GAURAB DAS

Address for Correspondence:

C/o-Saurav Das, D-9, Second Floor, Nand Society, Behind AIMS Oxygen, O.P.Road, Vadodara, Gujarat-390020 Phone : +91-889*******, +91-943*******, +91-971******* Email : acztmx@r.postjobfree.com

Seeking assignments in Installation/Testing/Commissioning/Designing/Project Execution/Operation & Maintenance with an organization, where I will be able to enhance and utilize my management and research skills, to not only allow me to grow personally and professionally, but to firmly contribute towards the achievement of the mission and values of organization.

• Bachelor of Technology (Electrical & Electronics) Engineer with 8 years of experience in:

-Installation/Construction - Project Execution - Liaison & co-ordination

-Testing & Commissioning - Team Management - Operation & Maintenance

• Gained experience in pre-commissioning, Commissioning, designing, testing, maintenance, Sub-Station equipment management.

• Proficiency in managing operation and maintenance of various equipment for reducing downtime enhancing operational effectiveness of equipment.

• Adept in managing testing & Commissioning activities involving resource planning, in-process inspection, Team building and co-ordination with internal/external departments.

• Adroit in planning and effecting predictive & preventive maintenance schedules for various equipment to increase machine uptime and equipment reliability.

• An effective communicator with excellent leadership and problem solving skills.

• Anchoring on-site testing & commissioning activities to ensure completion of project within the time & cost parameters and effective resource utilization to maximize the output.

• Carrying out commissioning of equipment, modifications and major repairs to improve efficiency by faultfinding.

• Finalizing requirements and specifications in consultation with architects/engineering/construction.

• Reviewing shop drawing and schedule & ensure that all activities are carried out as per the requirements of the construction specifications and quality plan.

Conversant with:

• Technical submission.

• Preparation of Commissioning and Pre-commissioning dossiers, procedures and method of statements.

• Installation, Testing and Commissioning of Transformer HV/MV/LV Switchgears/Protections,UPS,LDB, PDB, VFD, DG Sets, and 33KV, 11KV, 6.6KV, 3.3KV, 0.415KV Switchgears & Motors.

• Preventive/Breakdown Maintenance, servicing and major overhauls of SF6 CBs,11KV VCBs, 3.3KV VCBs, 415V ACBs and 33KV, 11KV, 3.3KV, 0.415 KV AIS Switchgears. JOB OBJECTIVE

PROFILE SUMMARY

CORE COMPETENCIES

TECHNICAL SKILLS

• Erection, Testing and Commissioning of electrical equipment and instruments in the Power Generation plants, Substations, Process Plant & Stacker Reclaimers, Ship Unloaders for Sulphur handling terminal.

• Experience in the commissioning & operations,maintenence of :- GTG’s, HRSG’s, STG’s in Simple & combined cycle power plants includes; o Air cooled & water cooled condensers

o BFP, CEP Systems with its associated auxiliaries. o Closed cooling loop system.

o Water treatment plant/Sewage treatment plant

o Lube oil systems, Seal oil system & Generator Hydrogen Colling system o Gen. Excitation systems

o Generator neutral grounding equipment & Gen. Line terminals with CTs & PTs. o MV & LV switchgears with protective relaying, metering & control system o Lighting protection system.

• Strategizing and initiating plan for of all the scheme checking, troubleshooting & modification for the Power, control, and protection circuits.

• MS Windows, MS Office, AutoCAD, C, C++, HTML, XML, Adobe Photoshop.

• Skilled in computer hardware and assembly of computer.

• Installation of Operating Systems (Windows 8/7/VISTA/XP), Application Software, Troubleshooting etc.

• Preventive/Breakdown Maintenance, servicing and major overhauls of electrical equipment’s

(Transformer, HV/MV/LV Switchgears, 33KV, 11KV, 6.6KV, 3.3KV, 0.415KV Switchgears & Motors), UPS, DG Sets,VFD,LDB,PDB & Instruments,sensors,transmitters i.e;Proxy,level,pressure,flow meter, Control valves, MOV etc.

• Design and drawing coordination.

• Testing Instruments:

o High Voltage IR Tester (5KV Megger)

o Omicron Secondary Injection Kit Omicron CMC256 and CMC356 o Omicron CPC100

o CT Analyzer Omicron

o AC High Voltage Test Kit 120KV Megger

o DC High Voltage Test Set 160KV Megger

o Megger Secondary Injection Test KIT

o Megger Primary Injection Test KIT

November’14 to till date: - GS Engineering and Construction, Seoul, South Korea As a Lead Commissioning & Operation Engineer

Highlights:

• Involved in the Installation, testing and commissioning activities for: 2175 MW PP12 PP12, Saudi Electricity Company, Combined cycle power plant (RIYADH, SAUDI ARABIA)

(2015-2017)

• Involved in the Installation, testing and commissioning activities for: 110 MW CIPREL, Combined cycle power plant (ABIDJAN, COTE D’IVOIRE, AFRICA)

(2014-2015)

April’13 to Mar’14: Techint Engineering and Construction, Milan, Italy As an Electrical Spv Commissioning.

Highlights:

• Successfully commissioned substations i.e; 4 NOS for energizing the Stacker reclaimers and ship unloaders and other equipment’s for the Ruwais Sulphur Handling Terminal-2, GASCO,ADNOC,Abu Dhabi, U.A.E. under very tight schedule.

ORGANISATIONAL EXPERIENCE

December’08 to March’13: RKS EC (SIEMENS LTD), INDIA As an Erection and Commissioning Engineer.

Highlights:

• Successfully completed the construction/erection, testing and commissioning for: o 1X100 MW,Hirakud Power plant, Hindalco

o 2X35 MW Power Plant, Vandana Energy and Steels

o 4X25 MW Power Plant, Prakash Industries Ltd,

o 2X27 MWPower Plant, OCL India Ltd

• Adept in preparation of pre-commissioning, commissioning dossiers, procedures, method of statement, Design review and risk analysis report.

• Tested and commissioned substations of 33 KV switchboards,11 KV switchboards,6.6 KV and 3.3 KV switchboards

• Power plants up to 100 MW single cycle and 110 MW combined cycle power plant.

• Planned and executed testing & commissioning of combined cycle power plant of 115 MW, Single cycle power plant up to 100 MW,Transformers,DG Sets, Motors 6.6 KV,3.3 KV,AIS 11KV, PCC/MCC, SF6CB, VCB 11KV, UPS, VFD.

• Performed testing of transformer protection, generator protection, motor protection,Line differential, Bus bar differential, switchgear protection, synchronization etc.

• Exposed to AREVA, ABB, Siemens, Schneider, Alstom make HV/MV/LV SWGR, CT, PT, VCB, ACB, SF6CB, Protective Relays, Scheme test.

• Tested protective relays Sepam/Merlin Gerin, Siprotic/Siemens, ABB, Alstom etc.

• Well versed with protection, Inter trip and Inter lock schemes between up and down stream and over various power distribution network.

• Conversant with DCS, PLC, SCADA etc.

• Tested and Commissioned PLC controlled pump house.

• Exposed to fire alarm system.

• Experience in instruments like proximity switches, temperature sensors(RTDs,Thermocouple),flow meters, level transmitters, pressure transmitters,MOV,Pneumatic valves, ON/OFF Valves.

• Exposed to operation and maintenance of Cathodic protection transformer on jetties. Company: GS Engineering & Construction Seoul, South Korea Designation: Lead Commissioning and operation Engineer (Electrical) Duration: Nov 2014 – Till date

Project: SAUDI ELECTRICITY COMPANY, PARSONS BRINCKERHOFF, Riyadh, Saudi Arabia (2015-2017) Project: CIPREL, TRACTEBEL ENGINEERING GDF SVEZ, Abidjan, Cote d’Ivoire, Africa (2014-2015) Profile:

Project Planning (Site) & Management:

• Reviewing various drawing and schedule & ensuring that all activities are carried out as per the requirements of the construction specifications and quality plan and scheduling and preparation of commissioning activities in conjunction with all the Installation, pre-commissioning work completion.

• Follow up of construction and commissioning on MV switchboard, low voltage switchboard, static inverter, charger, Battery, MCC (ACC, HRSG, STG, Essential switchboard), lighting distribution board, HVAC switchboard. KEY RESULT AREAS

WORK EXPERIENCES/RESPONSIBILITIES

• Scheduling and follow up of testing and commissioning activities for power trnsformers,auxillary transformer,GCB panel, Generator protection panel which includes generator protection relay,transformer protection relay(GE MULTILIN),Turbine(GE),Alternator(Alstom)

• Prepared project progress report with different vendors and contractor in accordance to meet the targets/deadlines for the project.

• Maintaining of all field change/scope change for incorporation in As-built drawings, providing Engineering supports.

• Strategizing and initiating plan for the completion of various commissioning activities as per the commissioning check lists.

Project Execution:

• Anchoring on-site Installation & commissioning activities to ensure completion of project within the time & cost parameters and effective resource utilization to maximize the output includes supervise the interconnection cable routing, loop checking and termination for the MV switchboards, LV switchboards, MCC for ACC, HRSG, STG,HVAC and ESSENTIAL switchboards.

• Schematic checking for the MV switchboards, LV switchboards, MCC for ACC, HRSG, STG, HVAC and ESSENTIAL switchboards.

• Schematic checking for Generator protection panels, Generator circuit breaker, Automatic voltage regulator, RTCC panels and incorporated the changes in As-built drawings, providing Engineering supports.

• Strategizing and initiating plan for various troubleshooting for the system which includes electrical, control, & protection circuits etc.

• Handled SCHNEIDER Relays (Micom) and GE MULTILIN (Generator & transformer protection Relay)

• Scheduled and supervise the various activities of the vendors in accordance with the design specification which Includes:

Tested & commissioned the MV and LV panels that included: o Testing of CT’s and PT’s

o Insulation testing of panels/bus bars.

o Testing of vacuum circuit breakers and ACB s

o ATS test

o Testing of control circuits

o Testing of protection relays

o Making and breaking time of breakers

Performed testing and commissioning of following:

o AC UPS Gutor make

o DC UPS Gutor make

Performed following testing of Transformers:

o Insulation Resistance testing, turn ratio, winding resistance, Magnetizing current, etc. o Testing of OLTC(on load tap changer)

o Filtration of Transformer oil.

o Torque tightening of terminations

o High potential testing of HV insulators and cables. o Protection on transformer-Stability test, Differential, Earth fault, Restricted Earth fault, Instant and normal over current, directional over current, over/under voltage, grading protection of up/down stream, Reverse power protection, Bucholz,Oil temperature, winding temperature, PRD etc. Over/under frequency protection, DF/DT frequency protection Performed the commissioning activities of HPU (Hydraulic power unit) for Diverter damper MCC for ACC, HRSG, ESSENTIAL, HVAC, WTP, Electrical sys. o Schematic checking for the panels as per the design specifications for power and control circuits. o Interconnection cable checking for the panels, Testing of protection relays, Company: TECHINT ENGINEERING & CONSTRUCTION, MILAN, ITALY Designation: Electrical SPV Commissioning

Duration: April 2013 – March 2014

Project: Ruwais Sulphur Handling Terminal-2, Gasco, Abu Dhabi, U.A.E Profile:

Project Planning (Site):

• Scheduling and preparation of commissioning activities in conjunction with all the Installation, Pre-commissioning work completion.

• Reviewing various drawing and schedule & ensuring that all activities are carried out as per the requirements of the construction specifications and quality plan.

• Prepared project planning, resource planning and project progress reports with different vendors and contractor in accordance to meet the targets/deadlines for the project.

• Attending daily progress meetings with the client to discuss the status of the project and future plans.

• To plan materials in time at work for various activities to complete in its schedule time.

• Integrations of commissioning programme in conjunction with different construction completion.

• Planning about completion of project with Quality & Safety.

• Responsible for clearing the punch listing of various systems before hand over from Construction for the testing and commissioning activities.

Site Management:

• Involves in liaising between the client and the sub-contractors to determine the work scope and resolve any conflicts of interest that may arise on different work fronts.

• Prepared commissioning and pre-commissioning dossiers.

• Preparation of Testing and commissioning procedures includes switching schedule, method of statement and test formats.

• Interaction with client for the approval of Testing and commissioning procedures, inspection & test formats.

• Preparation of risk analysis report for all the Testing and commissioning activities.

• Implementing Permit to work system, Health, safety & environment management systems and policies.

• Institute the lock out and tag out procedures being in performing authority.

• Supervising the quality control inspection as per the protocol.

• Performing walk down with Client for following the punch list clearance for Systems & taking responsibilities to carry commissioning activities.

• Quick adaptability to meet new requirements successfully with systematic and organized approach for increased efficiency and competence.

• Strategizing and initiating plan for various troubleshooting for the system which includes electrical, control, & protection circuits etc.

Project Execution:

• Attending the project review meetings with client.

• Anchoring on-site testing & commissioning activities to ensure completion of project within the time & cost parameters and effective resource utilization to maximize the output.

• Maintain accurate records of work progress through inspection and test records and the submission of daily reports, adhere to all company specifications and standards.

• Designated as Senior Authorized Electrical Person for the project on all electrical commissioning and energisation activities.

• Handled SCHNEIDER Relays (MICOM P642, MICOM P543, MICOM P143,MICOM P141, MICOM P243, Siemens Relays (SIPROTEC 7SD61; Line Differential Relay),GE MULTILIN (Motor protection Relay).

• Performed testing and commissioning of following: o AC UPS Gutor make

o DC UPS Gutor make & VFD Schneider make.

• Tested & commissioned the HV/MV/LV panels that included: o Testing of protection relays

o Testing of control circuits

o Insulation testing of panels/bus bars

o Testing of vacuum circuit breakers

o Making/breaking time of VCBs

o Testing of CT’s and PT’s

o Hipot Test

o Internal arc test, mechanical key interlock test between the systems, synchronization test. o ATS Test

o Simulation test of remote protection of panels/transformers/generators

• Performed following testing of Transformers:

o Insulation Resistance testing, turn ratio, winding resistance, Magnetizing current, etc o Testing of OLTC (on load tap changer) and Torque tightening of terminations. o High potential testing of HV insulators and cables. Filtration of Transformer oil. o Protection on transformer-Stability test, Differential, Earth fault, Restricted Earth fault, Instant and normal over current, directional over current, over/under voltage, grading protection of up/down stream, Reverse power protection, Bucholz,Oil temperature, winding temperature, PRD etc.

• Major lighting systems handled:

o MLDB,SLDB,PDB-Lighting towers

• Tested and commissioned following PLC based systems: o Fire water pump stations comprising electric motor up to 3.3KV and diesel pump sets o Tested various instruments i.e; level transmitter, pressure transmitter, flow meters etc. o Tested and commissioned MOV

o Tested and commissioned control valves.

o Loop test,etc.

• Carried out motor testing:

o IR testing, winding resistance & inductance testing o Direction of rotation, NO load & load testing.

• Carried out relay testing & setting:

o Handled the configuration of final PSL setting.

o Handled the relay testing, configuration and modifications. Company: RKS EC (SIEMENS LTD), INDIA

Designation: Erection and Commissioning Engineer

Duration: December 2008 – March 2013

Project:

1X100 MW Power Plant, Hirakud Power plant, Hindalco 2X35 MW Power Plant, Vandana Energy and Steels,

4X25 MW Power Plant, Prakash Industries Ltd

2X27 MW Power Plant, OCL India Ltd

Project Planning (Site):

• Scheduling the erection, testing and commissioning activities of the project.

• Review and approved monthly valuation reports of sub- contractors.

• Coordinating with head office for timely delivery of all materials and project drawings on time to ensure uninterrupted work.

• Responsible for the interface with engineering, planning and procurement as well as other disciplines.

• Co-ordination with clients /consultants/third party inspection for design/drawing/QAP approval and inspection of materials required for the progress of the project.

• Monitoring, review, inspection and report all major activities and progress of the construction works to the head office and client.

• Coordinating with clients/consultants and other agencies working at site to discuss the course of action for the Completion of the scheduled job in time and to achieve different milestones.

• Ensure that execution plan and performance meets the project schedules, budgets, quality and HSE standard. Site Management:

• Responsible for the Construction, Pre-Commissioning, and commissioning activities includes: Site mobilization, material handling and preparation of NCR for materials & equipment’s at site,

• Inspection of materials as per project specifications & coordination with procurement and factory for timely delivery of materials on site. Allocating the job to the contractor and monitoring the quality of jobs.

• Preparation of job progress report & safety issue on site.

• Preparation of risk analysis report for all the Testing and commissioning activities.

• Implementing Permit to work system, HSE systems and policies.

• Develop Commissioning Procedures, Work Orders, Plans, and Handover documentation for early and efficient client acceptance

• Maintaining of all field change/scope change for incorporation in As-built drawings.

• Provide Engineering supports and co-ordination with project team.

• Clearing punch list items in coordination of construction group, making system ready for Energisation. Project Execution:

• Responsible for the execution of projects from construction to completion within project targets. Interface with Engineering/design team.

• Attending the project review meeting with client at site to discuss about the status of the project.

• Conducting the project review meeting with sub-contractor at site.

• Co-ordaining with client for providing Inspection waiver certificate, dispatch clearance, way bill for Supplying of materials.

• Preparation and co-ordination of daily work scope for systems completion, rectify project engineering queries and solve technical problems associated with construction or commissioning activities.

• Identify and eliminate problems that may impact project milestones.

• Handled the relays testing of Siemens, Alstom, and ABB (REM545: Generator Protection Relays, Rotor Earth Fault Relay.

• Carried out Installation, testing & commissioning of Alternator, PMG, and Exciter.

• Responsible for the scheme checking of different panels which includes, TSP, RMP, Synchronizing, AVR.DC Stator Panel (EOP & JOP).Barring Gear Panel,NGR,LAVT.

• Responsible for the erection, testing & commissioning of NGR, LAVT, TSP, RMP, Synchronizing, AVR, DC Stator panels.

• Responsible person for different activities of the equipment’s which includes; o IR test of all electrical system

o Simulation test for protection system

o Erection & Testing of CT’s and PT’s

o Erection, Testing of Bus bars.

o High potential Test of cables

o Testing and commissioning of motors.

• Tested & commissioned the generator that included: o Lamp Load Test,

o Differential stability test of generator

o Dummy Synchronizing,

o OCC & SCC test of generator

o Back charging before the system start up.

• Carried out motor testing:

o IR testing, winding resistance & inductance testing o Directions of rotation, NO load, load testing.

• Performed following testing of Transformers:

o Insulation Resistance testing, turn ratio, winding resistance, etc.& testing of OLTC(on load tap changer) o Protection on transformer-Stability test, Differential, Earth fault, Restricted Earth fault, Instant and normal over current, directional over current, over/under voltage, grading protection of up/down stream, Reverse power protection, Bucholz,Oil temperature, winding temperature, PRD etc.

• Tested & commissioned the HV/MV/LV panels that included: o Testing of protection relays and testing of control circuits,Insulation testing of panels/bus bars & Hipot o Test, Testing of making & breaking time test of circuit breakers, o Testing of CT’s and PT’s.

• Handled the Erection planning of :

o JBs, LPBS, process lines/tubing for field instruments, o Cable laying and Cable tray routing of Instrumentation cables, Power & Control cables o Monitoring of JB glanding, cable termination; loop checking of field instruments and range adjustment.

• Carried out Instrumentation calibration for :

o Pressure Gauges, Temperature Gauges, Thermocouples, RTDs, Level transmitter, Pressure transmitter, flow transmitter pressure switch & Level switch. Calibration of control valves,MOV

• Panel charging of TSP – Programming of Woodward Governor, OSPS (Guardian) & configuration of VMS

(BentlyNevada & Provitech).

• Responsible person for:

o Speed Probe & Axial Rotor Position Probe Adjustment, Vibration probe measurement fixing & activation. Administer calibration of CPC & Servomotor, fixing Bearing RTDS & Loop test.

• Tested and commissioned following PLC/DCS based systems: o Tested various instruments i.e.; level transmitter, pressure transmitter, flow meters, pressure switches, level Switches

o Tested and commissioned MOV and control valves, Loop test from field to JB and from JB to DCS/PLC.

• Company: Smart Brains Engineers & Technologist Pvt. Ltd

• Project Title: Electrical Design with ETAP

• Description: Undergone successful training program in “Electrical Design with ETAP” with extended training on AUTOCAD relevant codes & standards, load calculations, selection & sizing of equipment’s, substation Design, Hazardous Area Classification. Earth & lighting design, cable layout preparation.

• Operating Systems : Windows (98/2000/XP/7/8)

• Software Skill : MS Office (Word, Excel, PowerPoint), AutoCAD,SCADA Programmable logic controller, Distributed control system. TRAININGS & PROJECTS UNDERTAKEN

COMPUTER AWARENESS

ACADEMIC BACKGROUND

Languages Known

Read

(Beginner/Proficient/Expert)

Write

(Beginner/Proficient/Expert)

Speak

(Beginner/Proficient/Expert)

English Expert Expert Expert

Hindi Expert Expert Expert

Oriya Expert Expert Expert

Mobility : Willing to relocate anywhere in NW America, South America, Europe, Middle East, South Asia, Australia I declare that the details above are correct and true to the best of my knowledge. Full Name:

Gaurab Das

Year(s)

Qualification – Degree /

Diploma / Certificate

Board/University College / Institute

Percentage /

CGPA

2008

B.Tech

( Electrical & Electronics)

Biju Pattnaik University

of Technology, Orissa

Roland Institute of

Technology,

Berhampur, Orissa

62%

2004 XII CBSE,New Delhi

ChinmayaVidyalaya

Rayagada,Orissa

76%

2002 X CBSE,New Delhi

ChinmayaVidyalaya

Rayagada,Orissa

65%

Contact this candidate