Mechanical Technical Support

Hernan T. Quiles

*** ******** ****** ● MA *****

508-***-**** ● *********@*******.***

CERTIFICATIONS

ISO 13485:2003, ISO 9000, 9001, OSHA, ESD, Pneumatics, Laser Aperture,

Forklift & Electric Pallet Jack

PerkinElmer LST, Hopkinton, MA 08/12 – 02/17

Electrical/Mechanical Tech

Assembly of multiples medical devices. Inspect all incoming parts, PCBs, MAC, MFD,and CPU boards, parts, frames. Build using procedures/documents, per each assembly. Calipers, micrometers, feeler gages & torques used when needed to specifications. Oracle, SAP, software use. Build procedure at hand. Also supported & assisted our cleanroom lab. Chips build, sterilization and glue line support. All warehouse parts moved by forklift and/or electric pallet jack.

YRC Freight, Shrewsbury, MA Evenings (Part-time) 04/16 – 09/16

Forklift/Docker

Con-Way Freight, Shrewsbury, MA Co/Randstad (Part-time) 02/13 - 10/13

Forklift/Dockworker

Scanning & receiving all incoming items. Weigh on pallets, skids, drums, and/or other in trailers, by aide of forklift, pallet jack or dolly. Weigh in, scan and redirect to Inspection area if required or outgoing trailers. Checking all documents to items, then proceed with loading up trailers.

Dover/Danaher Motions, Westboro, MA Co/Micro Tech Staffing 08/11 – 05/12

Electro/Mechanical Tech

Building of various Semi-Conductor machines, off granite surface. Precision laser surface measurements on

X, Y, Z axis. Theta drives. Multi motors, and magna tracks. Wiring, and diagnostic testing. Multiple test and

Inspections after certain sub-assemblies. Pull & transact parts. Via network, of forklift/pallet jack

Waters Corporation, Milford, MA Co/Davis Company 02/11 – 07/11

Speacialist

Working in a clean room environment and assembled in an ESD area

Assembling several different types of sub assemblies; XYZ arms, carriages, theta drives, RTZ builds, needle washers and bottom plates. Test ribbon cables and fiber optics when applicable on special units

Troubleshooting to component level, System testing before and after assembly. Utilization of wire harness & torque within specifications, updating procedures with the engineering department. Inventory control (carbon system), Wet testing with wash blocks using methanol. Traceability control, WIP, SIP and other manufacturing procedure GMOP, SOP as required.

G.E. Health CARE/BIO Life Science Division, Westborough, MA Co/Addeco 01/10 – 01/11

Bio-Cell bag Technician

Assembling various disposable bio-reactor cell bags; cell bags from 2 liter through 100-liter bags including port and bar sealing, Master leak testing. Sub-assemblies, labeling of cell bags, produced and printed labels for cell bags. Flash cutting, R.T.P.; used various instruments and worked within special limitations and spec pre Inspection and Inspection. Verifying B.O.M.’s and pick list, Inventory and quality control, BMOP’s, SIP’s, SOP’s, WIP’s, housekeeping. Outside the cleanroom, assist in filtration & purification department. Building up filters and tests.

Coughlin Companies, Inc., Worcester, MA 05/06 – 04/09

Columbia Tech/DCI Engineering/Cogmedix

R&D/E&M Technician

Building sub assemblies; large and small. Constructing panels and frames; mechanical and large builds including EDT, GSI, Morella, Samsung, Universal (medical related division with the Cogmedix), Eleme medical(Smooth Shape) running fiber optics for use with a laser application. Test fiber optics before and after installation. Run diagnostic system test on laser aperture device. BIO BDX requiring schematics. Reading blue prints, operation guides, electrical, pneumatic, pipe fitting and mechanical build. Using various tooling for specs; caliper, micrometer, torque wrenches, and feeler gauges, troubleshooting, testing, working with mechanical, hardware and design engineers cap Register and board working. Cabling, harnessing, wiring of multiple hardware. Assisting with Standard Operating Procedures for prototypes before going into Build of Materials (B.O.M.’s)

Telic/Lucent Technologies, Marlboro, MA 03/00 – 02/06

Operations Technician

ESD ISO 9000, 9001, Oracle, Microsoft Excel and Point Man software experience

Manufacturing operations support through schematics and blue print reading. Electro-mechanical assembly on modules and chassis, HVAC, plumbing, electrical as needed, Q&C, assisting hardware engineers, supporting special projects with custom product assemblies, electro-mechanical experiments. Configuring upgrades on ECO programs etc, lab installations of various hardware, chassis (Plexus 9000), patch panels, power supplies, Cisco and IBM systems 6, 18, 24 port panels, modules, crimping, fiber optics and cabling, fan tray upgrades, ESD grounding (straps, operation tables and mates).Supporting facilities team, general maintenance, mechanical and contracting, constant communication with hardware and software, operations and technical support teams

Quantum/MKQC Components, Shrewsbury, MA 10/95 – 01/00

Fab Operator/Key Trainer

CLEAN ROOM – 100:

Semiconductors, processing magnetic thin film heads through various steps in the photolithography testing and planting areas using the different types of machinery and test equipment for electromagnetic heads; Micralign 600HT, MR measurement systems, Nanospec/AFT Model 210. Running qualifications of different pieces of equipment, Q&C and inspections. Training and tracking use of comet tracking systems, perform different procedures for the inductance of the thin film heads. As key trainer, taking the task as Cell Leader when required

EDUCATION:

Doherty Memorial High 08/82 – 05/85

Worcester, MA

Diploma

SALTER COLLEGE 04/09 – 2/10

West Boylston, MA

Certified Computerized Accountant

*FLUENT IN ENGLISH AND SPANISH*

Contact this candidate