Mechanical Foreman
Resume:
KENNETH JAMES A. ABADIES
Mechanical Foreman
Bachelor of Science in Marine Transportation
Mobile Nos.: +639*********
Email Add: *************@*****.***
Skype Id: net.ski07
Current Location: Philippines
Availability: I can start for work as soon as possible
OBJECTIVES: TO SECURE A POSITION THAT COMMENSURATE MY QUALIFICATION
WORK EXPERIENCES & QUALIFICATIONS:
Position: Mechanical Foreman
Duration: September 15, 2015 to Present
Company: NATIONAL PETROLIUM CONSTRUCTION COMPANY
Company Industry: Oil / Gas / Petroleum(ONSHORE & OFFSHORE)
Location: Mussafah, Abu Dhabi, United Arab Emirates
Department: Mechanical Asset Integrity Department
Job Description: Provides general guidance and work direction for assigned crew members.
Performs maintenance and alignment of Offshore facilities.
Performs maintenances on drill units, hydraulic pumps such as high and low pressure Halliburton water pumps, grout feeder pumps, peerless pumps and firefighting pumps.
Performs maintenance such as change oil, change belts on heavy engines.
Replaced damage mechanical seals, packing glands and bearings.
Changing lube oil for pumps and compressors.
Performed air venting on hydraulic lines and pumps.
Arrest oil leaks on pressurized hydraulic lines and fittings.
Replaced damage part of mechanical equipments.
Insured all the mechanical facilities and equipments are working well.
Performed commissioning and testing of equipment and facilities.
Insure good and quality performance of equipments and performed preventive measures on marine pollutant.
Position: Mechanical Foreman
Duration: July 6, 2014 to October 1, 2014
Company: GS ENGINEERING & CONSTRUCTION
Company Industry: Oil / Gas / Petroleum (OFFSHORE JETTY)
Location: Ruwais, Abu Dhabi, United Arab Emirates
Department: Mechanical Commissioning
Job Description: Provides general guidance and work direction for assigned crew members.
Person in-charge for final alignment and parallelism for absorbent centrifugal pumps, seal fluid pumps, inlet blowers, vacuum booster blowers, vacuum compressors, naptha/jet fuel gas oil slop transfer pumps, gasoline/alkalyte transfer pumps, bunker fuel oil transfer pumps and vertical pumps.
Resolved soft foot issues of all motors.
Replaced damage mechanical seal and bearings.
Changing lube oil for pumps and compressors.
Replaced gaskets and “O” rings on flanges of fuel loading arms.
Performed air venting on hydraulic cylinders.
Arrest oil leaks on pressurized hydraulic lines and fittings.
Replaced couplers of fuel loading arms.
Assisted the vendors (EMCO WHEATON) for test and simultaneous run of all mechanical facilities.
Insured and tested the Emergency Release System (ERS) coupler is working properly and prevent it to any damage.
Insured all the mechanical facilities and equipments are working well while commissioning is on progress.
Performed preventive measures on marine pollutant.
Position: Millwright/ Mechanical Technician
Duration: December 3, 2011 to September 7, 2013
Company: Doosan Heavy Industries
Company Industry: Mining
Location: Vavouto, New Caledonia
Department: Mechanical
Job Description: Appointed as chargehand of the group.
Can read and understand blueprints and drawings.
Performs rotating and static alignment.
Performs layout, chipping, and padding of concrete foundations.
Assemble, install and centering of mechanical equipment and its accessories.
Performs preliminary and final alignment of 1200Hp motors of Induce Drafts Fan, Primary Air Fan and Secondary Air Fan for Refinery and Power stations.
Performs Confined Space activities of Vessels, Tanks, Capsule, Chimneys, Sumps, etc.
Performs Alignments of all motors and pumps.
Person-In-charge of erection, assemble and installation of a 155/35 ton overhead refinery aisle crane (KONECRANES) and its accessories including internal electrical system.
Performs installation, preliminary and final alignment of Steam Turbine Generator.
Fabricate and assemble Boilers and pre-heater duct.
Performs pre-ops activities.
Received Certificate of Appreciations from PROJECT KONIAMBO Management and KONECRANES AMERICAS.
Position: Millwright/ Mechanical Technician
Duration: Oct 21, 2010 - May 3, 2011
Company: Kentz Engineers and Constructors
Company Industry: Mining
Location: Madagascar, South Africa
Department: Mechanical
Job Description: Performs skilled mechanical work of all types in shop or field.
Locates equipment faults and operating irregularities by making the necessarydiagnostically tests, measurements and analyses.
Determines nature of repairs to be made and replacement parts required.
Performs necessary maintenance on assigned equipment, stripping down, replacing, or fabricating parts as required.
Reassembles Equipment, runs operating tests to ensure satisfactory repair.
Prepares new or altered installation on all types of mechanical equipment including foundation work, line-up, gear box, coupling and speed control settings, then test run for acceptance.
Sets, adjusts and performs maintenance on machine tool equipment and balancing machines.
Troubleshoots and repairs all kinds of hydraulic, relief valves, motors, shipper pumps, auxiliary pumps (lube oil and fuel), reciprocating compressors, Installation and removal of combustible turbine and gas turbines.
Provides general guidance and work direction for assigned crew members.
Position: Post Weld Heat Treatment Technician
Duration: Jun 1, 2008 - Apr 29, 2009
Company: Consolidated Contractors Company
Company Industry: Oil / Gas / Petroleum
Location: Jubail, Kingdom Of Saudi Arabia
Department: Non-Destructive
Job Description: Performed pipe stress relieving in all alloy joints in a gas plant.
Position: Mechanical Fitter
Duration: Jan 16, 2006 - Feb 18, 2008
Company: China Railways 18th Bureau Group Co. LTD.
Company Industry: Oil / Gas / Petroleum
Location: Jubail, Kingdom Of Saudi Arabia
Department: Mechanical
Job Description: Performed Layouts, Centering, and Elevation checking by the use of Dumpy Level.
Performed chipping, padding, centering of equipment.
Performed preliminary alignment and final alignment of pump and motors.
Performed pre-ops and commissioning activities.
Position: Mechanical Fitter
Duration: Aug 18, 2002 - Oct 20, 2005
Company: Mabuhay Vinyl Corporation
Company Industry: Chemical / Biochemical
Location: Iligan City, Philippines
Department: Mechanical
Job Description: Alignment of motors and all machineries use for suction and discharged of chemical...
LICENSE and CERTIFICATION:
License/
Certification
License/
Certification No.
Date Acquired Validity
Professional
Driver’s
Licence(Phil.)
Plumbing National Certificate Level II
M02-05-002559
June 30, 2005 Nov. 7, 2019
Nov 25, 2009
Radiographic Testing Level II
IITNDT/RT/II/08/SA/008
Sep 20, 2008
TRAININGS/SEMINARS:
Date
Topic/Course Title
Oct 12,2015- Oct 14, 2015
Oct 7,2015- Oct 8, 2015
Dec 3, 2013- Dec 10, 2013
Oct 28, 2009- Nov 23, 2009
TROPICAL – BASIC OFFSHORE SAFETY INDUCTION & EMERGENCY TRAINING
Gulf Technical & Safety Training Centre
(Credited by OPITO)
Abu Dhabi, UAE
BASIC OPITO H2S TRAINING
Gulf Technical & Safety Training Centre
(Credited by OPITO)
Abu Dhabi, UAE
PC OPERATIONS NC-II
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY (TESDA)
TESDA - Salvador Trade School, Salvador, Lanao Del Norte
PLUMBING NC-II
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY (TESDA)
TESDA - Salvador Trade School, Salvador, Lanao Del Norte
Jun 5, 2009- Oct 22, 2009
SEASON LONG FARMERS' FIELD SCHOOL PALAY CHECK SYSTEM ON RICE PRODUCTION
Department of Agriculture
Lala, Lanao del Norte
July 3, 2008- July 18, 2008
RADIOGRAPHIC SAFETY
BECHTEL-TECHNIP Joint Venture
Saudi ARAMCO - Kingdom of Saudi Arabia
Feb 17, 2008- Feb 24, 2008
THE JUBAIL SAFETY LEADERSHIP WORKSHOP
BECHTEL - Saudi Arabia
Jubail Industrial City, Kingdom of Saudi Arabia
Aug 4, 2007- Aug 25, 2007
SHIELDED METAL ARC WELDING (SMAW) NC-I
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY (TESDA)
TESDA - Salvador Trade School, Salvador, Lanao del Norte
Mar 5 - Mar 16, 2007
Driver's Education
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY (TESDA)
TESDA - Salvador Trade School, Salvador, Lanao del Norte
PERSONAL INFORMATION:
NAME : Kenneth James Aguinaldo Abadies
ADDRESS : Fernan Sub., Maranding, Lala, Lanao del Norte
CONTACT # : 099********
CIVIL STATUS : Married
CITIZENSHIP : Filipino
PASSPORT # : EB6878562
(Date issue) : December 04, 2012
(Valid until) : December 03, 2017
EDUCATION:
Highest Education
Education Level:
Bachelor's / College Degree
Education Field:
Merchant Marine
Course:
Bachelor of Sciencein
Marine Transportation
School/University:
MISAMIS INSTITUTE OF TECHNOLOGY
Location:
OZAMIZ CITY, MISAMIS OCCIDENTAL
Second Highest Education
Education Field:Vocational Diploma / Short Course Certificate
Education/Teaching/Training
Courses: PC OPERATION, DRIVING, WELDING, PLUMBING
School: TESDA - SALVADOR TRADE SCHOOL
Location:SALVADOR, LANAO DEL NORTE
High School
Education Field: Secondary
School: CHRIST THE KING HIGH SCHOOL
Location: MARANDING, LALA, LANAO DEL NORTE
Elementary
Education Field: Elementary
School: MARANDING CENTRAL ELEMENTARY SCHOOL
Location: MARANDING, LALA, LANAO DEL NORTE
REFERENCES:
Mr. Serge Bilodeau
Construction Manager
Konecranes Americas
Mr. Song Ki Min
Project Manager
Sejong Corporation(Doosan Heavy Industries)
Mr. Liam Murphy
Mechanical Superintendent
Kentz Engineers and Constructors
Eng’r. Ross Marangga Jr.
Mechanical Construction Manager
China Railways 18th Bureau Group Co. Ltd
Contact this candidate