Engineer Quality
Resume:
PLATERO, BIÑAN, LAGUNA
MOBILE NO. +63-049-*******/
FE BAÑADOS NEVADO
TECHNICAL SKILLS
Knowledge in MS Windows 2003 XP (MS Word, Excel, Power Point & etc.)
Knowledge in documentation of FMEA, 8D, Control Plan, PSW & 7 QC Tools.
Able to operate and validate/calibrate QA/QC equipment such as CMM (Coordinate Measuring Machine), Micrometer, Surftest Machine, Caliper, Profile Projector or QV, etc.
Able to make inspection program in CMM
Able to read technical drawing
WORK EXPERIENCE
NOV. 24, 2016 – FEB. 02, 2017 CALCOMP PRECISION INC.
Molded Plastic Precision Parts –
Manufacturing/Production
CMM Supervisor/Senior Engineer
The CMM Supervisor/Senior Engineer is responsible for the overall CMM Section including incoming, in-process & outgoing tests and inspection activities, maintenance and calibration of gauges, measuring and test equipments, providing ISIR package(Initial Samples Inspection Report).
Duties & Responsibilities:
Supervise QC inspection processes.
Conduct training for CMM Engineer/Technician.
Initiative & formulate corrective / preventive action with relevant departments and verify the effectiveness.
Evaluate and dispose in-process reject products.
Implement Statistical Process Control (SPC) system, monitor and improve the process capability with production department.
Assist QA Engineer in the qualification of new products (e.g. mold testing) and new process.
Review customer drawings / specifications, manufacturing instruction, test result and other associated production / development planning for determining and establishing required quality requirements and measurement system capability.
Plan and Review Measurement System Analysis (MSA) results.
Plan & Review Process Capability Study (CP/Cpk) results.
Plan & Review First Article (FA) Inspection results.
Establish Quality / Inspection Plan for assigned project / product.
Analyze and evaluate new project / product for necessary planning of process control, inspection and testing needs.
Interface with tool maker, supplier, customer and / or relevant departments in problem solving by effectively use of failure analysis, problem solving, mistake-proofing and statistical techniques.
Collect & analyze data pertaining to quality performance for prioritizing and initiating and action plans for continual improvement.
Execute the responsibility and authority of the QA Engineer during his absence.
FEBRUARY 01, 2015 – JANUARY 31, 2016 HIRATA PRECISION PHILS., INC.
Trading & Manufacturer
QA Supervisor – Quality Dept.
The QA Supervisor is responsible for the overall operation of the quality office including incoming purchase parts quality, product quality, quality system implementation, document control function, budget and cost management, people management, employee safety and environmental management.
This position is also responsible in managing customer concerns and issues on quality of products and make sure that these are responded to the soonest possible time.
Duties & Responsibilities:
Direct and supervise the overall activities of the quality department to ensure product quality.
Ensure that Policy Deployment Process is conducted at all levels in the department, including quality related policies and guidelines across all levels in the Plant.
Develop business plans, objectives and strategies of the department to ensure the achievement of objectives..
Take the lead in the implementation of an effective quality system through the quality system, process and product audits and management review of plant’s performance against objectives.
Act as the Customer Representative to ensure that customer requirements are addressed. This includes selection of special characteristics, setting quality objectives and related training, corrective and preventive actions, product design and development.
Responsible in promptly advising the General Manager with responsibility and authority for corrective action regarding products or processes which do not conform to the customer requirements.
Manage product quality through proper evaluation of component and product design specifications, providing support in cross functional teams to develop Failure Mode and Effect Analysis, control plans, and evaluation of product defects.
Develop and implement incoming, in-process and outgoing inspection processes to assure product quality.
Diagnose and investigate customer quality issues and implement corrective and preventive actions.
Direct maximum and proper use of resources including materials and manpower.
Plan and prepare annual budget.
Develop procedures for the incoming and outgoing inspection, train technicians on the process and proper use of equipment.
Motivate team towards achieving safe, healthy and hazard-free environment at the workplace.
Lead the team to accomplish targets through proper training, mentoring, coaching and counseling.
Other duties assigned by management.
JULY 16, 2000 – APRIL 30, 2012 VISTEON PHILIPPINES, INC.
Automotive Parts – Manufacturer
QC Lead Technician – QC Dept.
The Lead Quality Technician is responsible for all tests and inspection activities, maintenance and calibration of gauges, measuring and test equipments, maintains limit samples. This position also acts as the document controller for TS16949. Leads the team in the absence of the Quality Engineer.
Duties & Responsibilities:
Perform process validation testing on new products and process changes as requested by Manufacturing Department.
Maintain quality laboratory gauges, measuring and test equipment.
Support in providing work instructions for inspection/measurement processes.
Provide CMM programs for measurement requests by Quality Engineer and/or Manufacturing Department.
Maintain records of quality inspection / measurement processes.
Perform quality inspection (pre-delivery inspection & incoming inspection) as specified in the control plan and release inspection reports.
Perform and release inspection report on specific audit tests for assembly parts/products as specified in the control plan as requested by Manufacturing.
Maintain limit samples.
Perform GR&R tests as requested by Quality Engineer
Assist quality teams with the use of quality tools (SPC, 8D, etc.)
Provide suggestions for continuous improvement of quality inspection processes.
Maintain system level TS16949 Documents (manuals, procedures and other documents).
Coordinate with specific areas/function document controller regarding revision, identification, storage, indexing, filing and maintenance of documents and records.
Perform periodic document and records check/audit in each area to effectively implement document and data control.
Act as the team leader in the absence of the quality engineer. Other duties assigned by management.
NOV. 25, 1996 – JUL. 15, 2000 NIDEC PHILIPPINES CORP. SPM (Spindle Motor) – Manufacturer
Engineer III – Incoming QA Dept. Duties & Responsibilities:
Assist Supervisor in coordinating functions and activities of Incoming Inspection Department.
Prepares, implement and develop procedure in QA system based ISO requirements and generates Standard Operating Procedure for inspection and testing.
Coordinate parts inspection results to Production Control Division and non-conforming parts to the vendor.
Control, utilize, and maintain inspection equipments, jigs, and fixtures.
Review results on inspection performed by QA Inspectors and verify non-conforming parts.
Train and assist new inspectors.
Perform QA function assigned by QA Supervisor from time to time.
MARCH 1996 – JUNE 1996 MPM PUREFOODS
Inspector – Production Division
OCTOBER 1992 – MARCH 1993 MONDE DENMARK NISSIN
BISCUIT CORPORATION
Arranger/Inspector-Production Div.
TRAININGS AND SEMINARS ATTENDED
MERALCO FOUNDATION INST.
March 12 – 23, 2012 Building and Wiring Installation Course
By: Mr. Joseph Raymund Mabilog
March 26 to April 10, 2012 Industrial Electrician Course
By: Mr. Alex Mendoza and Mr. Paolo David
VISTEON PHILIPPINES, INC.
MAY 19 – 22, 2008 CMM - Coordinate Measuring Machine
(GEOWIN - Model Mitutoyo Beyond Apex 504 with MCOSMOS Software Version 2.0)
By: Archimedes E. Ison – MESCO
March 10, 2006 Basic Statistical Process Contorl & 7 QC Tools Training
By: Celestino J. Tolentino – VPI
February 2, 2006 Lean Manufacturing Overview Training
By: Celestino J. Tolentino – VPI
Feb. 22 – Mar. 09, 2001 SPC – Problem Solving Tools & Basic Statistical Techniques
By: Dra. Mae Gatchalian
TAGUIG METRO MANILA
Feb. 12 & 13, 2004 DM 3:ISO Limits & Fits Inspection of Geometrical Tolerances
By: Metals Industry Research & Dev. Center
May 17, 2002 DM I: Basic Measurement
By: Metals Industry Research & Dev. Center
November 16, 2001 Dimensional Metrology 1 (Basic Measurement)
By: Metals Industry Research & Dev. Center
NIDEC PHILIPPINES CORP.
October 15, 1997 Introduction to Dimensional Metrology & Basic Calibration
Validation of Length Measuring Instruments
October 8, 1997 ISO 9000 Awareness
SHIGA-KEN, JAPAN
Jan. 31 to Feb. 6, 1999 CMM Measurement -Correlation for Die
Casting Base Plate used TSK CMM
KYOTO, MINEYAMA, JAPAN
August 18- 23, 1998 CMM Programming for Mitutoyo CMM
SAN PABLO CITY OF LAGUNA
1993 HRTC (Hotel/Restaurant Training Course)
NMYC, TAGUIG, M.M.
1991 Bar and Restaurant Management
SAN PABLO CITY
CITATION
September 23, 1999 2nd Place in Nidec QCC
Quality Control Circle’s Theme: Reduce Inspection
Time for PB13 – HUBL to a Minimum of 2 hrs. per Lot
August 1, 2008 Grand Winner Award for QCRC Competition
(Quality Circle Regional Competition)
Support Categories-Quality Group
Alabang Muntinlupa City
EDUCATIONAL BACKGROUND
VOCATIONAL ELECTRONICS TECHNOLOGY 1995 – 1997
Jacobo Z. Gonzales Memorial School of
Arts and Trade
San Antonio, Biñan, Laguna
COLLEGE ASSOCIATE IN TOURISM 1990 – 1992
Saint Michael’s College of Laguna
Biñan, Laguna
HIGH SCHOOL STA. ROSA EDUCATIONAL INSTITUTION 1985 – 1989
Sta. Rosa, Laguna
ELEMENTARY PLATERO ELEMENTARY SCHOOL 1979 – 1985
Platero, Biñan, Laguna
PERSONAL DATA
DATE OF BIRTH : December 4, 1971
CIVIL STATUS : Married
NATIONALITY : Filipino
RELIGION : Roman Catholic
HEIGHT : 5’ 6”
WEIGHT : 127lbs.
PASSPORT NO. : EB5645473
REFERENCES To be furnished upon request.
Contact this candidate