standard and special piping components and carry out expediting, progress control and quality inspections at manufacturer's workshops. Monitor General contractor progress of works ensuring construction works meet Clients Quality and Industry Practice. Review/Prepare equipment data sheet, specifications, review vendor designs/detail engineering of the equipment, interface control and timely management of all technical data. Performed in-house static equipment re-rating of pressure vessels as ASME Sec VIII Div 1. Participate in the Piping and Instrument Diagram (P&ID) HAZOP and Technical Reviews. Ensure that the contractors equipment design meets the approved project specifications, industry standards and functional requirements including compliance with Company Project Principles, Engineering Technical Practices and associated guidelines. Provide technical expertise on Mechanical (Static) Equipment and Advise on use of standards, practices and design guidelines. Review design deliverable and documents.

.

Kerteh Refinery Rejuvination PROJECT- PETRONAS-Detail Engineering

3/15/1996 – 12/28/2003

(5 yrs-9 mos)

Principal Piping Engineer (Malaysia)Ranhill Worley

Manage piping engineering services that meet Worley', its customers' and applicable statutory and regulatory specifications, on time and within budget.

Manage piping engineering project requirements.

Manage piping engineering services such as:

participate in relevant meetings, prepare progress reports and comply with required checking procedures; ensure the project scope is clear and that changes comply with project change management processes;

provide advice during procurement, construction and commissioning activities. For example, oversee requisitions, technical bid evaluations and purchase order preparation.

Act as the piping engineering Lead on specific projects.

If responsible for a team:

outline project requirements including actively promoting workshare, where appropriate, assign tasks and supervise progress; and

ensure the required services meet Worley, its customers and applicable statutory and regulatory requirements, on time and within budget.

Proactively resolve any discrepancies between Worley and its Customer's requirements.

Keep up-to-date with the latest developments and technical innovations in piping engineering.

If required, assist and support junior personnel within the piping engineering

Petronas Gas Processing Plant PROJECT- PETRONAS-Detail Engineering

Duyong/Angsi Top Side Tie -in PROJECT- PETRONAS-Detail Engineering

5/20/1994 – 1/10/1997

(2 yrs-8 mos)

Senior Piping Engineer (Saudi Arabia) Bugshun,Stone &Webster

Responsibilities included are Stress analysis, pipe support design, spring data sheet preparation, piping routing checking, piping design check. Review piping general arrangement/equipment layout, isometric drawings Provide load input to Civil/Structural. Work includes, among other things, conceptual studies, cost and planning studies, layouts, design calculations, specification development and supervising vendor packages for equipment, nozzle load allowable. Effectively communicate technical solutions and concepts to other engineers and non-engineers

Contribute to the design of engineering solutions and produce detailed designs and specifications. Prepare and checking of piping deliverables to meet specific project requirements including;

Preparation of the following drawings and Piping Route Maps.

Piping Wall Thickness Calculation Report. Piping Plans drawings.

Piping ISOs drawings. Facilities Plot Plans drawings. Typical Piping Drawings.

Piping design philosophy. Tie-In Index

Pipe supports calculation and Drawings

Computer simulation studies such as Piping Stress analysis

Code calculations such as MAWP, pipe wall thickness, branch reinforcement, bend and miter fittings pressure capacity, hydrostatic test pressure. Vendor data and drawing review and comments

Jubail Petrochemical Complex PROJECT- SABIC-KSA-Detail Engineering

Ras Tanura Refinery Upgrade PROJECT- SAUDI ARAMCO-Detail Engineering

3/15/1993 – 3/15/1994

(1 yr-0 mos)

Senior Mechanical Engineer (Philippines)Parsons International Ltd

Contribute to the design of engineering solutions and produce detailed designs and specifications. Prepare and checking of piping deliverables to meet specific project requirements including;

Preparation of the following drawings and Piping Route Maps.

Piping Wall Thickness Calculation Report. Piping Plans drawings.

Piping ISOs drawings. Facilities Plot Plans drawings. Typical Piping Drawings.

Piping design philosophy. Tie-In Index

Pipe supports calculation and Drawings

Computer simulation studies such as Piping Stress analysis

Code calculations such as MAWP, pipe wall thickness, branch reinforcement, bend and miter fittings pressure capacity, hydrostatic test pressure. Vendor data and drawing review and comments

Shell Refinery Upgrade Project- SHELL Philippines-Detail Engineering

4/15/1990 – 3/8/1993

(2yrs-10 mos)

Mechanical Engineer (Japan) Sumitomo Densetsu Co. Ltd

Generating isometric drawings, Plumbing, Fire protection lay-out HVAC duct Lay-out, pipe support design. Piping routing checking, Prepare fire protection piping general arrangement layout.. Prepare detailed design drawings, project specifications, cost estimates, construction schedules and other requirements needed in the proper implementation of the project.

Carry out preliminary field investigations and studies to determine the lay-out requirements associated with fire protection, heating, ventilation and air-conditioning (HVAC) and plumbing system of a particular project.MTO. Prepare pipe spool fabrication drawings. Drafting works of special pipe supports.

Project: High rise Building Fire protection, Plumbing and HVAC

7/20/1989 – 3/15/1990

(1 yr-0 mos)

Mechanical Engineer (Philippine) JGC

Prepare and checking of piping deliverables to meet specific project requirements including ;

Preparation of the following drawings and Piping Route Maps.

Piping Wall Thickness Calculation Report. Piping Plans drawings.

Piping ISOs drawings. Facilities Plot Plans drawings. Typical Piping Drawings.

Piping design philosophy. Tie-In Index

Pipe supports calculation and Drawings

Computer simulation studies such as Piping Stress analysis

Code calculations such as MAWP, pipe wall thickness, branch reinforcement, bend and miter fittings pressure capacity, hydrostatic test pressure. Vendor data and drawing review and comments.

Skikda Refinery Complex PROJECT- Iranian National Oil Company-Detail Engineering

7/20/1986 – 6/25/1989

(3yrs-10 mos)

Piping Project Engineer (Thailand) Mitsubishi

Ensures that tests and inspections are performed, witnessed, and documented in accordance with approved procedures. Maintains first-level quality assurance to confirm that the installation of all work within his/her discipline is in accordance with the plans, specifications, and industry standards Field Verify/check various pipe support location and standard selection as derived from Stress Analysis.Generating isometric drawings, pipe support design, Piping routing checking, Prepare MTO. Prepare pipe spool fabrication drawings. Work also include field investigation, punch-listing and quality control report and final evaluation of all utilities and off-sites facilities. Establishes and maintains liaison with the discipline design engineering staff. Reviews and interprets discipline design drawings and specifications to ensure current revision level and correct technical execution of the work. Provides resolution for technical engineering problems within the assigned discipline; coordinates application of solutions

Wang Noi Combined Cycle Power Plant - Electricity Generating Authority of Thailand

7/15/1980 – 5/15/1986

(5yrs-10 mos)

Piping Mechanical Project Engineer (Philippines) A G & P

Coordination and checking of engineering deliverables and prepare monthly project status reports. Supervision of. Closing-out of punch list prior to commissioning activities. Monitor labor costs, supplies and materials are received, used and charged appropriately.

Direct supervision of erection and construction work (pressure vessels, piping/pipe support. ducts). Oversee installation of HVAC/AHU at LQs Module. Construction activities to ensure compliance with construction schedules, drawings, job specifications and procedures. Carry out preliminary field investigations and studies to determine the requirements associated with HVAC and plumbing system of a particular project Field Verify/check various pipe support location and standard selection as derived from Stress Analysis. Generating as-built isometric drawings, pipe support design, Piping routing checking, Prepare MTO. Prepare pipe spool fabrication drawings. Works also includes field investigation, punch-listing and quality control report and final evaluation of all utilities and off-sites facilities.

Seligi A & D Compression and Dehydration Platforms - ExxonMobil

Bekok C & Tinggi A &B Compression and Dehydration Platform –ExxonMobil

7/10/1978 – 4/15/1980

(1yr-9 mos}

Mechanical Engineer (Philippines) Benguet Mining Corporation

Communicate with Company Organization for key reviews on HSE, in technological, in operation and project requirements related matters.

Assist construction and commissioning teams with field questions encountered during installation, construction and commissioning phases.

Participate in technical evaluation of suppliers and equipment purchases

Maintain up to date facilities mechanical/piping installation database.

Ability to direct the Piping designer in preparation of piping isometrics, piping bill of materials and piping layouts plus review of same..

Contact this candidate