Post Job Free
Sign in

product designer

Location:
Howell, MI
Posted:
April 04, 2017

Contact this candidate

Resume:

David D. Azar

**** ******** **.

Howell, MI - U. S. A. - Tel: 810-***-****

Please visit my LinkedIn page

*********@*****.***

Objective: Seeking full time employment as a Senior Automotive Body Designer/Engineer or Product Designer/Engineer.

Qualifications:

Highly skilled at Unigraphics/NX, up to and including Version 9

Teamcenter, Version 9

Viz Mock-Up, Version 9.1

Expert in 3D Modeling and Class A Surface Development

Experienced in NX Drafting Operations

Knowledgeable with most Tooling Methods and Processes

Extremely adept with the deployment of Lean Engineering and Manufacturing Techniques

Experienced in Fabrication, Assembly and Manufacturing Process Engineering

Extensive experience in Data Management

Thorough comprehension of GD&T: with regard to Tolerance. I have not used it in drawing format for several years due to being pegged as a lead designer. My superiors gave me responsibilities for such duties that precluded my being used as a draftsman or drawer of prints.

Experience in Microsoft Office

Most willing and able to learn other Computer Augmented Design Software

U.S. Citizen: Born and Raised in Detroit

Experience:

Self Employed: Detroit Design and Development, LLC 10/16 - Present

Chief Designer/Chief Engineer

Architectural Design and engineering

Artist

Product Design and Development

In Process of learning Catia

EDAG via Right Angle Staffing 01/2015– 09/16

Senior Product and Automotive Design and Engineering

Utilizing UG/NX for design and development of a wide variety of commodities; automotive and truck product development from styling through engineering and production.

Class A surface development

Math Model File Organization

Structural packaging and Design

Interior and exterior plastic parts and assemblies and related attachment hardware.

Sheet metal and BIW development with an emphasis on weight and cost reduction.

David Bogdan Builder 05/2014– 01/2015

Senior Architectural Design and Build

Residential, Commercial and Structural - Manual Design and Build

Ground Up Development; Foundation, Sub-Structure, Structure, Utilities (Electrical, Plumbing, HVAC and Telecom).

General Motors 06/2012 – 5/2014

Senior Automotive Body Designer (Contract-Aerotek Engineering)

Engineering and Design of Exterior Trim (Hood Extractors, Door Claddings, Rocker Moldings, Sill Plates, Body Appliques, Roof Ditch Moldings and Luggage Racks and other Body Side and Front & Rear End Trim) components and assemblies utilizing NX 8.

Engineering and Design of Body Structure (Rear End Panel & Assembly) components and assemblies utilizing NX 8.

Releasing Parts and Assemblies in all stages of development from Beta through

Production with the latest GM Versions of NX, Teamcenter 9 and Vis-Mockup 9.1.

Chrysler – CTC – Auburn Hills, MI 06/2011 – 04/2012

On The Job Trainer/Mentor in Teamcenter and NX (Contract-Tata Technologies Inc.)

Provided Instruction in Teamcenter and NX

Some Instruction in VisPro

General Problem Solving

Navistar, Allen Park, MI 03/2011 – 05/2011

Senior Truck Body & Chassis Designer – Engineer (Contract-Roush Industries)

Engineering and Design of exterior body panels, components and hardware utilizing Unigraphics.

Class A surface development

Engineering and Design of chassis, bumper and body panel to chassis brackets.

Exterior mirror assembly design.

Restraint design and packaging.

Navistar, Tulsa, OK 06/2010 – 01/2011

Senior Bus Body & Chassis Designer – Engineer (Contract-The Experts)

Engineering and Design of exterior and interior body panels, components and hardware utilizing Unigraphics.

Class A surface development

Structural engineering and design of bus body to bus chassis attachments.

Extensive post-design data management.

Body in white design

Side door and rear escape door development

Bus chassis development

Navistar, Fort Wayne, IN 08/2008 – 04/2010

Senior Truck Body Engineering Designer - Engineer (Contract-Engineering Resources Inc.)

Engineering and Design of exterior body panels, components and hardware utilizing Unigraphics.

Class A surface development

Redesign and engineering of existing structural, exteriors and ornamental components emphasizing cost and weight reduction.

Liaison engineering with suppliers to attain tooling and product change cost estimates.

Extensive post-design data management.

Body in white design

Transmission shifter boots

HVAC with hose and duct routing

General Motors 08/2007 – 07/2008

Senior Automotive Body Designer (Contract-Altair Engineering)

Engineering and Design of electrical wiring harnesses and components utilizing Unigraphics.

Design, detail and layout for electrical wiring for completion of major components. Inner door (window, lock, mirror, mechanical seat and sound system wiring layout), instrument panel (gauge, lighting, sound system, signals, HVAC and accessory wiring). Plus console, interior and exterior lighting, sun roofs, Yaw sensor and air bag, drive train sensor and ignition systems, defoggers and wipers, etal.

General Motors 7/1999 – 01/2006

Senior Automotive Body Designer (Contract-Gilbar & Gonzalez Engineering )

Engineering and Design of exterior trim and exterior lighting (head lamps, marker lamps, turn signals, tail lamps, CHMSLs and appliqué lamps)

Class A surface development

Engineering and Design of Sunroofs and routing of electric harnesses and drain tubes

Engineering and Design of attachment hardware and fasteners

Worked as a mentor in design utilizing Unigraphics

Crucam Inc. 08/1998 – 07/1999

Senior Automotive Body Designer (Contract)

Engineering and Design of instrument panels, and related structure

Class A surface development (Unigraphics)

Engineering and Design of consoles and HVAC duct/routing

Engineering and design of other interior trim and abutments (including air bags and restraints)

Interior door trim with electro and mechanical routing

General Motors 05/1995–08/1998

Senior Automotive Body Designer (Contract-Engineering Technology Inc.)

Engineering and Design of structure

Engineering and Design of interior trim and flooring (carpet and insulation)

Engineering and Design of exterior trim

Class A surface development (Unigraphics & CGS)

Engineering and Design of harness routing, connectors and fasteners

Interior and exterior door design with emphasis on structure and safety (impact worthiness)

This engineering office was divided into groups based on zones; by this I mean that my group handled everything from the firewall to the rear deck and everything from the ground to the 750 height line

Johnson Controls 02/1994–05/1995

Senior Automotive Body Designer (Contract-Team Resources)

Engineering and Design of automotive seating

Class A surface development (CGS)

Engineering and Design of automotive seating mechanisms, framework and restraints

FMC 07/1992–02/1994

Senior Automotive Body Designer (Contract-Masco Tech Inc.)

Engineering and Design of interior trim, instrument panels and consoles

Class A surface development (PDGS)

Engineering and Design of electrical wiring routing and connectors

Engineering and Design of vibration dampeners and insulators

General Motors 01/1990–07/1992

Senior Automotive Body Designer (Contract-Hawtal Whiting Inc.)

Engineering and Design of body and structure

Engineering and Design of glass, exterior trim and wheels

Class A surface development (CGS)

Engineering and Design of fasteners and hardware

Modern Engineering 07/1986–01/1990

Senior Automotive Body Designer (Contract-Modern Engineering Service Co.)

Worked class A surface development at GM Design Staff

Engineering and Design of body and structures

Engineering and Design of fasteners and hardware

Engineering and Design of interior and exterior trim and wheels

Worked as a CGS instructor in computer aided design and data management

Interior and exterior door design with impact bars, glass drop and mechanisms (tracks and rails)

Education:

Lawrence Technological University School of Architecture – Junior Status

Philpot School of Automotive Body Design, Madison Hts. MI-1985–1986

Auto-Body Drafting and Design: Graduated with honors.



Contact this candidate