Test Engineering

Robert B Marley

Home #: (***) *** - **** © 727-***-**** ************@*****.***

Objective

As an established Senior Electronics Technician with an established proven experience providing high level product support across a variety of industries and technical manufacturing environments. Drive efficiency by streamlining continuous and processes improvements and procedures, as well as by training and coaching employees on industry best practices and tools in a customer – focused team based environment with engineering.

Education

BACHELOR OF SCIENCE IN-PROCESS ST. PETE COLLEGE 3.00

Major: International Business Management

Minor: Electronic Engineering

Related coursework: Six Sigma; Lean Manufacturing; PHI 1600, ENC1101 & 1102, CGS1100, OST 1793, Hum2210 & 2270, MAC1105, POS2041

ASSOCIATE OF SCIENCE 1989 TAMPA COLLEGE 3.97 GPA

Major: Computer Information Science

Related coursework: CCD 1211; ET1 1001; ETI 1143; ETI 1144; CTE1121; CTE 1131;CTE2141; CTE 2151; CTE 2139; CTE 2149; CTE 2159; CET 1600; CET 1610; CET 2615; CNT 1000; ENC1101, SPC1015

DIPLOMA 1984 PINELLAS TECHNICAL EDUCATION CENTER GPA 3.20

Major: Electronic Engineering Technology

Minor: Drafting

Related coursework: EEV 01000; EEC0100; EEV0500; EEV0616; AR101

Skills & Abilities

MANAGEMENT

Sales Supervisor at Best Buy; Manager Trainee at Radio Shack; Managing Partner Sparkling Cleaning

Service of Tampa Bay LLC

COMMUNICATION

Alert Test Engineers of test issues on DUT also working with them to resolve various DUT test issues at the weekly meetings along with the presentation on power point.

Instruction on employees on workstation setup for prevention of eyestrain, repetitive strain injuries, and back pain. Instructing our staff on Project Augmentation using 1099 Contractor sign up.

LEADERSHIP

Countryside Youth Soccer Coach, Volunteer at Country Christian Center, Volunteer Labrador Retriever Rescue of Florida Are you president of your fraternity, head of the condo board, or a team lead for your favorite charity? You’re a natural leader tell it like it is!

Qualifications Summary

Industry experience: Medical Device, Aerospace (Space Shuttle), Military, Manufacturing

Functional leadership and management accountabilities:

•Worked on FDA QSR (21CFR 820/210/211) & ISO 13485 Quality.

•Key interface for, DOD, NASA, FDA, IPC, and ISO & FOD Inspection.

•Led and managed the following functions:

oQuality Inspections, Production Test Engineering, Process Improvement, BGA, SMT, Thru-hole Soldering. Quality Assurance, Line/Receiving/Source Inspection, Calibration, Skills Training, Internal/Supplier/Contract Manufacturer Auditing. Global Supplier Quality Track wise System.

oIn depth knowledge of Mil-spec quality and test specification, MIL-STD 130, 2042, 8031, 8739.1 –3 & NASA 8739 certification out of date currently. NASA Certified Electronic Test Technician.

oUses current comprehension and latest innovation to improve technical efficiency. o Troubleshoot to component level, Equipment Repair Proficiencies, Electromechanical o HAKO & Pace soldering and de soldering equipment.

/ QA Analysis

SIGNIFICANT ACCOMPLISHMENTS

•Inspected and improved FDA Medical Device, ISO 13485 and Pharmaceutical Quality Systems, manufacturing processes, design controls and product reliability systems. ISO Inspection Teams that implemented ISO/FDA-compliant procedures.

•Implemented and general document practice procedures, FDA equipment safety guide lines.

•Supplier Notification of Change (SNC) Process

•Assessed Statistical Process Control for data reporting & performance.

•Competent using schematics, wiring diagrams, blue prints, build of materials, engineering notes, paperless router, Technical Test Design Issues, SMT Production & PCB Repair.

•PCB repair processes and equipment specifically BGA repair and replacement.

•Knowledgeable in Microsoft Office: Word, Excel, Access, PowerPoint Paint, Operating System,

Internet Applications, Blue Beam, SOLIDWORKS, AUTOCAD, MATHCAD

•Computer Testing Programs: LABVIEW 7 – 10, SOLUMINA, JETSLITE, TS-ETHEL, Win Ethel

•Virtual PC, Visual Basic, SAP, ORCAD, PSPICE, PROCOMM, FABMASTER

•Database: Access, JD Edwards (AS400 & Infinity), LABVIEW, Oracle, SOLUMINA, N2FOP, DOS,

Agile, ITAR, SERVLIGISTICS, MCUBE

Corrective Action Issues, Proposal Input, Program Process issues and changes. Following Change Management Process

TEST EQUIPMENT:

•Automatic Test Equipment with / LABVIEW 7 – 10; Gen Rad 2287 (ATE); HP 3070 (ATE);

TERADYNE TSLH124L (ATE); Fluke Digital Volt Meter; Oscilloscope; EPROM Eraser;

•BK851-ND; EPROM Programmer Emp-10, 21,100, Emulator, Frequency Generator BK2005B-ND and Waveform Analyzer, Spectrum Analyzer, Network Analyzer, Signal Generator and Counter, Power Meter.

•FA Analysis of DUT; CISCO Router, Switches, Ethernet port testing, USB Port Testing, SFP and Compact Flash Card test, TX / RX DMA packet test. Testing of WILMA units for cisco wireless routers and switch.

Experience

ICT / FLY DEBUG TECHNICIAN 1 2nd SHIFT JABIL DEFENSE and AEROSPACE SYSTEM 07/2015 TO 03/2016

• Flying probe test along with Assembly and board number, setting up the test and the test palate.

•ICT test, setting up test along ICT test apparatus, test software, MES tracking software.

•Root cause test failure & validation on PCBA on ICT / FLY test failure using the 3/5/10 failure ru Flying probe test along with Assembly and board number, setting up the test and the test palate.

•le.

•Verification of component failure using the FVT test process for verification.

•ICT test, setting up test along ICT test apparatus, test software, MES tracking software.

•Root cause test failure & validation on PCBA on ICT / FLY test failure using the 3/5/10 failure rule.FOD Awareness Certified; ISO 9001 & AS 9100; ITAR Certified; Certified to work and solder on circuit Boards.

•MRB process using FAB, MES / TARS and JACS Traveler.

•Entering all information in to the MES.

•Using the Diagnostic information such as TE Webpages to send the re-test information.

•Using FABMASTER / TEST Expert

•FABVIEW, Document Control, Cross checking Visuals for failure. Also using the flow charts.

•Escalating the test failures up in the process failures.

PRODUCTION TEST TECHNICIAN TATICAL WORKFORCE SOLUTION 01/2015 TO 02/2015

•Using SOLUMINA test software to log in, bring up production visuals, build of materials, blue prints.

•Layout the production materials on the bench; cross check part numbers and assembly numbers against Using SOLUMINA test software to log in, bring up production visuals, build of materials, blue prints.the build of materials, find the memory modules and ceramic heat sink blocks for memory against Using SOLUMINA test software to log in, bring up production visuals, build of materials, blue prints modules.

•Using TUV sealant spread on the back of the memory module then sealing it to ceramic block.

•Setting them up in sets of two in a row on the tray, enter the information for oven time bake information in the SOLUMINA.

CISCO DEBUG REPAIR TECHNICIAN IQOR AMS 03/2014 TO 09/2014

•Using M-Cube software to verify order that are on-time delivery and behind schedule. Also used to verify our numbers that were shipped to back end my percentage of on time deliverables were 95% to 100%.

•Successfully coordinate and arrange products for team members; including communicating with Cisco planners, maintaining logistics for inventory/billing of Cisco Networking Equipment.

•Alerting Test Engineers of test issues on DUT also working with them to resolve various DUT test issues.

•Print out tester production orders for the day, work with tester to resolve various board failures and test issues.

•Setting up and conducting DUT test in the P2C and H2C chamber, along with verifying failure analysis in each of chambers, recognizing which failures were false failures.

•FA Analysis using ProComm testing for troubleshooting failures of units and boards. Verifying that repairs were corrected.

•Using FABMASTER software to trace a part or signal.

•Using SERVELIGISTICS Software, verify on hand Quantity, parts on backorder, ordering repair BGA and SMT parts.

•FA Analysis Repair order entry sending the UUT or DUT to BGA or rework repair.

•IPC 610 / 620; ISO 9001 Certified solder and rework; BGA and SMT troubleshooter & repair analysis, FOD Awareness.

•Closing out the FA Analysis and DUT back to P2C or H2C Chamber Test.

•FA Analysis of DUT scrapping out unit for 3 Strikes Rule or Board Corrosion, Sending it to engineering for test analysis.

•FA Analysis of (GPON) (SFP) DUT test with units using these devices ASA and WILMA units.

•Successfully diagnose and repair various Cisco Networking Equipment for Power, Traffic, Network connections, to the component level.

•Successfully coordinate and arrange products for team members; including communicating with Cisco planners, maintaining logistics for inventory/billing of Cisco Networking Equipment

Test various Cisco Cat4k and Meeting Place Series Networking Equipment which includes: WS-

X4648-RJ45V-E=,WS-X4005=,WS-C4900M,WS-X4014=

WS-C4507R-E,WS-X4516-10GE=,ASA5510-K8,ASA5520-K8,SSM-4GE=,WS-X4515=, WS-X45-SUP6E=,MP-SMARTBLADE=,MP-MA-16,MP-MA-12, PA-POS 10C3, 20C3, SA –SAM, WILMA 2410 and 2410 DC Units; ASA SSM 10, 20, 40; ASA CSC SSM 10, 20, 40.

MANAGING PARTNER SPARKLING CLEANING SERVICE OF TAMPA BAY LLC 05/2007 TO 11/2014

•Soliciting and generating new commercial client transactions and bid proposals using MS Office 2013; creating cleaning map using Drop In specification on SOLIDWORKS and new estimate proposals for potential new commercial business clients.

•Generating new commercial and residential contract business deal that focuses on commercial projects along with maintenance of market and cost analysis.

•Preparation and monitoring of the annual budget for the company; collection of account receivables and income budget for consolidation and submitting to the accountant for review using Quick Books

SYSTEM TEST AND REPAIR TECHNICIAN/CONTRACTOR ZHONE TECHNOLOGIES 02/2013 TO 05/2013

•Verifying that all boards have TUV product labels with MFG, S/N, W/O and Mac Address ID Number on the products

•Functional check of all the boards (visually inspect, check for shorts, power up the board and functional test); connect all associated cables for the various boards.

•On the computer set up various test software to conduct functional test (Agile, TERA Term, Trace 32, XLINK Software and test fixture interface); power up the test fixture.

•Agile look up the board number; current and latest revision number any ECO issued; bring up the BOM, part layout & schematic.

•JTAG the boards using the latest System up command and execute test; verify the latest firmware revision; verify where to connect the JTAG and pin 1 on the board using schematic and parts layout.

•IPC 610 / 620 Certified; ISO 9001; FOD Awareness.

•Creating and assembly of TUV product labels with MFG, S/N, W/O and Mac Address ID number on the products.

In-Circuit testing of UUT communication ROHS boards for (CPE-DSL and ADSL modems, WIFI; Terra-bit Access Concentrator; zNID- Ont- FFTx with 24Voice and Board) testing using (GPON) (SFP) with Z hone Testing Software.

VALIDATION ENGINEERING TECHNICIAN / CONTRACTOR JABIL MEDICAL DEVICES 05/2012 TO 07/2012

•Creating excel inspection protocol documentation sheets for Polaris DVT Project for tracking protocol test data.

•Performed Engineering run to our vendor suppliers to pick parts up to be courier over to china.

•Install electrical and electronic parts and hardware in housing and assemblies using solder equipment.

•DVT Functional Testing of (Image Capture Test Protocol); capture the images, storing them on media file.

•FOD Awareness training and certification; IPC 610 / 620 and ISO 9001 – 2010.

•Performed on tooling diameter 1st Article Inspection and Measurement for (Distal Alignment Fixture) PVT Build.

•Inspect components for compliance with fabrication drawings and specification using precision measuring digital calipers.

•Operated the DVT Functional (Feeding Tube Electrical testing Protocol) recording and analyzing thermal recording and test measurements, recording the data on paperwork and excel sheet.

•Conducted DVT Functional Testing (Bolus Diameter MSA Laser Micrometer Protocol) measuring different diameter test data, entering data on excel sheet.

•DVT Functional Testing (Hydrometer Coating Test Protocol) for 8Fr STYLET Feeding Tube recording test data and entering data onto the excel sheet.

•DVT Functional Testing and power up & video capture of UUT with Polaris Console.

•DVT Failure Analysis of DVT build and failure protocol documentation recording test data failure and entering the data, recorded photo of failure analysis.

•DVT and PVT Engineering prototype build and inspection.

•Engineering project creating excel visual loop table for the PVT Visual Aide and work instruction also editing visual aide.

P/T TSA SECURITY OFFICER TSA / DEPARTMENT OF HOMELAND SECURITY 03/2011 TO 11/2011

•Ensuring the safety of passengers and Airlines while using security procedures.

•Calibrating and operation of X-Ray, FIDO, BLS, AIT imaging Scanners.

•Making certain that security measures are used effectively and all security equipment is vigilantly used in manor guarantee the proper level of SSI information.

MANUFACTURING ENGINEERING TECHNICIAN / CONTRACTOR DRS LAUREL TECH. 11/2009 TO 02/2010

•Administered hands-on DOD and Mil-spec & requirements streamlined the issues for production operators, and analyzed the wiring diagram, router, tooling & cut list for P-job instruction along with photo documentation of the build. Control ITAR Related document.

•Generated, proofread and edited SPS-87 P-job work instructions from router to include organized photo published to fit to page using AS – 9100 standards, MS Power Point, MS Word.

Saving it to FTP and transfer to the database server for upload to visual work instruction.

•Assessed the P-job final inspection lock out tag and report, document correction procedure and initial the corrections. Researched the corrections with inspection using schematics, Blue Prints and wiring diagrams using Cadence Schematic Capture Software.

•Rewired the SPS – 87 P-Job wiring projects with production operator, verified wire gauge, the crimp tool setting, connector termination & ground lugs. Complex wiring harness.

•SMT PCB rework and repair process using HAKO soldering & de-soldering equipment.

•Removal process and re- installation of SMT & BGA components & trace.

•Assessed the P-job final inspection lock out tag and report, documents correction procedure and initial the corrections.

•Researched the corrections with inspection using schematics, blue prints and wiring diagrams using Cadence Schematic Capture Software.

•Rewired the SPS – 87 P-Job wiring projects with production operator, verified wire gauge, the crimp tool setting, connector termination & ground lugs. Complex wiring harness.

•SMT PCB rework and repair process using HAKO soldering & de-soldering equipment. Removal process and re installation of SMT & BGA components & trace.

LEAD ADVANCE ENGINEER / CONTRACTOR HONEYWELL AEROSPACE 03/2009 TO 05/2009

•Generated the hardware qualification of the (INU) (UUT) system level box; testing and calibrating aerospace navigation units on all phases of environmental testing using (vibration - testing, shock testing, temperature/TVAC testing, etc.) support of the sub assembly (Circuit Card Assembly) testing and system level (box) integration and test, which includes vibration, thermal, thermal-vacuum, EMI, and other environmental testing support I also used same procedure to connect the cables and automatic test equipment with / (Wings & Jets-lite software): conducting environment testing using H2C thermal and vibration unit chambers and to perform test sequence using ISO 9001 – 2001 Standards.

•Troubleshoot and conducted the diagnostic software on RF and WIFI circuits using Honeywell; Automatic Test Equipment w/Jets-lite software on System Level and CCA assembly.

•Using AS-9100 procedures reconstructed all system level events and failures accurately in the E-Factory data book. Compiled the engineering test and calibration of the Inertial Navigation Unit per formal test direction accumulate test data and document per engineering standard and update e-factory status. Control ITAR Related Documentation.

•Test and certify rate and position accuracy, alt orientation equipment level and sub arc zero tolerance. Support test integration activities, pro to-qualification testing, troubleshooting, and provide daily communications.

•Troubleshooting UUT (INU) failures and false failures using pneumatic power and hand tools on the environmental; temperature /TVAC and vibration chamber using DVM, Waveform Analyzer, Spectrum Analyzer, Signal Generator and Counter, Power Meter using blue print, schematic, wiring diagram.

•Audited test report and results for GMP and GDP documentation errors, for correct information on burn in result, per time, date and time, pass or fail.

•Rewired the P-Job wiring projects with production Operator, verified wire gauge, the crimp tool setting, connector termination & ground lugs. Complex wiring harness for F-37 project.

•Reworked the wiring completed the soldering using J-hook standard on the INU project as per Honeywell NASA Vestibule Standard.

QUALITY ASSURANCE ENGINEER / INSPECTOR / CONTRACTOR BAXTER HEALTCARE INC., 11/2007 TO 03/2009

•In – process, shipping and final inspection of Hemo-Dialysis process and DHR travelers for Dialysis & DHR travelers. As an inspector have reviewed that all documentation, signatures and test information technician used the above mention was valid and no falsification.

Reviewed all tester and technician documentation paperwork and data entry results for test data, date, time, temp and initials; also for calibration date and code on equipment for battery, E-Prom memory; DVM, O-scope, Vector Scope, Pneumatic tools for signature and date.

•Audited test report and results for GMP / GDP documentation, correct information on burn-in results, per time, date and temperature, pass or fail.

•Conducted internal FDA and ISO audits, then recommended and implemented needed changes.

•Wrote and handed in revision of factory and administrative SOP’s and Quality Manuals to improve business and operating efficiencies and assure FDA/ISO quality system compliance.

SYSTEM TEST TECHNICIAN / CONTRACTOR LOCKHEED MARTIN AEROSPACE 09/2007 TO 11/2007

•I conducted the functions of checkout, case checkout, Fat test of UUT according to test procedure and military specifications. Control ITAR Related Documents.

•Prepared the Automatic Test Equipment with / SOLUMINA Software for the test and data performance on the UUT, using DVM, O-scope, Vector Scope, Frequency Counter and Generator, Spectrum and Network Analyzer, Power Meter to verify test data and results on FAA Radar Vector Scope checking Cat 5E, USB.

•I computed the inspection and cable ring out test according to the test procedure on fiber – optic cable and wiring harness.

•Launched the test on fiber optic cable and wiring harness using optical power / source meter, optical switch controller, optical laser pointer.

THE NIELSEN COMPANY / ELECTRONIC TEST AND REPAIR TECHNICIAN / 06/1999 – 05/2007

•I performed field equipment return using Bench Test Equipment and maintenance on all field equipment returns, verify what repairs to microprocessor equipment is needed and what engineering change orders upgrades as per ISO – 2000 and IPC – 610 and 620.

•My projects conducted bench, automatic and final test with Nielsen Ate w / Lab view (7-10) software on Mark II and A/P field equipment. (TVAC and EMI environmental testing): included thermal, EMI, Burn - in environmental testing of Mark II and A / P set top boxes.

•Troubleshoot and diagnosing CCA cards and Set Top Boxes failures and false failures using DVM, o-scope,, vector scope, functional generator, signal generator and counter; along with schematics, blue prints, wiring diagrams and build of material on circuit boards and down to component level. Also used various pneumatic and power tools to disassemble CCA cards and Set Top Boxes.

•Organized UUT test, verified pogo pins, cables and software, checked UUT, CCA Card & Cables for bent pogo pins or broken cables loaded software on Bench, ATE and Final Test Equipment were functionally operating with golden board, cable and verified test program using golden board (CCA) or cable UUT.

•Conducted the test operation of bench, functional and automatic testing on RF CCA Cards and / or WIFI CCA Card assembly on Mark II and A/P digital set top boxes and their associated RF and WIFI cables. Troubleshooting and diagnosing Mark II and A/P set top boxes, their CCA cards and cables using DVM, O-scope, vector scope, functional generator, signal generator and counter.

•Compiled, edited and proofread the test operating procedures; also composing oral reports on diagnosing test function failures and false failures along with technical analysis report using PSPICE schematic software. Following the Change Management Process documentation.

Class 3 electronic assemblies, having performed rework down to fine pitch SMT, BGA level and thru hole including component prep, trace, pad and barrel repair; performing production and hand soldering, electronic and mechanical assembly.

•Reconstructed complex wiring harness, and terminated various connector and strength type crimping, ground lugs and restored many of the harnesses for System set top boxes.

•SMT PCB rework and repair process using HAKO soldering & de-soldering equipment.

•Removal process and re installation of SMT & BGA components & trace.

•Researched equipment purchases based on ROI with Agile & Microsoft Excel.

Contact this candidate