Maintenance Electrical
Resume:
MADHAN NATARAJAN
(Diploma in Electrical Engineering)
*****.******@*****.***
Imeco Camp,
Room No. J-181, Al maria-Gayathy road,
Al Ruwais, Abu Dhabi.
Career Objective:-
Inquest of a position to utilize my skill in a challenging environment that promises a motivating and progressive career.
Leading the Operation & Maintenance Team for the Following Jobs:-
Control, Operation and Maintenance of Electrical Power System Equipment’s as per Safety Rules and Work Permit System in Oil Gas, Petrochemical plant Industries.
Performs Power and Distribution Transformers, MV&LV Switch gears and Breakers, MV&LV Motors, UPS system and Battery Banks, Diesel generator, VFD Drive, PTW & LOTO system, Golden Rules of Safety,
Performs routine, preventive and breakdown maintenance and Troubleshoot, repair / replace faulty electrical equipment and systems, equipment. Prepares and records all details of equipment maintenance, such as work carried out time involved etc.
Repairs and fabricates, as necessary any mechanical parts. Carried out cutting and above-mentioned jobs.
Complies with safety conditions and practice on all equipment on which he is working and observes the work permit regulations.
Experience of using sophisticated equipment’s:-
like, FLUKE Multimeter (AVO, 87, 89,725,179,8808A, Fluke 177 true rms multimeter), FLUKE 435 Power quality analyzer, FLUKE 66 IR thermometer, FLUKE 9062 phase rotation indicator, Omac DLRO-10 Digital low resistance OHMmeter, FOSTER SCITS100(Secondary Current Injection Tester), RCDT320, MEGGER MIT510/2 (5 KV), FLUKE 355 AC/DC Clamp meter, High voltage VLI HIPOT tester, MEGER MIT430 (1 KV), Digital Earth Tester, Phase Sequence Tester, Micro Ohm Meter, Bridge Megger, Vibration Meter, Live Line Tester up to 36 kv Earthing Discharge Rod, Secondary Injection Kit, Primary Injection Kit, Hi-Pot Test Kit (DC & AC), Digital Tachometer, Cell Tester Battery Load Tester, RCCB Tester, Oil BDV Tester Kit, Digital Low Resistance Ohm Meter,
Total Working Experience: - 8.9 year’s
Working Experience:
Name of Employ : IMECO (INT.MECH. & ELECT.CO LLC)
Period : Feb 2013 - Present
Designation : Electrical Technician
Client(s) : BOROUGE (ADNOC GROUP)
Project(s) : PETROCHEMICALS
Address : Ruwais, Abu Dhabi City, UAE
Duties & Responsibilities:
Performed PM Job of HV & LV Motors.
Performed PM Job of HV & LV Transformers 33KV/11KV and 11KV/0.415KV.
Performed Isolation & De-Isolation of HV and LV Switchgears. (HYUNDAI)
Performed PM Job of VSD, UPS, & Capacitor bank.
Performed Testing of Insulation Resistance & Winding Resistance of Motors & Transformers.
Performed VSD Troubleshooting and Repair.
Performed Motor Lubrication.
Performed Repair/Replaced of Plant Lighting.
Trained and Certified as Work Permit Receiver.
Troubleshoot of any critical job of Electrical Equipment.
Monitoring of VSD Motor, UPS, and Transformers as per checklist.
Inspect multifunction relay test of ABB series REF 630,REF 615,RET 630,REM 630
Inspect Functional test of Sew drive,Unidrive and Ansaldo’s Vsd’s (3.3 kv)
Inspect all transformer test (Dry Type and Oil Type transformer)
Inspect commissioning Test of AC and DC Ups (CEG)
Inspect Relay test of EICAR power factor controller
Attend Motor solo run of High voltage and Low voltage motors.
Inspect commissioning Test of Emergency Diesel standby Generator 800 kva to 1200 kva (CTM)
Maintenance, Break-down, Routine maintenance, preventive maintenance work attend of below Electrical Equipment’s
Name of Employ : Petrofac
Period : Apr 2012 to Dec 2012
Designation : Commissioning Electrical Technician
Client(s) : Sonatrach-Anadarko Association
(Groupement Berkine)
Project(s) : Oil and Gas
Address : Elmerk-Central Processing Facility, Algeria
Duties & Responsibilities:
Transformer oil filtration test, BDV test of transformer oil, DC Hi-Pot testing of power cables, knowledge of Relays such as Micom make Multiprotection Relays, etc.,
Repair or replace wiring, equipment, and fixtures, using hand tools and power tools.
Commissioning, Troubleshooting and maintenance & SAP-PM of below mentioned electrical systems.
Erection of Switchgears, Transformers, Generators, Breakers such as VCB, ACB, SF6 and UPS system, Batteries, Battery chargers, lightings etc.
Maintenance, Troubleshooting, Fault Rectification and Calibration of MOV’S.
Cathodic protection system Impressed Current & Sacrificial Anode types.
Earth pits and maintaining standard values.
Fire water pumps control panels.
ATN lamps, Fog Horns, Loud speakers, Thermo couples, RTD’s, Pressure switches.
Flame proof- Motors, Lighting systems, Control gears. Intrinsically safe equipments.
Testing of Protecting & Measuring equipment’s Multiprotection relays, Numerical Relays, CT’s & PT’s through primary and secondary injection methods.
Operation of testing & measuring equipment’s Meggar, CRM, BDV test kit, Hi pot kit, Cable fault locating kit, Oscilloscope, Scope meter, Multimeter etc...
Well experience in different types of Flame proof equipment’s, Hazards classification and protection for the equipment’s from different categories.
Name of Employ : Spectron Engineers Private Limited
Period : Mar 2009 to Apr 2011
Designation : Electrical Technician
Client(s) : Indian Oil & Gas
Project(s) : Oil and Gas
Address : Rajasthan, India
Duties & Responsibilities:
Operation & Maintenance of HV/ LV Switchgear 33kv/11kv/6.6kv/415v Circuit breakers such as VCB, SF6,ACB and Transformers, Isolators, Lightning arrestors, Earth switches & Earth pits, MCC, PCC All kinds of Motors & motor starters, Capacitor banks, Battery chargers, UPS, Batteries, Lightings,RTD.
After complete checks, updating the circuit diagrams with red corrections, completion of Commissioning reports and submission to the concerned authority
Maintenance of different type of UPS and Battery Banks NiCad and Lead Acid.
Operation, Maintenance and Overhauling of LT & HT Flameproof Vertical and Horizontal AC and DC Motors.
Operation, Maintenance of all motor Starters.
Testing the Generator Off-Load, On-Load up to the base load of the Generator.
Responsible for the pre commission and commissioning of all 3.3/6.6/11 KV transformers, Gas turbine, air compressors, emergency fire pumps and assist vendors.
Testing and commissioning of 30MW ABB generators, 11/ 6.6/ 3.3KV and 400V switch gears (SF6, ACB, VCB, and VC) and all protection systems.
Monitor daily work accomplishment, collect, distribute work order and suspend after work complete.
Duties of interpreting project and vendor schematic / wiring diagrams, completing inspection and function test, records and updating as-built drawings.
Commissioning Power Management System (PMS) distribution panels, motor with S&I motor manager and witness all testing like Hi-pot, primary and secondary injection, CT, VT, polarization index, ductor, megger etc.
Preventive cum Breakdown Maintenance of E.O.T Crane.(10.5T)
Troubleshooting and Fault Rectification of MCC and PCC Panels.
Operation, Maintenance in C/P 75 Hp Air Compressors.
Maintenance all type of Switchgears like ACB, OCB and VCB Circuit Breakers & Motor Starters like DOL, Star - Delta Starters and Auto Transformer Starters Equipped in MPCC,PCC and MCCS.
Name of Employ : Kentz Engineers & Constructors
Period : Apr 2010 to July 2010 (Shut-down)
Designation : Electrical Technician
Client(s) : KOC (Kuwait Oil Company)
Project(s) : Oil and Gas
Address : Al Rasheed-EPF-120
Duties & Responsibilities:
HI-Pot testing of power cables and checking of IR & PI value, checking of contact resistance of bus bars, breaker contacts, etc.
Termination at MCC & DCS panels & Motors. Installation of cable trays, internal wiring of Distribution Board & Wiring of multi store building. Lying of HV, LV & Control cables and Termination of the same.
Transformer oil testing, Simulation checking of control circuits. Maintenance of 11kv Vacuum Circuit breakers, LV Air Circuit Breakers, UPS system, Battery chargers and Batteries. Trouble shooting of all types electrical machineries, electrical circuits. Overhauling of HV & LV Motors, Knowledge of Protection Relays.
Name of Employ : CCIC (Consolidated contractors international company)
Period : Sep 2006 to Jan 2009
Designation : Commissioning Electrical Technician
Client(s) : Qatar Gas QGX-II LNG
Project(s) : Oil and Gas
Address : Ras Laffan, Qatar
Duties & Responsibilities:
Attended the H2S & BA Familiarization course Conducted by Qatar international safety center, Qatar
Ensuring strict compliance with PTW & LOTO system for all work groups in the section.
Pre-Commissioning, Operation & Maintenance and Trouble shooting of Electrical Equipment’s and systems utilities with the followings.
Power and Distribution Transformers 66/33KV, 33/6.6 KV, 6.6/0.433KV ABB, SIEMENS.
33KV, 11KV, 6.6 KV and 440 Volts Siemens, ABB & L&T, VCBs and ACB s.
Protection relays of all types make like Siemens, ABB, L&T and Alstrom.
Switch Boards and Switch gear systems 33KV, 11KV, 6.6KV, 430 Volts. Make like Siemens, ABB, L&T.
HT & LT Motors make Siemens, ABB, Alstrom manufactures.
Motor Operated Valves (MOV’s).
Verify all Equipment’s and collecting the Punch list & Observation points and submitting to Supervise.
Pipe line Heat tracing system Raychem, SEHMS System.
ATN lamps, Thermo couples, RTD’s, Pressure switches.
Operation of testing & measuring equipment’s Meggar, CRM, BDV test kit, Hi pot kit, Cable fault locating kit, Oscilloscope, Scope meter, Multi meter etc.
Maintenance of Power Transformer up to 66KV & Control Transformer and its operating Systems.
Taking Earth Resistance using Earth Megger, Generally earth resistance of the total grid should be less than 1.0 Ohms which is acceptable for safe operation in industries.
Name of Employ : Technomech Engineers
Period : Jan 2005 to Mar 2006
Designation : Electrical Technician
Client(s) : ONGC (Oil Naturel Gas Offshore)
Project(s) : Oil and Gas
Address : Mumbai Offshore, India
Duties & Responsibilities:
Permit to work system as per ONGC & HSE Policy
Carried out routine maintenance, predictive maintenance and
Break down maintenance of electrical systems and equipment’s like motors, Transformers, switchboards, vfd panels, ups systems, reactive power equip etc.
Report time-to-time abnormalities and failure and take corrective actions according to the inspection to the control room.
Maintenance of power & Distribution Transformers (110/3.3 KV,7.5 MVA, 3300/415 V – 1250 KVA, 1600 KVA)
Maintenance of LT & HT Induction Motors (Up to 6.6 KV, 2750 KW)
Maintenance of Battery & Battery Charges and AC&DC UPS System
Maintenance of fire alarm systems, low and medium voltage switchgears and breakers, cathodic protection system
Troubleshooting and Fault Rectification of MCC and PCC Panels
Operating and plant process reliably at maximum energy level.
Commitment to environment protection.
Professional Trainings:-
Work Permit System Course attended at Qatar Gas (LNG) Safety Department and holding Executing Authority Card for all types of work permits.
Successfully completed a Training Course in FIRST AID from Emergency Medical Services, ministry of health, Kuwait.
Attended the H2S & BA Familiarization course Conducted by Qatar international safety center, Qatar.
STOP CARD SAFETY TRAINING OBSERVATIN PROGRAM.
First Aid & Electrical Safety Training.
Core Expertise:-
AutoCAD, MS word, MS Office, Microsoft Excel Worksheet and Sap.
Knowledge of Windows family.
Intensive Training Program course in CNC Lathe & Milling.
Indian Light Vehicle Driver license
Personal Data:
Age: 30 years old Height: 5’ 9
Sex: Male Weight: 72 kgs.
Civil Status: Married Nationality: Indian
Date of Birth: June 01, 1986
Languages Known: English, Hindi, Tamil, and Malayalam
Passport Details:
Passport no. M-4762107 Place of issue: Abu Dhabi
Date of issue: 17.01.2015 Date of Expiry: 16.01.2025
Declaration:-
I hereby declare that all the above mentioned information is true to the best of my knowledge
and I bear the responsibility for the correctness of the above mentioned particulars.
Place : Abu Dhabi yours faithfully,
Date :
[N.MADHAN]
Contact this candidate