Felix Perez Jr.
aczade@r.postjobfree.com
Bachelor of Science in Mechanical Engineering
SUMMARY OF EXPERIENCE
Twenty (20) years of extensive experience in piping design and PDS coordination detailing and delivering solutions for LNG projects, FPSO projects, power generation, Petro-chemical refineries, chemical, and water treatment plant projects. Broad based responsibilities in piping, structural, and mechanical facilities with experience in front-end engineering equipment design (FEED); manufacturing, engineering, procurement and construction (EPC) activities. Comprehensive knowledge of design standards and codes. Strong leadership and decision making abilities coupled with diverse domestic and international experience. Proven track record of achieving all project objectives and demonstrated ability to operate effectively in all environments. Expert technical knowledge in understanding and interpreting concepts of 3D design, modeling, and coordinating. Customer focused, resourceful and effective in high stress environment.
SOFTWARE PROFICIENCY
SP3D, PDS, PDMS, SmartPlant Review, FlexCad, Tekla Structures, TriForma, 2D & 3D MicroStation, AutoCad, PlantSpace Design, LFM laser scan, MARIAN-Intergraph, Piping Isometric Administration System, Microsoft office (Excel, Word).
WORK EXPERIENCE
Senior Piping Designer August 2011 – October 2016
Technip USA – Houston TX
Projects: Sasol Low Density Polyethylene Project – Lake Charles, LA USA
Horizon Liquid Extraction Plant – Canada
Ethane Feed Flexibility Project – Port Arthur, TX USA
Demethanizer Tower Replacement Project – Port Arthur, TX USA
Elite MPU Project – Baytown, TX USA
ROF De-Ethanizer Project – Alberta, Canada
Job Description:
Responsible for the 3D modeling of equipment, structural and piping arrangement using SP3D, PDS and LFM laser scanning application.
Responsible for the piping arrangement of steam traced and jacketed piping around molten additives area.
Performed isometric extraction for construction issue.
Performed quality check of isometrics between LDT and P&ID’s.
Responsible for nozzle and platform orientation/elevation design of the demethanizer tower.
Responsible for the piping arrangement and pipe support design and modeling of the cryogenic piping around the demethanizer tower.
Created stress isometric drawings with suggested pipe support location and provided to stress engineers for analysis.
Planned, facilitated and conducted 3D model design review presentation to clients and vendors and addressed technical issues.
Provided on-site field assistance as required per project assignment.
Performed difficult and complex design calculations.
Provided information for inter-discipline coordination.
Participated in project coordination and client meetings.
Senior Piping Designer (Contract) August 2010 – August 2011
CB&I – Houston TX
Projects: Cartagena Refinery Expansion Project – Colombia
Job Description:
Performed interference checking of piping, steel and foundation before issuance of construction drawings.
Performed 3D modeling of U/G piping, roads and civil works.
Calculates the center of gravity of pipes using PDS to be used for modular steel data.
Performed volume calculation of dikes around tanks farms using MicroStation for civil information.
Senior Piping Designer (Contract) September 2008 – January 2009
Bechtel Corp. – Houston TX
Projects: Angola LNG Project – Soyo, Angola
Brass LNG Project – Brass, Nigeria
Job Description:
Responsible for piping 3D modeling of Jetty area using PDS application.
Performed interference checking of piping system.
Performed the piping Material Take Off
Revised plot plan drawings using MicroStation.
Revised U/G piping layout based on the new P&ID.
Senior Piping Designer (Contract) August 2006 – August 2008
CB&I – Houston TX
Projects: Essar Oil Refinery Delayed Coker Project – Vadinar, India
Shenhua Baotou Coal to Olefins Project – China
Paradip Project; CPC Project; Rosnef Project
Shell BDX Project – Singapore; Mellitah As-built Project
Job Description:
Responsible for the 3D modeling of equipment and piping arrangement around Coke drum area from conceptual to detail using PDMS application.
Checked vendor drawings and made comments as necessary.
Extracted stress isometric drawings and coordinated with stress engineers for critical isos.
Coordinated with U/G group for firewater system lay-out and monitor/hose reel locations.
Prepared piping plan lay-out for multi-projects using AutoCad and FlexCad application.
Revised As-built drawings using MicroStation.
Assisted Mechanical department in equipment drawing production for Shell BDX project using AutoCad.
Modeled structural steel and civil works using PDMS 3D modeling for piping conceptual layout.
Plan drawing and isometric extraction.
Senior Piping Designer/PDS Coordinator September 2003 – August 2006
ABB Lummus
Projects: Devon-Polvo FPSO Project – Campos Basin, Brazil
Statoil Volve Field Development – North Sea, Norway
Molikpaq Tie-in Project – Sakhalin Island, Russia; Mellitah Gas Project
Job Description:
Responsible for piping and equipment lay-out using PDMS application.
Evaluated vendor equipment data and provided piping information to different disciplines.
Checked integrity of the isometrics and run the clash report before isometrics are produced.
Responsible for the production of isometrics and ensure that every milestone was met.
Controlled the flow of isometrics using the Piping Isometric Administration System (PIAS) application and ensure the consistency of isometrics being added in PIAS against the 3D model.
Controlled the MTO using Intergraph’s MARIAN application.
Responsible for PDS database and isometrics coordination between ABB Lummus Netherlands and ABB Lummus Singapore.
Assisted PDS designers in troubleshooting of modeling errors.
Piping Designer/PDS Coordinator May 2002 – August 2003
CadSkills Pte Ltd – Singapore
Projects: Changi Water Reclamation Plant – Singapore
Job Description:
MicroStation Triforma project database administration.
Responsible for the piping 3D modeling using PlantSpace design series and for the isometric extraction and production of construction drawings.
Created clash reports and JSM files used for model review.
PDS Coordinator August 2001 – May 2002
Fluor Daniel, Inc.
Projects: BP Clean Fuels Project – Houston TX, USA
Ultramar Golden Eagle Project – Aliso Viejo, USA
Chevron Project
Job Description:
Project setup including the development and creation of project directory structure, databases, seed files, cell libraries and drawing borders.
Responsible for the automation of project daily archival and weekly clash report.
PCD development.
Piping Designer/PDS Coordinator June 1996 – July 2001
JGC Philippines
Projects: MLNG Tiga – Malaysia; Hawiyah Gas Project – Saudi Arabia
Ras Laffan Project – Doha, Qatar
Beri Gas Project – Saudi Arabia
SSC Plant – Jurong, Singapore
Job Description:
Supervised colleagues in PDS piping, equipment, and structural 3D modeling.
Smart Plant design review generation and manipulation.
Responsible for all isometric and plan drawing extraction.
Conducted In-house training on PDS 3D piping/equipment modeling, Frameworks Plus, and electrical raceways to piping designers and other disciplines.
PDS administration and system maintenance task.
Generation of Refence Data Conflict Report.
Inputs design through AutoCAD 2D-DB and CAD PIPE.
MTO Preparation.
Prepare progress report.