Project Mechanical Engineer

CURRICULUM VITAE

PERSONAL IDENTITY

Name : ILTUTMIS, ST

Sex : Male

Marital Status : Married

Nationality : Indonesia

Hp : +62-852*-****-*** (Indonesia)

: +62-857*-****-*** (Indonesia)

Email : **********@*****.***

Address : Perumahan Masyeba Indah M/22 - Batam - Riau Island

Passport No : B 3126917

Language : Bahasa Indonesia - English

SKYPE : ILTUTMIS iltutmis

EDUCATION

Degree of Mechanical Engineer of Engineering Faculty, Andalas University, Padang, West Sumatera, Indonesia.

OBJECTIVE

My personality as a hard worker, a highly motivated, creative, full of idea and intention toward improvements. Capable to work independently and as a team either, easily to communicate among all levels of people, good team player, ability to work with minimum supervision, excellent organizational and fast learner type of person would bring benefit to your company.

SUMMARY

Since 1999 have been involving in cement, manufacturing, third party and inspection. Have good experience interpretation standard and code (BSEN, AWS, ASME, API, and ASTM), Quality Assurance/Quality Control inspection activities (PQR-WPS-WQT, method of NDT-NDE) under specification project. Understand of work sequence welding fabrication (before, during, after welding, repair), installation and pre-commissioning prior to start up the project (modules associated piping, structural and mechanical, pressure vessel, storage tank). Familiar in using several kind of welding measurement tools.

QUALIFICATION AND COURSE/TRAINING

Certified CSWIP 3.1 Welding Inspector Level 2 - TWI Training & Examination Services - Cert No. 98324

Certified CWI Welding Inspector - Offshore Technology Institute

Certified ASNT NDT Radiographic Interpretation Level 2

Certified ASNT NDT Ultrasonic Testing Level 2

Certified ASNT NDT Liquid Penetrant Testing Level 2

Certified ASNT NDT Magnetic Particle Testing Level 2

Certified AK3 (Occupational Safety & Health Professional)

Project Management - PMGS Group (Project Management Institute of Singapore)

Auditing Skill based on ISO 19011:2011

PROFESSIONAL EXPERIENCES

April 2016 - January 2017

Employee: ASIAN SEALAND ENGINEERING PTE LTD

Position: QA/QC Inspector Coordinator

Project Brief: Yamal LNG Structural Electical House (Train 3 Compressor A/B Substation)

Client: YAMGAZ Consortium Technip, JGC, Chiyoda

Location: PT. Siemens Batam Yard - Onshore

Scope of Work: Steel Structure & Piping Fabrication

Job Descriptions:

To carry out visual inspection of structural / piping work assemblies and execute the field welding inspection, surveillance and Quality Control activities on site, collecting the relevant objective evidences. Ensure all welding operations are executed in accordance with all relevant Codes of Practices and Company procedures. Execute the specific inspections on materials, equipment and construction / installation activities on site. Verify welding parameters and consumables during installation / construction activities, procedures and welders qualifications. Check the availability and suitability of the welding equipment, heat treatment and any hardness testing in compliance with the relevant codes and specifications. To analyze, maintain, coordinate and troubleshoot punch lists inspection issues. Ensure the correct implementation of the approved Quality Control Plans / Inspection Test Plans relevant to welding by organization in charge of construction activities.

March 2016 - April 2016

Employee: PT. KWARSA HEXAGON

Position: Fabrication Inspector

Project Brief: Limestone Crusher (Structural, Mechanical and Electrical)

Client: PT. Semen Padang - Indonesia

Location: Indarung VI Yard - Onshore

Scope of Work: Steel Structure Fabrication

Job Descriptions:

Execute the field welding inspection, surveillance and quality control activities on site, collecting the relevant objective evidences. Ensure all welding operations are executed in accordance with all relevant codes of practices and procedure, execute the specific inspections on materials, equipment and construction/installation activities on site. Verify welding parameters, consumables during construction activities, carry out visual inspections and witness packaged delivery.

November 2015 - March 2016

Employee: PT. RINA INDONESIA

Position: Third Party Inspector (On behalf RINA S.p.A)

Project Brief: Saipem - Tripatra - Chiyoda Joint Operation

Job Descriptions:

Conduct witness FAT on fitting and flange at FEDERAL HARDWARE ENGINEERING CO.PTE.LTD, 12 Chin Bee Drive - Singapore. IRN of applicable package delivery, visual inspection, dimension and material certificates (heat number).

Project Involved

PHE 12 & PHE 24 Piping Bulk CPP2 PHE WMO Project (PT. Pertamina - Indonesia)

Conduct welder qualification test (WQT) and NDE/NDT (RT) check for vendor SPX FLOW, Inc. 25 International Business Park, #03-03/12, German Centre, Singapore 609916, TEL +65 6568 1516, FAX +65 6265 9133

Project Involved

Jangkrik Complex Project - EPSCC of Two Converted FPSO (Saipem, Tripatra, Chiyoda, Hyundai)

Conduct witness FAT on off valve at MATCO ASIA PTE. LTD, 19 Joo Koon Crescent - Singapore. Review of applicable Quality procedure, material certificates, testing method (leak test, actuator assembly) and equipment calibration result.

Project Involved

PHE 12 & PHE 24 Platform Development PHE WMO Project - Actuated Valve Assembly (PT. Pertamina - Indonesia)

Final documentation review of applicable Quality procedure, Inspection and Test Plan, material certificates, NDE/NDT, welder qualification, testing method, dimensional and equipment calibration result base on MDR document report.

Project Involved

Jangkrik Complex Project - Produced Water Treatment Package (Saipem, Tripatra, Chiyoda, Hyundai)

May 2015 - October 2015

Employee: PT. JAMRUD ANDALAS JAYA

Position: QA/QC Inspector

Project Brief: Main Contractor for Batam Island Pipelines and Gas Filter Project

Client: PT. Perusahaan Gas Negara (PGN)

Location: Onshore Indonesia

Scope of Work: Pipelines Fabrication

Job Descriptions:

Carry out dimentional inspection per work. Supervise the supervising installation works properly. Review of incoming raw material to verify tracebility and various inspection consumable. Pre-welding weld joint fit-up inspection and in-process welding inspection. Responsibility to plan and schedule the work within the given deadlines. To ensure the efficiency of the piping system that if it is working properly and follow up issue Non Conformance Reports (NCR) and punch list as necessary. Daily inspection check welding parameter, storage and handling, pre-heat implementation as per WPS used then perform visual inspection and ensure the safety measures.

May 2014 - May 2015

Employee: PT. SCHNEIDER ELECTRIC - TELEMECANIQUE

Position: Project Engineer

Project Brief: Sensor Limit Switches

Job Description:

Oversee and coordinate the execution of project activities from contract review phase to close by various PT. Schneider Electric. Leading participant in creating, launching or implementing new products and developing and defining business requirements to launch new products. Preparation cost estimates, scopes of work, scheduling start production till shipping, method of statement and risk analysis. Prepares work to be estimated by gathering proposals, blueprints, specifications and documents. Responsible to perform cost analysis, contract review and select best supplier to meet the product requirement as audit conducted.

September 2013 - March 2014

Employee: JKC AUSTRALIA LNG PTY - CHIYODA CORPORATION

Position: QA/QC Inspector

Project Brief: Roof Tank LNG and Piping

Client: KAWAZAKI Heavy Industries

Location: PT. Profab Indonesia Yard - Onshore

Scope of Work: Steel Structure Fabrication

Job Descriptions:

Check cutting, marking and transferring heat number material. Ensuring fit up and joint preparation as per approved WPS such as internal or external misalignment, root gap, angle bevel. Make sure the cleanliness of join preparation (free from oil, wet, dust, and contaminant). Check and correct consumable used, correct WPS used, correct welder qualification for welding. Visual inspection for completed welding, and the welding is free from crack, distortion and meets the client specification and acceptance criteria in AWS D1.1. Arrange the NDT and make sure identification for any join number in erection is suitable with NDT drawing and documentation system.

August 2012 - July 2013

Employee: PT. DOLLY PUTRI MARSADA

Position: QA/QC Inspector

Project Brief: APLNG Substation Building 1A-4056 and Loading Area Building 0A-4010

Client: Conoco Philips

Location: PT. Siemens Batam Yard - Onshore

Scope of Work: Steel Structure Fabrication

Job Description:

Inspection of fit-up, welding and weld visual at site and yard. Conduct the welder test prior to start the fabrication activities. Material verification (heat number and identification comply to certificate) and check the material condition is free from damage, witness dimensional, check fit up and joint preparation as per approved WPS such as misalignment, root gap and bevel angle. Daily inspection activities check and correct consumable used and perform visual inspection for complete welding to meet the client specification and acceptance criteria. Review NDT result that performed by NDE company.

April 2011 - May 2012

Employee: PT. ROTARY ENGINEERING INDONESIA

Position: Welding Inspector

Project Brief: Pressure Vessel, Cement Tank, Piping and Skid Fabrication

Client: PT. Profab Indonesia - Technics Offshore - Halliburton Indonesia

Location: PT. Rotary Engineering Indonesia - Onshore

Scope of Work: Structure & Piping Fabrication

Job Description:

Ensure welding maintenance activity before project started. Conduct the batch test for consumables. Qualification the machine of welding process. Monitoring and ensure the using of approved procedures. Preparing preliminary welding procedures for projects. Check the materials are per requirements. Ensure the). Ensure follow project specific QC related procedure and document (i.e. Welding Procedure, Dimensional Control Procedure, Hydrostatic Test Procedure, Leak Test Procedure, preheat per requirements (WPS)). Monitoring requirement test such as NDE/NDT is done. Executing procedure qualification test, welder qualification test and reporting. Preparing of weld joint traceability and material traceability records (MTR, MRIR). Responsible for preparation and conducting of Hydrostatic and Pneumatic Air Leak Test with the assistance of production worker.

February 2010 - March 2011

Employee: PT. NEXUS ENGINEERING INDONESIA

Position: QC Structural Inspector

Project Brief: North Belut Central Processing Platform

Client: McDermott Indonesia

Location: PT. Nexus Engineering Indonesia Yard - Onshore

Scope of Work: Steel Structure Fabrication

Job Description:

Check fit up and joint preparation as per approved WPS such as internal or external misalignment, root gap, angle. Check the cleanliness of join preparation. Check the material traceability by heat number identification and material condition are free from damage and unacceptable condition as per client spec. Daily patrol inspection activities, make sure pre-heat implementation as per WPS, check and correct consumable used, correct WPS used, correct welder qualification for welding assignment. Visual inspection for complete welding, the welding is free from crack, distortion and meet the client specification and acceptance criteria. Responsible for preparationt of Test Packages (NDE/NDT).

February 2009 - January 2010

Employee: PT. ROTARY ENGINEERING INDONESIA

Position: QC Piping Inspector

Project Brief: Separator Vessel, Surge Tank, Diverter Manifold Packages

Client: PT. Profab Indonesia - Halliburton Energy Services

Location: PT. Rotary Engineering Indonesia - Onshore

Scope of Work: Pressure Vessel Fabrication

Job Description:

Daily inspection activities is ensure pre-heat implementation as per WPS, check and correct consumable used, correct WPS used, correct welder qualification for welding, perform visual inspection for complete welding, the welding is free from crack, distortion, meet the client specification and acceptance criteria, arrange the NDT requirement as per weld map, coordinate with client for final inspection. Responsible for calibration validity of measuring and testing equipment to be use.

October 2002 - January 2009

Employee: PT. PSEC BATAM INDONESIA

Position: QA/QC Supervisor

Project Brief: HDD, Blu Ray Disk

Job Description:

Responsible to establish general process method and instructions QA/QC as per BOM/Specification and originates visual aids, alert notice and other process document. Responsible to conduct regular process audits to ensure all processes parameters are consistently within product specification. Do dimensional inspection after end preparation and re-qualification by QA/QC according with latest revision of drawing. Responsible to collect checksheet and other control document to make sure all are filled up and kept properly as ISO standard.

March 2001 - May 2002

Employee: PT. NSP TECHNOLOGY BATAM

Position: Production Supervisor

Scope of Work: Medical Life Equipment

Job Description:

Lead, control and manage man power to action quality and quantity target. Ensure delivery output based on accuracy and volume reliability. Control daily production output. Motivate and encourage leaders and operators under my supervisions.

March 1999 - September 1999

Employee: PT. SEMEN PADANG

Position: Mechanical Engineer

Scope of Work: Dust Filter Cement Silo Project - Indarung IV

Job Description:

Drawing cement silo and compose both part list. Part order list to make dust filter. Check and inspection the fabrication activities. Update drawing document to complete commissioning.

REFERENCES

Mr. Peryasamy Many

QA/QC Manager Asian Sealand Engineering Pte ltd

Email: *********.****@********.***.**

Fardinal Syafri

Senior Project Engineer PT. Profab - NOV Indonesia

Email: ********.******@***.***

I certify this statement is true, complete and correct to best knowledge and believe.

ILTUTMIS, ST

Contact this candidate