Manager Engineer
Resume:
Philip Jackson Jr
Great Falls, SC 29055
Cell 803-***-****
E-mail *********@*****.***
Career Objective
To secure employment using the following areas of experience
Welding, certified in all welding procedures and medals
Maintenance Mechanic, and Supervisor over all rolling stock and industrial, heavy equipment
Supervision, Manufacturing all areas, Assembly, Quality Control, Welding, Mechanics Inspection to include all areas of Non Destructive Testing
Lean Manufacturing Practices
Powder Coating Paint
Certified Miller welding machine Repairman
Stamping
Fabrication, structural steel, pipe assemblies, fuel and air tanks
Machine shop, lathe and milling machines, drill press
PLC repair
Millwright setup, pumps, generators
Heavy equipment operator, to include crane operation, rubber tire or track
Hydraulic &Pneumatic rebuilding
For 22 years I supervised and trained Army Non Comissioned Officers on fundamentals of daily Vehicle maintenance and Operator Maintenance. I have been deployed 4 times
for training in different areas of the continent.
July 10 2015 to present
Jackson welding services
Perform Machanist,fabrication, machine repair, and millwright functions. Head of Preventave Maintenance Program. Machined parts and applied
parts to machines. Fabricated plastic parts in lathe, milling machine to specification measurements.Also performed maintenance on vacuum machines.
Assisted in parts stocking. Worked with vendors on tactical machine repair.
June 10 2014 to July 9 2015
Carolina Adventure World
Maintenance/Shop Manager over complete park operations to include performing all maintenance on 56 rental units and 15 earth moving equilpment.
perform daily operations over shop functions and scheduled services. Ordered repair parts and maintain inventory for rental equilpment.
Assist in customer relations to every day operation.
June 26 2013 to June 6 2015
CTR of the Carolinas
Perform welding repairs and refurbish of cryogenic tanks for the gas industries.
Welding and fabrication functions on a daily schedule. Perforn all aspects of sheetmetal functions. Operation of Linkbelt crane and heavy forklift operations daily.
Work with supervisor on a constant daily operation to acheve daily shipping requirements.
Assist engineering on drawing revisions to meet schedule and shipping requirements.
Assigned to purge each tank with nitrogen to assure no other gasses present to assure safety.
July 28 2008 to May 30 2013
Spirax/Sarco Inc. Blythewood, SC
Fabrication Team Leader for Spirax/Sarco
Shop Fabrication Supervisor in fabricating steam pump units for the use in separating steam and water. I am currently and have been ASME sect 9 welder qualified. Carbon, Stainless in all areas, SMAW, GTAW,
FCAW, MIG. I am also shop welding inspector, and materials manager in charge of making material orders.
All systems are hydrostatic tested and documented by myself.
I am in charge of writing shop welding procedures and implementing welding tests.
All tests are submitted to AWS CWI compatible for bend tests and certification.
Tasked with forklift training and certification training
In charge in keeping and update revisions in drawings and document control, welding qualifications,
And welding wire usage per employee.
re-established in a new facility
Interact with engineers in cost cutting and development
CHESTER WOOD PRODUCTS, CHESTER, SC. 10/05
MILLWRIGHT
Performing duties as a mechanic,millwright, duties include setting new equipment, responding to on the spot maintenance calls.
Performing overall maintenance on sawmill, green end area, driers, glue spray line, hot press and saw areas.
Rebuild hydraulic cylinders, replace chains, belts, and perform on the spot repairs on rolling stock. Make necessary welding repairs, and set equipment with crane.
Perform welding repairs on equipment and fabricate assemblies per drawings.
Also fabricate pipe and steel using own ideas and experience. All maintenance areas
were covered using precise judgments. I performed shop functions 0n the lathe and Bridgeport and also on long arm drill press.
INDUSTRIAL PIPEING INCORPORATED. CHARLOTTE, NC. Performed as a QC Inspector under ASME guidelines. Pneumatic bubble testing, liquid penne rant testing, and ultrasonic testing per
ANSI code requirements, B31.1 to B31.6 Vertified documents for customer and addressed any problems with engineering and supervision
Qualified in QS9000 procedures.
FUEL SYSTEMS LLC, CHESTER, SC. 5/00to1/05
Production Supervisor/ Manager / and Maintenance Supervisor for metals manufacturing plant providing fuel and air tanks for the heavy-duty truck industry. Supervise and Manager of 150 welding and fabrication, and maintenance employees for production of tanks, within a unionized facility. Chester facility has was closed and I was transferred to our sister plant in Charlotte NC. Performed fabrication, machine shop and maintenance on automation machinery in a focus factory atmosphere. Later was appointed facilator over implementation of Lean Manu faction Tactics.
Jackson Welding Great Falls, SC 29055 1998 to 5/00
Fabricate and weld customer-requested projects. Perform maintenance on equipment for manufacturing companies.This was a self owned operation.
Sunbeam Outdoor Products Waynesboro, GA 30830 1991 to 1998
Supervisor / Manager responsible for 90 employees in three production areas:
Welding Supervisor responsible for:
Employee training on production items
Maintain and enforce production requirements for welding schedules
Assist engineering in introduction of Lean Manufacturing Practices
Train welders on drawings, measurements, and set-up fixtures.
Maintain and report daily production
Provide and maintain a safe working environment.
Enforce cycle counts for inventory
Set up and expedite maintenance schedule on all area equipment.
Fabrication Supervisor responsible for:
Produce quality parts for welding department using Lean Tactics
Train employees on proper operation of machines and equipment
Maintain Inventory on all parts for production use
Maintain and report production
Set up bending machines and check accurate
Paint Line Supervisor responsible for:
Production of painted parts for all production areas using Power Coating System
Maintain daily logs on water consumption and PH levels. Prepare documents for city water sewage transfer
I was also a facilator for tube mill changeover, Lean Practices
Georgia Army National Guard 1986 to 1991
Maintenance Shop Supervisor responsible for;
Inspect and repair equipment for leaks on fuel, brake and hydraulic systems; electrical problems; and body and frame defects
Operate and diagnose problems with machinery
Welding repairs inspected and accepted or rejected by assistant supervisor
Served as Motor Sergeant for Engineering Unit Co. B 878th Engineering
With a total of 30 mechanics under my command
Pullman Power Products Waynesboro, GA 1981 to 1986
Area Lead Inspector and Welding Training responsible for:
General welding inspection, fit up, visual of cleanliness and material identification, welder qualification
Inspection using guidelines of Nuclear Regulatory Commission Level II ANSI N45.2.6
Welding of pipe and all boilerplate, including all thicknesses of stainless pipe and black iron pipe using tig welding, stick welding and diametric welding before I wwas permoted to Inspector.
Dravo and Groves Elberton, GA 1980 to 1981
Welding Foreman and Trainer responsible for:
Welding on all steel fabrication of I beams for Gantry cranes. Certified by Army Corps of Engineers for specific job of welding floodgates and support brackets.
Performed rigging and connecting jobs.
Conducted weld inspections on all welding at end of job
Certified Welding Inspector with Army Corps of Engineers
Operated track torches and approved fabrication of materials
Daniel Construction Company Greenwood, SC 1974to 1980
Welder/Supervisor responsible for:
Quality welding fabrication of all types of materials
Replacing boiler tubes, running new pipe lines and installing instruments, with all tubing
Perform shut down procedures or removing/repairing jacket pipe by testing with hydrostatic pressure
Performed as welding foreman and quality inspector
Performed as welding test shop examiner
Certified in all areas of NDE testing
Education
McCormick High School Diploma
U. S. Army Special Forces Training
Engineer Equipment Mechanic and heavy equipment training certification
Non-Commission Officer Leadership training
Engineer equipment operation certification
Heavy Equipment Logistics Training Certificate
Piedmont Technical College
Welding, Blueprint, Metalurgy Diploma
Georgia Trucking Institute Mechanics certification Certificate
Georgia Tech
Management Training, Team Concept, Leadership Training
Lean Manufacturing Training
York Tech Machinist, Blue Print Reading Level 1&2 DiplomaPhilip Jackson Jr
104 Woodland Avenue
Great Falls, SC 29055
McCormick High School Diploma
U. S. Army Special Forces Training
Engineer Equipment Mechanic and heavy equipment training certification
Non-Commission Officer Leadership training
Engineer equipment operation certification
Heavy Equipment Logistics Training Certificate
Piedmont Technical College
Welding, Blueprint, Metalurgy Diploma
Georgia Trucking Institute Mechanics certification Certificate
Georgia Tech
Management Training, Team Concept, Leadership Training
Lean Manufacturing Training
York Tech Machinist, Blue Print Reading Level 1&2 Diploma
Almeda University Bachelor Degree in Business Administration
Penn Foster University Motorcycle Technician Diploma
Midland Tech Work Place violence and Interview Training
Almeda University Bachelor Degree in Business Administration
Penn Foster University Motorcycle Technician Diploma
Midland Tech Work Place violence and Interview Training
References:
Mr Lawrence Moore 803-***-****
Fred Pauley 803-***-****
Dean Poag 803-***-****
Contact this candidate