Tracy Saunders
Troy, OH *5373
Cell: 937-***-****
E-Mail: acz2ml@r.postjobfree.com
Summary
I have more than 15 years’ experience in machine/building maintenance. I have been trained in
all aspects of machine/building maintenance installation trouble shooting and repair. Electrical,
mechanical, hydraulic, and pneumatic installation/trouble shooting and repair. I am a highly
motivated self-starter always eager to learn new things. I take a lot of pride in my work and
encourage others to do so too.
Highlights
trouble shooting electrical/mechanical failures
understanding processes
my electrical skills are equal to my mechanical skills
metal fabrication and welding
re-designing machine components to prevent failures
Accomplishments
I pride myself in being a well-rounded maintenance technician.
Taking on large projects such as compressed air reduction, energy savings lighting/electric
motors, setting up lock out tag out written procedures.
Experience
February 2015 to present
Abbott Laboratories Tipp City, Ohio
Multi-Craft Mechanic
Primary focus is to support Production Processing, Filling, and Packaging with electrical and
mechanical trouble shooting and helping with process issues. 24v to 480v trouble shooting,
mechanical trouble shooting, pneumatic and hydraulic troubling shooting. Allen Bradley Is the
dominate electrical controls and drives in the plant trouble shooting ac drives servo drives and
electrical devices via multi meter, remote I/O and HMI. Rebuilding pumps and valves.
Replacing various different sizes of motors and gearboxes. Secondary responsibilities is to
perform PM work orders right DM work orders to remove parts from stock
November 2014 to February 2015
Navistar Springfield, Ohio
Maintenance Electrician
Primary Job was to support other trades with electrical aspects of paint plant equipment, 24vdc to
480vac electrical installation trouble shooting and repair, forward and reversing motor starters,
pumps fans conveyor motors, emersion lifts, gas fired ovens, ABB Robotic paint booths,
electrical pms, installation and demolition of electrical conduits and fixtures, overhead doors and
dock plates, facility lighting, automated pallet racking system trouble shooting and bit
modification of PLC 2,3,AND 5.
January 2013 to November 2014
Creative Extruded Products Tipp City, Ohio
Maintenance Technician
Trouble shoot/replace/install Allen Bradley PLC Micros and SLC Make program adjustments per
process/engineering request.
Trouble shoot/replace/install various types of AC/DC drives replace DC drives with equivalent
AC drives.
Power Flex, Yaskawa, Reliance Flex Pak/Max Pak. trouble shoot/install/replace servo
motors/drives Baldor, Allen Bradly.
Trouble shoot/install replaces various types of switches proximity, limits, laser eyes, retro
reflective, and fiber optics.
Trouble shoot/install/replace various types of relays, timers, motor starters, circuit boards temp
controllers, pressure transducers/controllers, counters.
Work with various types of conveyors, replace heaters, rebuild gear boxes bearings/seals/shafts,
and rebuild pneumatic cylinders/valves.
Do work orders and perform preventive maintenance. Take care of facility compressors/water
pumps/ lighting/ bus/transformers/breaker panels.
All aspects of maintenance safety and trouble shooting.
August 2006 to December 2012
Ring Container Technologies Sidney, Ohio
Maintenance Technician
Installed and program flex-pack drives, soft starts, and various other types of drives.
Work with chain conveyers, stretch wrapping machines, and automatic banders.
Relay logic troubleshooting 12DC, 24VAC/DC, 110VAC.
Can read both relay logic schematics and ladder logic schematics.
Troubleshooting direct drive gear units and belt driven gear units.
Work with Beckof HMI and PLC.
Work with contractors on solid-state relays, timers, motor starters, soft starts, and drives.
Motoman Robotics Installing new production equipment and removal of the old machines.
Electrical and pneumatic drops.
Siemens controllers and HMI experience.
PLC Troubleshooting inputs/outputs for Allen Bradley, Direct Logix, Allen Bradley 5000.
Retro reflective eyes, limit switches Work with hydraulic servo valves and pumps: Rexroth,
Bosch.
Electrical servos and drives Rexroth and Bosch.
3 phase motors and heater circuits.
Power flex drives and ABB drives.
Single phase motors and circuits.
Pneumatic/Hydraulic cylinders valves.
Gearbox rebuilds
.
May 2001 to August 2006
Advanced Composites Sidney, Ohio
Maintenance Technician
Troubleshooting of production lines, ac motors, and gear drive units up to 1200HP.
DC motors and gear drives units up to 600HP.
AC voltage 24, 120, 208, 480, 4360.
Both relay logic and ladder logic troubleshooting.
Worked with Japanese relay logic control panels from the early 1980's.
Replaced most of these controls with micros 1200.
Installing pipe, conduits, for new machines, retro-fitting new equipment to old machines.
Fabrication: welding stick and MIG, pipe flat steel, stainless steel, aluminum pipe.
Preventative maintenance on equipment.
Load cells, psi transducers.
Rebuilt pumps and motors.
Troubleshooting and installing various ac/dc drives and circuits.
Motor alignment +- .003 on torque limiting couplings motors from 100HP (AC) to 1200HP
(AC).
Cooling tower and chiller maintenance: Replacing, cooling, media, cleaning, condenser.
Chemical treatment of cooling tower water.
Assist production and R&D with machine problems.
Rebuilding 3 stage and single stage extruder Gearboxes 6,000lb+
October 1999 to October 2000
Navistar International Springfield, Ohio
Assembly
Assembled truck axles, brakes, and hubs.
August 1996 to October 1999
Technical Resources Group Jackson Center, Ohio
Maintenance Technician
Cooling tower water treatment and testing water softener treatment and testing.
Facility lighting.
Change filters/belts on HVAC.
Assist with compressor maintenance, ground maintenance, roof maintenance, water pumps, and
motors.
Tools & Testers All hand tools: power and manual.
Torque wrenches Calipers, depth gauges, digital millimeters, amp clamps.
Manual lathes/mills.
Ultrasonic leak detectors and vibration detectors.
Forklift, boom lift, and scissor lift.
Reading schematics.
Using motor coupling alignment kits with analog gauges.
Using laser alignment for belts.
Fluke pressure calibrator, fluke temp/thermocouple calibrator, fluke process calibrator with 24v
loop output.
Scope to watch firing of SCR's in DC Drives also to monitor output voltage amperage at the
same time.
Education
1995 Graham High School St .Paris, OH
GED General
Edison Community College Piqua, OH
Began an ass. in electrical engineering never completed
Upper valley JVS Piqua, OH
Took PLC 1 & 2
Sinclair Dayton, OH
Electrical wiring and PLC
Drawing/wiring circuits and drawing/writing ladder logic