Francis Bravo Ocang

CAREER OBJECTIVE:

To work in a company where intellectual, professional and personal growth is attained.

To excel in a position that will done and bring out my talents to the fullest and to contribute significantly to a company that shall provide me unlimited opportunity for career growth.

WORK EXPERIENCES:

Position: Maintenance Equipment Engineer 2

October 6, 2015 - present

Process Area: Assembly/Front of line/ Wire Bonding

Amkor Technology Philippines

#119 North Science Avenue, Laguna Techno park Inc., LTAI, Binan, Laguna

JOB SUMMARY:

Supervises and ensures implementation of quality and quick maintenance program for all the equipment/machines at wire bonding process.

Machine Handled: KNS (ICONN, PROCu/PROCuPlus, MAXUM/MaxumPlus, Dadge Ball Shear/wre pull machine

DUTIES AND RESPONSIBILITIES:

Maintenance Shift Engineer.

Manufacturing Process Enhancement.

Review weekly maintenance schedule.

Review and assign work to maintenance employees.

Develop and execute training plan for maintenance workers.

Promote communication as well as good relations between the production and the maintenance departments.

Ensure housekeeping, productivity, and quality of work standards are maintained, most especially within the mechanical maintenance department.

Handle internal focus audit.

Assist Process Engineers in defining solution to problematic devices prone to reject such as lifted metal, LBOP / LBOL, shear and tensile strength failure.

Optimized machine parameters to increase UPH with respect to production quality.

Responsible for supporting manufacturing through restoration of hard down equipment at PBGA / SBGA / sCSP and MLF FOL such as wire bonders (KnS 8028/PPS, KnS Maxum Ultra & KnS ICONN / KNS ICONN PLUS).

Provides Equipment Failure Analysis reports for hard down equipment with target uptime utilization.

Design cost saving projects to enhance and improve production and quality output of equipment, especially at wire bond.

Coordinates with manufacturing and process groups on implementing various activities.

Perform Front-of-Line sustaining activities and major repair at wire bond station for machine set-up/conversion, parameter optimization and give necessary corrective actions on machine problem to eliminate downtime promoting higher utilization of all the equipment.

Extend repair capabilities on other stations at Front-of-Line such as Vision Plasma, Dage 2400/4000Series, Hizomet, Genesem 2D map etc. to gain and develop more skills.

Support Energy conservation program and implementation.

PROJECTS/ACCOMPLISHMENTS:

Recovery of 15 gripper puller stepper motor (KnS 8028), cost savings.

Cleaning of X, Y Z Encoder and Replacement

Recovery of 17 Indexer gripper step motor (KnS 8028), cost savings.

Recovery of 10vertical / oblique illuminator assy. (KnS 8028), cost savings.

Modified output wall sensor of KnS 8028/PPS, KnS ICONN.

Modification of x-registration sensor position of KnS 8028/PPS.

Modification of elevator covers spring (KnS 8028/PPS).

Puller motor stopper of KnS 8028/PPS.

Baseline Esec 3008 workholder.

Rebuild of KnS 1488 model.

A1 condition of wire bond machines (KnS, Maxum, ICONN and ICONN PLUS).

ACHIEVEMENTS

Technical innovation awarded for WB FMRS (Fumes and Foreign Material Removal System) (Team)

Technical innovation awarded for KNS8028 dual bond (TEAM).

Extra mile awarded of PB/SB/MLF FOL IDL personnel.

TPM awarded for PBGA MTTS improvement certified (TEAM).

Position: Wire Bond Equipment Maintenance Engineer

May 17, 2013- May 17, 2015

Process Area: Assembly/Front of line/ Wire Bonding

Advanced Semiconductor Engineering Chungli branch (ASE-CL)

#500 Chung Hua Road, Chung-li City, Taoyuan County 320 Taiwan, R.O.C.

JOB SUMMARY:

Develops and ensures implementation of parameter adjustments/experimentations/maintenance program for all the equipment/machines in the wire bonding process.

Machine Handled: KNS (ICONN, PROCu/PROCuPlus, and MAXUM/MaxumPlus), Jason Plasma machine, Ball Shear/wre pull machine

DUTIES AND RESPONSIBILITIES:

200 Wire bond machine maintenance/line sustenance (SCSP, PBGA and QFN line).

Ensures 5S practice as daily routine every start and end of the shift.

Evaluates downtime information to form appropriate plans and countermeasures in order to maximize machine efficiency without sacrificing quality.

Investigates/Solve process quality issues.

Responsible in handling major and minor breakdown maintenance.

Performs machine set-up.

Solid front Line Assembly (Wire Bonding) Preventive Maintenance/Line Sustaining personnel.

Performs machine troubleshooting and corrective maintenance.

Support production as needed concerning machine problems/troubles.

Performs machine calibrations.

Trains newly hired maintenance personnel at PBGA /PQFN wire bonding process.

Complies with SOP, ESD, and ISO/QS standards.

Position: Wire bond Equipment Maintenance Engineer

March 2005- March 2013

Process Area: Front of Line WIRE BONDING PROCESS

ON Semiconductor Manufacturing Philippines Corporation (Formerly SANYO)

Luisita Industrial Park, San Miguel, Tarlac

JOB SUMMARY:

Develops and ensures implementation of preventive maintenance program, product experimentations and improvements for all the equipment/machines at wire bonding process.

Machines Handled: KNS (ICONN,MAXUM/MaxumPlus), SHINKAWA (UTC-50/100/200/240/300/345/400/200/1000), DIAS INSPECTION MACHINE, KNS Orthodyne Aluminum Wedge Bonder. DadgeBallshear/wire pull machine

DUTIES AND RESPONSIBILITIES:

Responsible in new machine evaluation for production certification/authorization and improvements.

End shift reporting.

Performs machine parameter adjustments and experimentation at wire bond process.

Formulates/revise work instructions, procedures and engineering change notice at wire bond/ball attach process.

Standardization and parameter tolerancing at SHINKAWA and KNS model machines.

Performs machine set-up and authorization on new machines, new package type and new materials.

Implementation of countermeasures regarding on defects for the elimination of abnormalities.

Evaluate and qualify new machines and new product.

Assuming responsibility for risk assessment including hazard and operational studies for the health and safety of both company staff and company.

Coordinates with quality engineer and production coordinator to evaluate all costumer issues and respond accurately and concisely.

Evaluates downtime information to form appropriate plans and countermeasures in order to maximize machine efficiency without sacrificing quality.

Coordinates with the quality and production staff always specially when some abnormality happened on the line and discuss the root cause and possible effective countermeasure on it.

Investigates and analyze process failures through systematic approach using statistical tools.

Performs machine improvements, quality improvements and process improvements/innovations.

Ensures machine good running condition.

Ensures compliance to ESD, ISO/QS Standards, 5S, Safety and Standard Operating Procedures (SOP).

Performs measurements/validation and parameter tolerancing/standardization of machine parameters. (ORTHODYNE MACHINES)

Hands on training in preventive maintenance of wedge bonder machines.

Train newly hired maintenance staff on actual troubleshooting and repair at wire bond machines. (copper and gold wire)

Responsible in maintaining high machine performance (copper and gold wire)

In charge of task force reduction of maintenance recall at wire bonding process

Responsible in wire bond machine restoration and preventive maintenance. (copper and gold wire)

Investigates and solves abnormalities at the wire bonding production line.

Plans and contributes suggestions regarding innovations and improving efficiency of machines and cost reduction program.

Responsible on task force machine focus improvement.

Position: Improvements/Suggestions (Kaizen) Coordinator/Implementer

Process Area: Assembly Manufacturing /Front of Line/ Wire Bonding

ON Semiconductor Manufacturing Philippines Corporation (Formerly SANYO)

Luisita Industrial Park, San Miguel, Tarlac

DUTIES AND RESPONSIBILITIES:

Evaluates process design weakness especially on machines for upgrade and innovation.

Formulate/evaluates personnel’s suggestions.

Design/implement and validate feasible suggestions.

Creates machine and process improvements (relay out/rearrangement)

Organize small group activities

Ensures 100% coordination of each personnel to have feasible suggestion.

Position: Assistant Wire Bond Engineer (On the Job Training Assembly Development Team)

September 2004- March 2005

Process Area: Assembly/Front of Line/WIRE BONDING

ON Semiconductor Manufacturing Philippines Corporation (formerly SANYO)

Luisita Industrial Park, San Miguel, Tarlac

DUTIES AND RESPONSIBILITIES

Troubleshooting and repair of board drivers for cost reduction.

Performs wire bond machine overhauling and restorations.

Responsible in handling the machine/equipment maintenance in Wire bonding process.

Responsible for machine efficiency monitoring.

Ensures that machines functions normally.

Perform Preventive Maintenance and Corrective action implementation.

Daily data gathering on machine errors at Wire bonding process.

Position: SERVICE CREW

November 2000 to April 2001

Process Area: Dining Station

Jollibee Foods Corporation Plaza

San Fernando City, La Union

Duties and Responsibilities:

Welcome and greet the guest with smile and applying the sequence of good service at all times.

Offering tables to customers for them to occupy.

Speaking clearly when repeating orders.

Maintaining hygienic procedures as per hazard analysis contamination control point is concerned.

Ensures dining tables available and clean at all times.

Set-up tables in accordance with the established standards.

Responsible in service at assigned station at all times.

Pick-up orders from the kitchen and service to the guest/costumers.

Preparing check/bill, serve to guest/costumers, thanking and goodbye at the same time.

Maintaining cleanliness and orderliness of the working area for safe purposes.

Providing costumers delight and satisfaction at all times.

EDUCATION ATTAINMENT:

Don Mariano Marcos Memorial State University

Bachelor of Science in Industrial Technology Major in Electrical Technology

S.Y.: 1997 –2005

Magungunay National High School

Secondary Level

S.Y.:1992 – 1996

Magungunay Elementary School

Primary Level

S.Y.: 1987 –1992

STRENGTHS & SPECIAL SKILLS:

Organized, people- oriented, diligent, resourceful, responsible, leadership, easily motivated and has the willingness to learn and grow.

Hard down and minor maintenance Troubleshooting and repair skills.

Innovative thinking and has a CAN-DO attitude.

Wire bonding equipment maintenance, set up, and parameter experimentation expertise.

Knowledgeable in MS Office Applications.

Has knowledge in Work Measurement, Production/Operations Management, Quality Control on front of line assembly of semiconductor products specially in Wire Bonding Process

Has basic knowledge in SPC tools, FMEA, Poka yoke, and TPM.

Lead forming machines operation/troubleshooting.

Able to read and illustrate electrical schematic diagrams.

Troubleshooting machine Electronics, Pneumatics, Motors, Sensors, board drivers and Electrical connections.

Electrical/electronic appliances troubleshooting/repair.

Has knowledge in electrical house/building wiring installation/troubleshooting.

PCB design itching and parts placement.

Audio amplifier assembly/upgrade and repair.

Can work under pressure and with minimum supervision.

SEIMENS PLC knowledge.

Has knowledge and techniques on how to deal/provide service on different people or costumer.

SEMINARS ATTENDED:

Echo Seminar on Poka Yoke (Mistake Proofing)

Basic Statistical Process Control

Pneumatics Seminar

Total Productive Maintenance - Autonomous Maintenance

Total Productive Maintenance - Planned Maintenance

Failure Mode and Effect Analysis

Bolts and Nuts

PERSONAL BACKGROUND:

Birthday : June 07, 1979 Passport number: EC6959551

Birthplace: Naguilian, La Union Date of expiry: February 28, 2021

Marital status: Married

Height : 168cm

Weight : 67 kls.

Language: English, Filipino / Tagalog, Ilocano, Pangasinense, Chinese

Hobbies and Interests: Playing table tennis, darts and guitar, watching movies, listening to music, dancing, reading project enthusiasts, assembly/troubleshooting electronic/electrical gadgets/appliances.

CHARACTER REFERENCES:

Engr. Manuel Lacuata

Assistant Manager – ON Semiconductor Manufacturing Philippines Corporation (formerly SANYO)

Luisita Industrial Park, San Miguel, Tarlac

Contact Number: +639*********

Engr. Julius Rodriguez

Test Engineer – Advance Semiconductor Engineering Chungli Branch

500 Chung Hua Road, Chung-li City, Taoyuan County, Taiwan, R. O. C.

Contact Number: +886*********

Engr. Herbert R. Bato

Maintenance Engineer (wire bonding) – Sandisk Storage Malaysia

Contact Number: +011********

Engr. Reggie Guarico

Maintenance Engineer (wire bonding) – Amkor Technology Philippines

Laguna Techno Park Industries, Binan, Laguna

Contact Number: +639*********

Contact this candidate