Ken Wood Senior Electro-Mechanical Design Specialist

Cell: 850-***-****

POSITION OBJECTIVE

I am seeking a position that can utilize my vast years of design experiences and the creation and control of engineering applications in the areas listed herein. Applied increase valued products in the drafting and 3D modeling fields with the highest quality possible in a team oriented environment.

PROFILE SUMMARY

I have a vast number of years of creating and maintaining engineering application drawings/documents and the association between these drawings and 2D and 3D modeling (Parametric Applications). I have extensive assignments in the creation of configuration control and its implementation of drawings and other documentation, and with version and revision control (Vault, Revit, CMPRO, Wildfire and others). These documents insure design compliances with standards including ASME, PIP, ISA, ANSI, DOD, DOT, DOE, Mil-standards and many others. I have maintained clear and concise coordination between engineering, drafting, marketing and manufacturing applications with a high level of quality and project scheduals, “On Time and On Budget with customer satisfaction..

CORE COMPETENCIES:

Drafting and Design

Mechanical Drafting (2D drawings and 3D Model coordination of parts, subassemblies and top assemblies, Piping designs using Revit Family creator, and P&ID drawings. Mechanical and electrical 3D and 2D drawings for sheet-metal fabrication)

Electronics Drafting (Schematics, Flow diagrams, Parts builder, Board layout & Component layouts)

Electrical Drafting (One-line schematics, Panel locations, PLC module designs and etc.)

Architectural Drafting (Building applications and Water treatment plants, including nuclear waste water, storm water run-off, HVAC, MEP, architectural, civil and etc.)

Civil Drafting (GPS location drawings, Survey drawings, Civil 3D land and Revit development drafting)

PCB Drafting (PCB designs, Schematic capture, Fabrication drawings and etc.) Modeling

Mechanical parts and assemblies in 2D and 3D modeling applications for fits and tolerances including process piping and pneumatic designs.

Cable harnesses and data connectivity for assemblies and data generated point to point connectivity.

Rendering applications for real visual marketing and sales effects with Autodesk Showcase.

Animations configuration and file creations using Autodesk Showcase.

Stress analysis creation for engineering design review using Autodesk stress analysis applications.

Heat transfer applications and temperature control using Autodesk applications.

3D Modeling for Family File creation using Revit. Equipment Transition and location assurances.

Revit coordination Applications.

CONFIGURATION MANAGEMENT ANALYST

Configuration Management (Vault Professional and BIM Applications)

Network Structuring

Template Application (Configuration standards)

Training Applications (Including college classes)

Standards Control Application

CAD TRAINING INSTRUCTOR

AutoCAD (Beginning to Advanced Modeling)

AutoCAD Mechanical 2016 Certified

AutoCAD Electrical 2016 Certified

AutoCAD Inventor 2016 Certified

AutoCAD BIM and Revit 2016

Revit Modeling with Family Editor

AutoCAD Showcase and 3D max for Realistic model Rendering.

ProE (CREO) (Mechanical)

ORCAD (Schematic Capture and PCB Layout Design)

Autodesk Revit 2016

EXPERIANCES (Last 10 years)

Sep, 3, 2016 to Mar, 17, 2017; (6 month Contract) Process Engineering with Haskell

Duties include design of 3D Family equipment and placement location in Revit file, creation of P&ID Drawings.

Aug, 12, 2013 to Sept 2016; Senior Designer & CAD Coordinator • BCR Environmental

Duties include design of 3D mechanical and electrical parts and sub-assemblies using AutoCAD 3D Mechanical and Autodesk Inventor 3D with Autodesk Vault Professional PLM. Create designing of assemblies to insure standard compliances and engineering processing with respect to equipment locations and customer requirements. Develop and maintain a PLM system (Autodesk Vault Professional and Revit) Assignment of tasks and file approval for version and revision control of all engineering application files and supporting reports. Create documents and images of marketing 3D visual files for customer review using Autodesk Showcase 3D software that rendered all designs for realistic visualizations and connectivity. The products were used in the creation of Waste Activated Sludge (WAS) to a Class B composting state, including supported building Mechanical Electrical and Plumbing (MEP) and pneumatic designs.

Oct, 2008 to Aug, 12 2013; Senior Drafter III • ITT Exelis ES MDS

Duties include design of, 3D mechanical and electrical parts and assemblies using AutoDesk Inventor 3D 2013, Solidworks and CREO, Intralink Windchill 3.0, insurance of standard by checking drawings for standard compliances. Setup and implement ASME electro-mechanical settings for the use of 2D and 3D AutoCAD Mechanical. Assign all drafting tasks and peer check all documents, direct all new and updated standards, and assist in detail drawings, models and assemblies. Maintain acting lead draftsman for six drafting personnel. Layout new building for equipment locations as well as water, electrical, sewage applications using Revit and Family editor. Design of K-Unit for the Navy with applications of mechanical and electrical parts, assemblies and subassemblies.

Mar., 2007 to Oct., 2008; Senior Design Specialist/Acting CAD Manager • Bailey, Bishop & Lane, Inc.

Duties include design and layout of, 3D piping for storm and waste water systems control, 3D and 2D piping for sanitary sewer control, piping for potable water, and supporting pneumatic and electrical equipment designs. Additionally, was acting CAD Systems Manager, with duties that included implementation of new software and personnel training for Autodesk Civil 3D 2008 for the three branch offices containing over 20 employees, develop in-house drafting standards, review and create training manuals for all professional students involved in designing in 3D modeling applications, set-up all 3D styles, libraries and settings for every branch office, support all Designers and Engineers on 3D 2008 software implementation and use. Maintain procedures for engineering documentation control (issue and revision).

Feb., 2006 to Mar., 2007; Senior Design Specialist • Preble-Rish, Inc.

Majority of projects were in piping for wastewater treatment plants, piping for storm water control, piping for sanitary sewer control, all piping designs from P&ID drafting documentation as well as supporting electrical control systems. Site planning and lot layout of subdivisions with customer controls. Most projects were in the governmental sector, with a few projects presenting themselves in the private sector. Work was completed using AutoDesk AutoCAD Civil 3D 2007.

Nov., 2003 – Feb., 2006; Senior Designer • Southeastern Engineering Incorporated

Valve and motor designs, including layout facilities design, 3D piping for wastewater treatment design, creation of P&ID drawings, 3D piping for sanitary sewer system design, 3D piping for stormwater systems design, with all supporting electrical equipment and GIS piping layout location applications and other additional drafting applications using Autodesk Civil 3D and Inventor 3D. Design of Subdivisions including road design, lot design for water drainage and driveway layout in 3D models.

PROFESSIONAL REFERENCES

Keith Hunsucker; CEO Think Resources (Randstand)Atlanta Georgia 678-***-**** 770-***-****

Bob Podsiadlo; ThinkJobs.com

SEI Chad Epple; President Southeastern Engineering Inc. Marietta Georgia

Brian Bowen; Field SEI Engineer 770-***-****

Steve Markiewicz; Exelis Configuration Management 850-***-****

Brian Fish Exelis; Director of Operations 850-***-****

Paul Hunt; Retired Engineer Lynn Haven Florida 850-***-****

Bob Schmidt; Director of Engineering 904-***-****

Fred Mussari; Director of Research and Development 321-***-****

PERSONAL REFERENCES

Tonia Wood, Marietta, Georgia 850-***-****

Paul Hunt, Lynn Haven, Florida 850-***-****

Bob Miller, Electrical Engineer port St. Joe Florida 850-***-****

PERSONAL & PROFESSIONAL TRAINING

AutoCAD Mech AutoCAD, Elec AutoCAD Vdult, AutoCAD Inventor, AutoCAD Revit, Intergraph Microstation, IntelliCAD, ComputerVision System, Calma, CADAM, Orcad, P-Cad, Pro-CAD, Solidworks, Autodesk Civil 3D 2012, and AutoDesk Inventor, ProE, Protecting Classified Information Course, FCPA Part 1 Understanding The Law, Code of Corporate Conduct, 101 ITAR awareness Course, 103 ITAR Introduction Course, Government Contracts, AutoCAD Mechanical, AutoCAD Electrical, Revit 2016.

PERSONAL ACHIEVEMENTS:

National Vice Chairman, Telesis User Group (Printed Circuit Board Design Software)

Manufacturing Quality Assurance Team for PCB Manufacturing/Fabrication Plant Approvals

Quality Assurance Engineer for Ross Hill Controls, CAD Developer for CADAM approval & installations and trainer. Develop CAD applications with standards in electrical and mechanical. Introduction of 3D CAD to engineers and designers in fabrication and assembly manufacturing.

4 Years, Semi-Professional Football (Quarterback & Offensive Coordinator)

Air-to-Ground Missile Electronics Technician, United States Air Force, IBM Mainframe Technology

Author, in-house engineering design drafting manual (12 volumes) for printed circuit design and mechanical packaging, AutoCAD Civil 3D Manuals for in-house training, Taught AutoCAD 3D and 2D applications from begging to design to advanced modeling and FEA.

Technical Advisor, for Printed Circuit Design Magazine and Printed Circuit Manufacturing Magazine.

Vice President and General Manager of Sector Research, with directional activities to 138 employees including the engineering, printed circuit design, accounting, drafting, technical advice in PCB fabrication, and administration departments. field engineer for Telysis Systems, CAD Manager for ITEC Inc.

2 PCB Designs for the NASA Space Station, 6 PCB Designs for the Discovery Mission, 7 PCB Designs for the M-1 Tank, 2 PCB Designs for the Tomahawk Missile Program

Contact this candidate